Fire stopping in Brantham
Need fire stopping in Brantham? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Unsealed openings around new pipes and cables
- Open linear gaps along the top of fire-resisting walls
- Seals that don’t match their tested detail
Fire stopping in Brantham
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Doing it in-house
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
About our fire stopping in Brantham
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. We work to the product’s tested detail for every seal, not a rule of thumb. If you are dealing with fire-stopping items raised at inspection or handover and head-of-wall gaps with no fire seal, we can help, whatever the surface. A single leaking joint is often how a building in Brantham first comes to us: we look at the rest while we’re there and tell you what we find.
Smaller places such as Brantham still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Brantham (CO11)
- Wider area
- Essex
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
On site: what to expect
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Jobs in and around smaller places like Brantham are normally planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Old or wrong materials are cut out.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Preparing the site
- Let building users know which areas are affected
- Let us know about inductions and permits
- Make sure the joints can be reached
Ask for a quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call the office on 01277 525 020 or send photos by email.
Advice
Fire stopping in Brantham: the local picture
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Brantham has two care or nursing homes no more than 2 miles away. Where new services have gone through compartment walls in a care setting, the gaps need the specified product. We install fire-rated sealant to the tested detail where it is specified.
Older community buildings such as Church of St Michael and All Angels that have been rewired or given new heating can have service gaps through walls worth checking against the specification. On estates like Brantham Mill Industrial Estate (0.9 miles south-west of Brantham), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal. Holiday works at schools like Brooklands Primary School often leave service openings to seal before pupils return.
Brantham is in Essex. We cover commercial sites throughout Brantham, whether it’s a single job or part of a planned programme. Across Essex, 644 places are covered, Brantham among them. Sites around London have their own page, about 59 miles away.
Work on service penetrations is covered throughout CO11, whatever the building. Among the streets we cover are The Street, Birch Drive and Blenheim Close, and sites on any of them can send details for a fixed quote. Brantham sits on or close to the A137, which helps when planning parking and deliveries for the job. Close to Brantham, our area also takes in Cattawade (1 mile south), East End (1 mile north-west), Manningtree (2 miles south), Lawford (2 miles south) and Mistley (2 miles south-east). Bigger towns within reach include Colchester (9 miles south-west), Clacton-on-Sea (12 miles south), Harwich (9 miles east), Camulodunum (10 miles south-west), Greenstead (8 miles south-west) and Wivenhoe (9 miles south-west).
What’s near Brantham
We work on buildings around The Ark pub and Manningtree High School, among other places. For rail, the closest station is Manningtree station, about 1.5 miles south-west of the centre. A little further out are The Munnings Museum (3.2 miles west) and Little Wenham Castle (3.5 miles north-west). Open spaces near Brantham include Cattawade Marshes and Alton Water.
Towns and villages near Brantham
Other services in Brantham
Cost factors for service penetrations
Each job is priced on its own details. The things that drive the figure:
- Access and working height
- Removal of failed or old sealant
- Location, for remote and island sites
- The size and state of each joint
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.
What to include in your enquiry
To price the job accurately, we need to understand the site. Useful things to include:
- Any specification or named product
- The postcode of the building
- Access details, including height
- A wide shot and a close-up of the area
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send photos by email.
Questions we’re asked in Brantham
Is Brantham too small for you to travel to?
Not at all. Brantham is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do you work in occupied care homes around Brantham?
Yes. Care settings are planned area by area, at times agreed with the home. Noise and disruption are kept to a minimum.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Which standards are fire seals tested to?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. An EI 60 seal kept its integrity and insulation for 60 minutes as tested and the installation has to match the test.
How long will the new sealant last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
What happens if it’s left?
The longer openings stay, the more there tend to be: each new service adds to the list. A schedule that is dealt with regularly stays manageable and avoids a much larger catch-up later. Converted and older buildings near places like Brantham tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why us?
- Failed material removed, not covered up
- One contact handling all your sites
- Constructionline member for supplier checks
- Specification-led, product-correct work
Read our cost guide and how we’re accredited.
For managing agents and facilities managers
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Issuing fire ratings or certificates for seals
- Writing the fire-stopping specification
- Walls or floors that aren’t fire-resisting to begin with
If in doubt, give us a call on 01277 525 020 or email drawings and photos and we will say what we think before you book.
Where we work in Brantham
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
- Linear gaps at wall heads