Fire Stopping in Almodington
Planning work on a service penetration in Almodington? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
- Non-fire-rated filler around services
Fire stopping for businesses in Almodington
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Quoting for work in Almodington
A fixed quote reflects the actual work. It takes account of:
- Whether old sealant has to be cut out first
- Phasing around occupants
- Backing rod, priming and other preparation
- Any access equipment needed
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What we need to price the job
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Rough lengths or quantities, or drawings if you have them
- The product your specification calls for
- Where the site is, with the postcode
- What the building is and how it’s used
Specifications, drawings and tender packages are welcome with any enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Fire stopping for commercial buildings in Almodington
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail. The enquiries we see most involve snag lists that include open service penetrations and unsealed openings around new pipes and cables, across cable penetrations, joints between fire-resisting walls and floors and small duct penetrations where the tested detail allows. For commercial sealant work in Almodington, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Rural conversions around Almodington can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Location
- Almodington (PO20)
- Region
- West Sussex
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Common questions from Almodington clients
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Almodington?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is Almodington off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
How long does a typical visit take?
We plan the time on site around your programme and access. You will have an expected duration with the quote.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it.
Will your applicators have CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months.
Signs you need fire stopping in Almodington
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls, which then have to be put right.
If one of these sounds familiar, it’s time for a closer look:
- Unsealed openings around new pipes and cables
- Openings found when ceilings come down for a refit
- Fire seals cut back for extra cables and never reinstated
- Fire-rated sealant that has cracked or shrunk back
In a building such as Earnley Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Before you book anyone
- Proof of insurance
- How the existing material will be dealt with
- Their pre-qualification and accreditations
- Their approach to joint depth and backing
For managing agents and facilities managers
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Penetration seals near Almodington
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Almodington is about 59 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal.
Holiday works at schools like Birdham CE Primary School often leave service openings to seal before pupils return. For a building at a site such as Enborne Business Park, 2.1 miles south-east of Almodington, a check of penetration seals after each fit-out is good practice.
Almodington is about 4 miles north-west of Selsey, in West Sussex. If you are looking for fire stopping in Almodington, we can help. We work across 373 places in West Sussex, from busy centres to rural villages. There’s a separate page for Portsmouth, roughly 11 miles from Almodington.
Work on service penetrations is covered throughout PO20, whatever the building. Buildings on Second Avenue, Batchmere Road and Third Avenue are within our area. Close to Almodington, our area also takes in Somerley (1 mile north-west), Earnley (1 mile south-west), Birdham (1 mile north), Highleigh (1 mile east) and Shipton Green (2 miles north-west). Further afield, our area takes in Bognor Regis (6 miles east), Chichester (5 miles north-east), Selsey (4 miles south-east), Littlehampton (13 miles east), Rustington (14 miles east) and Portfield (5 miles north-east).
Landmarks near Almodington
For rail, the closest station is Chichester station, roughly 4.2 miles north-east. Other landmarks nearby include Chichester Castle (4.9 miles north-east) and St Richard's Hospital (5.2 miles north-east). For a walk, there’s Pilsey Island.
After the work
Sealant joints are maintenance items, and how long they last depends on how they’re treated. Our advice:
- File the specified details where the next contractor can find them
- Report damaged or disturbed seals as soon as they’re spotted
- Agree the fire-stopping specification before services go in
- Leave fire sealant to cure fully before covering it
New services after handover are a common way fire stopping gets breached. A short check at the end of each job saves a long hunt later.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job compared with dozens found at once.
From enquiry to sign-off
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed before we move to the next. For a building around Almodington, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- For older buildings, check the asbestos register before work
- Send your site hours and access windows
- Confirm the product named in the specification
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or call 01277 525 020 or email the details over to discuss it first.
Advice
Why deal with it now?
An improvised seal can look finished while offering no tested performance. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. Halls, stores and units around places like Almodington may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
What you get with us
- Health and safety: CHAS accredited
- Old sealant cut out, never sealed over
- CSCS-carded applicators
- One phone line for London, the South East and Scotland
See our cost guide or how we’re accredited.