Uplees facade sealing
Planning work on a facade joint in Uplees? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Gaps between rainscreen or cladding panels
- Air leaks through failed facade joints
- Patch repairs that keep failing
Facade sealing for businesses in Uplees
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing for commercial buildings in Uplees
Some clients need every window on a block resealed; others need a few leaking frames sorted. The approach doesn’t change with the size: old sealant out, faces cleaned, depth set and a new bead tooled in. A 12-month guarantee applies to our workmanship. If you are dealing with staining on stone next to old sealant and leaks at window and door perimeters, we can help. Looking for mastic applicators who cover Uplees? Mastic Doctor has worked for contractors, FMs and building owners since 2005, with CSCS-carded applicators.
Sites around smaller places like Uplees can be a fair drive from suppliers, so we come with everything the package needs. Send drawings or photographs and the programme and we’ll quote to suit.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Uplees (ME13)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
Aftercare for building managers
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Walk the elevations once or twice a year
- Note when each elevation was last resealed
- Keep sills, gutters and drainage paths clear
- Plan facade sealing alongside redecoration
Anything drilled through a facade joint breaks the seal. Make sure the joint is resealed afterwards using a matching sealant.
Get the joint design right when resealing: the right width, backing rod and a sealant with enough movement capability. A well-designed joint lasts longer than a like-for-like copy of a failed one.
Work for main contractors and building owners
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Backing rod, priming and other preparation
- The site’s rules and procedures
- The total length or number of joints
- Whether the work must be split into stages
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Rough lengths or quantities, or drawings if you have them
- How the joints are reached, and at what height
- The postcode of the building
- Any dates the work must fit around
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, give us a call on 01277 525 020 or email a schedule or drawings.
Nearby places to Uplees
Other services in Uplees
Facades, frames and programmes in Uplees
Uplees lies within about 1 mile of the sea. Facades and window perimeters on coastal schemes take more wind-driven rain, and salt air nearer the shore, so we check the specified product suits the exposure before the first bead. The South East is one of the drier parts of the UK. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so the external programme keeps a little slack.
When a school such as Queen Elizabeth's Grammar School is extended or refurbished, the mastic package is often squeezed into the holidays. For contractors building in or near Uplees, we seal to the drawings, the specification and the programme.
Uplees is about 2 miles north of Faversham, in Kent. Across the ME13 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 931 places across Kent fall within our area, Uplees among them. We also cover London, around 43 miles from Uplees.
Commercial sites across ME13 are covered for facade joints. Just outside Uplees, we also work in Oare (1 mile south-east), Four Oaks (2 miles south-west), Davington (2 miles south), The Brents (2 miles south-east) and Deerton Street (2 miles south-west). A short drive away, we cover Ashford (14 miles south), Canterbury (10 miles south-east), Sittingbourne (6 miles west), Whitstable (7 miles east), Herne Bay (12 miles east) and Minster (6 miles north-west).
Near you in Uplees
Around Uplees, our work takes us to commercial buildings near Three Mariners Inn and Oare Marshes, among other places. Uplees’s nearest station is Faversham station, roughly 2.4 miles south-east of the centre. Well-known places in the area include Newnham Castle (4.9 miles south-west).
Common questions from Uplees clients
Our building in Uplees is near the coast: does that change the sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Will you fit the mastic around our build programme in Uplees?
Yes, we work to the programme and the sequence the site sets. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, which many sites require.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Do you seal facades in winter?
Rain and frost can pause external sealing. The programme allows for it and we tell you if the forecast changes things as the work goes on.
Do you replace failed glazing units?
No. A glazing contractor handles that. We reseal window perimeters, panel joints and frame-to-structure perimeters.
Do we need an asbestos check before resealing?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register. Suspect material is left alone until it has been tested.
How a job runs
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. For work around Uplees, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- We walk the finished joints with you before handing over.
What we need from you
- Share the asbestos register for older buildings
- Agree which areas must stay open
- Clear stock, furniture or equipment away from the joints
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Advice
Doing it in-house
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
When it isn’t the sealant
We check first that sealant really is the fix. It isn’t the answer for:
- Replacing glass or failed glazing units
- Movement beyond what any sealant can handle
- Providing access systems for the work
If in doubt, speak to us on 01277 525 020 or send photos by email and we will say what we think.
Joints and surfaces we work on
- Cladding panel joints
- Window and door perimeters
- Shopfront frames
- Perimeter joints where frames meet the structure
- Coping and flashing joints
- Stone and brick facade joints