Facade and window perimeter sealing in Sheldwich, Kent
Planning work on a facade joint in Sheldwich? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Damp patches beside frames after rain
- Perimeter joints where frames meet the structure
- Perimeter sealant that has split or peeled away
Facade sealing in Sheldwich
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Facade sealing in Sheldwich, done properly
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. The enquiries we see most involve staining on stone next to old sealant and weathered facade joints that have lost their grip, on coping and flashing joints, stone and brick facade joints and shopfront frames. A single leaking joint is often how a building in Sheldwich first comes to us: we look at the rest while we’re there and tell you what we find.
For a site near Sheldwich, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photographs and the programme and we’ll quote to suit.
Building owners and contractors get the same cover: twelve months on the work we carried out. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Where
- Sheldwich (ME13)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Should maintenance staff do it?
Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Questions about Sheldwich
Is Sheldwich too small for you to travel to?
Not at all. Sheldwich is within our area. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Will you fit the mastic around our build programme in Sheldwich?
Yes, we work to the programme and the sequence the site sets. Let us know which documents your site asks for, and we will confirm them alongside the quote.
Which sealant will you use?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators, as many construction sites ask for.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
What do you charge?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote and we will price it properly.
Is your workmanship covered by a guarantee?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
Common problems we fix in Sheldwich
Sun, rain and temperature swings wear facade sealant down over the years. UV and weather harden the sealant until it can’t stretch with the building, then it splits or peels.
Look out for the following:
- Old perimeter mastic that has dried out
- Unsightly perimeter sealant on a visible elevation
- Cladding panel joints that have opened up
- Sealant pulling away from frames or panels
Historic houses such as Belmont House and Gardens (to the west of Sheldwich) are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products.
Comparing quotes
- Will failed sealant be removed rather than covered?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What level of public liability insurance do they hold?
- Which product they’ll use, and why it suits the joint
Towns and villages near Sheldwich
More services for Sheldwich
How the job changes by surface
Precast concrete panels
Joints between precast panels carry real movement. We use a sealant with the right movement capability, set over backing rod with primer where the product requires it.
Perimeter joints at frames and structure
The joint around a framed system, where it meets the structure, needs sealant. Our work is that perimeter joint, not the framing or glazing itself.
Facade sealing in Sheldwich: the local picture
The South East is one of the drier parts of the UK. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so external mastic is timed for workable conditions and agreed with the site manager. At about 45 miles from central London, Sheldwich is within reach of the capital. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, so mastic packages have to keep pace with busy programmes.
For contractors at a school such as Sheldwich Primary School, sealing has to be finished before term starts.
Sheldwich is about 3 miles south of Faversham, in Kent. We cover commercial sites throughout Sheldwich. Sheldwich is one of 931 places in Kent on our list for facade joints. We also cover London, around 45 miles from Sheldwich.
Business premises anywhere in ME13 are within our area for facade joints. Streets here include Ashford Road and Lees Court Road. Just outside Sheldwich, we also work in Sheldwich Lees (1 mile south-east), North Street (1 mile north), Badlesmere (1 mile south), Throwley (1 mile south-west) and Throwley Forstal (2 miles south-west). Further afield, our area takes in Maidstone (15 miles west), Ashford (9 miles south), Canterbury (9 miles east), Sittingbourne (8 miles north-west), Whitstable (8 miles north-east) and Faversham (3 miles north).
What’s near Sheldwich
In Sheldwich, that means premises near The Abbey School. For rail, the closest station is Selling station, about 2.6 miles east of the centre. Nearby you’ll also find Newnham Castle (3.6 miles west).
What happens if it’s left?
Failed joints let in more than water: occupants notice draughts and cold spots around windows. Resealing deals with the draught as well as the leak. Older rural buildings around Sheldwich move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why us?
- Colour options checked against the specified product
- Fully insured, including public liability cover
- CSCS-carded applicators
- Joints cleaned back to sound surfaces
See how commercial sealant jobs are priced or how we’re accredited.
Diagnose, treat, sign off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed before we move to the next. For work around Sheldwich, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Tell us what induction or permit system the site runs
- Make sure the joints can be reached
- Share your working hours and any access restrictions
Quotes
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.
Advice
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Clear debris that holds water against joints
- Check the asbestos register before old mastic is disturbed
- Inspect facade joints on a regular cycle
- Report water ingress at frames as soon as it shows
Let the new sealant cure before washing the facade or windows near it. Keep high-pressure jets and strong chemicals away from new sealant.
In pre-2000 buildings, check the asbestos register before old sealant is cut out. Some older mastics contain it, and if it’s suspected, we stop until it has been tested.