Facade Sealing contractors in Mundy Bois
Facade joint and window perimeter sealing on commercial buildings in Mundy Bois and across Kent. CHAS accredited and fully insured, with a 12-month guarantee.
- New sealant peeling off old mastic
- Unsightly perimeter sealant on a visible elevation
- Draughts around frames and panels
Need facade sealing in Mundy Bois?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Surface by surface
Window and door perimeters
Perimeter joints move as frames expand and contract in the sun. The rod limits depth, leaving the bead able to flex without tearing.
Render and coated surfaces
Paintable sealants exist for joints that will be coated. The choice depends on the specification and finish.
Facade sealing in Mundy Bois, done properly
External sealing depends on the weather more than most trades. The sealant needs a dry joint and temperatures inside the maker’s limits. We build that into the programme and tell you if the forecast changes the plan. If you have damp patches beside frames after rain and hard, chalky sealant that no longer flexes, we can help. One point of contact handles commercial sealant work in Mundy Bois from the first photographs to the final walk-round, whether it’s one building or several.
For a site near Mundy Bois, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Send drawings or photos and the programme and we’ll quote to suit.
We stand by our work: 12 months, guaranteed. That covers our preparation and application, and if something we did falls short, we return to it.
- Place
- Mundy Bois (TN27)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Also near Mundy Bois
Other services in Mundy Bois
FAQs: Mundy Bois
Is Mundy Bois off your patch?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
What paperwork can you provide for a job in Mundy Bois?
Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. We’re CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Can you just add new sealant on top?
No. New sealant won’t hold on old sealant, so the old bead is cut away and the faces are cleaned before resealing. Nothing else gives a bond that lasts.
Do we need an asbestos check before resealing?
In older non-domestic buildings, old sealant can contain asbestos. Check the asbestos register or survey before it is disturbed. Removal of asbestos isn’t something we do.
Can you look at water coming in around a frame?
Yes. Photos are often enough to start, followed by a visit if needed. Failed perimeter sealant is a common cause, but not the only one, and we’ll be honest about which it is.
Do you use silicone for external joints?
Most facade and window perimeter joints take a low-modulus neutral-cure silicone. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others, as the specification or substrate requires.
Can you work on upper floors?
That varies with the building and the access on offer. Share what access exists or is planned when you send details.
When to bring in a specialist
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Facade sealing around Mundy Bois: what changes locally
Mundy Bois is about 42 miles from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, so mastic packages have to keep pace with busy programmes. Mundy Bois is in the South East, one of the UK’s drier regions. Even so, frost and condensation on steel and glass are common on winter mornings, which is why external dates are agreed with the site manager.
With historic properties like Godinton House, 5 miles to the east of Mundy Bois, in the area, refurbishment work often meets old masonry that needs compatible sealants.
Mundy Bois is about 7 miles north-west of Ashford, in Kent. Across the TN27 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Across Kent, 931 places are covered, Mundy Bois among them. London is covered too, around 42 miles from Mundy Bois.
Anyone looking for facade sealing in TN27 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Munday Bois Road, Kingsland Lane and Greenhill Lane or close by, we can quote for facade joints. Sites close to Mundy Bois are covered too, including Newland Green (1 mile west), Egerton Forstal (1 mile west), Egerton (1 mile north), Potter's Forstal (1 mile north-west) and Pluckley Thorne (1 mile south-east). Bigger towns within reach include Maidstone (10 miles north-west), Ashford (7 miles south-east), Sittingbourne (11 miles north), Faversham (12 miles north-east), Kings Hill (15 miles north-west) and Davington (12 miles north-east).
Around Mundy Bois
The nearest railway station is Pluckley station, about 2 miles south-east of the centre. A little further out are Coldbridge Castle (1.7 miles north-west).
Commercial clients in Mundy Bois
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
For main contractors, we work as the sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
What affects the price in Mundy Bois
Each job is priced on its own details. The things that drive the figure:
- The product specified
- Any access equipment needed
- Working within restricted access windows
- Travel to remote or island sites
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Tell us how the joints are reached and call for a quote.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Whether the building will be occupied during the work
- The site address and postcode
- Asbestos survey details if the building is older
- The product your specification calls for
For a fixed quote, call the office on 01277 525 020 or send photos by email with the site address and an outline of the work. You can also send details through our quote form.
Common problems we fix in Mundy Bois
Overlaying old sealant is a common shortcut that fails quickly. Fresh silicone won’t stick to cured silicone, so the new bead peels away within a season or two.
Any of the following is a good reason to get the joints checked over:
- Gaps between rainscreen or cladding panels
- Cold air coming in at window perimeters
- Damp patches beside frames after rain
- Unsightly perimeter sealant on a visible elevation
School extensions, at buildings such as Egerton Church of England Primary School, normally run to the summer holidays, mastic included.
Questions to ask before you book
- What site paperwork they can supply
- How the joint faces will be prepared and primed
- How the existing material will be dealt with
- Whether their applicators hold CSCS cards
Our process
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. If others near Mundy Bois need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full.
- Primer goes on where the product data asks for it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- The finished joints are checked with you.
Before we start on site
- Send any specification or drawings in advance
- Tell staff and tenants when we will be in
- Flag any permit to work we will need
Ask for a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.