Facade Sealing in Burham
Planning work on a facade joint in Burham? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Patch repairs that keep failing
- Unsightly perimeter sealant on a visible elevation
- Facade joints cracked through the middle
Facade sealing across Burham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Facade sealing in Burham
We don’t install glazing systems or replace glass. We handle the sealant joints that surround those elements: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds. The enquiries we see most involve failed sealant on precast panel joints and unsightly perimeter sealant on a visible elevation, on perimeter joints where frames meet the structure, coping and flashing joints and cladding panel joints. One point of contact handles commercial sealant work in Burham from the first photographs to the final walk-round, for single jobs and planned programmes alike.
In the countryside around places like Burham, conversion schemes put new frames into old stone, flint, brick or timber. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Burham (ME1)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Facades, frames and programmes in Burham
A 2-mile radius around Burham takes in a number of hotels. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades. Rainfall across the South East, Burham included, is lower than in many parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so we time external mastic for dry faces and agree it with the site team.
For contractors on a campus like University for the Creative Arts - Rochester, 3.7 miles to the north-east of Burham, facade and perimeter sealing has to fit around students and term dates. Projects at schools like Burham Church of England Primary School work to term dates, so mastic is programmed tightly.
Burham is about 3 miles south-west of Chatham, in Kent. Our applicators travel to Burham for work on facade joints. Burham is one of 931 places in Kent on our list for facade joints. Sites around London have their own page, about 27 miles away.
Anyone looking for facade sealing in ME1 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Buildings on New Road, St Mary's Walk and Brisley's Row are within our area for facade joints. Nearby places we also cover include Scarborough (1 mile north-west), Eccles (1 mile south), Peters Village (1 mile north-west), Holborough (2 miles west) and Wouldham (2 miles north-west) for facade joints. Further afield, our area takes in Maidstone (5 miles south-east), Sittingbourne (11 miles east), Dartford (13 miles north-west), Sevenoaks (13 miles west), Gravesend (8 miles north-west) and Tonbridge (13 miles south-west).
Local landmarks in Burham
Locally, jobs take us to sites close to The Windmill pub, Burham Marsh and The Holmesdale School, among other places. Burham’s nearest station is Snodland station, about 1.3 miles west. A little further out are Allington Castle (3 miles south-east) and Medway megaliths (1.3 miles south-east). Green spaces nearby include Burham Down and Blue Bell Hill.
Common problems we fix in Burham
New sealant run over old sealant rarely holds. Fresh silicone won’t stick to cured silicone, so the new bead peels away within a season or two.
Things that normally lead to an enquiry:
- Perimeter joints where frames meet the structure
- Gaps between rainscreen or cladding panels
- Staining on stone next to old sealant
- Leaks at window and door perimeters
For a contractor working at a hospital such as Spire Alexandra Hospital, 2 miles east of Burham, perimeter and facade sealing is planned around patients and deliveries.
What your quote should include
- Will CSCS-carded applicators be on site?
- How the joint faces will be prepared and primed
- Will failed sealant be removed rather than covered?
- Their plan for phasing and protecting the area
What happens if it’s left?
Leaving failed perimeter sealant also makes the eventual job bigger: wet edges break down, so repairs may be needed before resealing. Early action keeps it simple. Around Burham, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
What a job costs comes down to how many linear metres there are, what has to come out first and the access. Call for a fixed quote when you are ready.
What you get with us
- Public liability insurance in place
- Colour agreed before work starts
- A Constructionline member, so easy to vet
- Coloured sealants to suit the setting, where available
Read what affects the cost and our accreditations.
How a job runs
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. Where the sealant needs time to cure before use, we tell you and sign the area. Jobs in and around smaller places like Burham are typically planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- We start with photographs, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Let us know about inductions and permits
- Move anything stored against the joints
- Explain the parking and delivery arrangements
Getting a fixed quote
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or phone 01277 525 020 or email drawings and photos to discuss it first.
Advice
Different surfaces, different methods
Precast concrete panels
Joints between precast panels carry real movement. We use a sealant with the right movement capability, set over backing rod with primer where the product requires it.
Perimeter joints at frames and structure
These frame-to-structure joints take a lot of movement and weather. We cut them out, prepare both faces and reseal to the specification using a sealant classified for that use.
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Render or concrete edges that have broken away
- Leaks from roofs, gutters or failed flashings rather than sealant joints
- Movement beyond what any sealant can handle
Not sure which it is? You can ring 01277 525 020 or email a schedule or drawings and we’ll tell you honestly before you book.
Where we work in Burham
- Coping and flashing joints
- Cladding panel joints
- Window and door perimeters
- Shopfront frames
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
Quoting for work in Burham
We price every job individually. The things that drive the figure:
- Induction, permit and paperwork requirements
- Backing rod, priming and other preparation
- The product specified
- Phasing around occupants
A quote for facade joints depends on how many there are, their condition and the access, and any specification that applies. Call for a quote.
What we need to price the job
We can often quote from photos and a few details. It helps to include:
- Specification clauses that apply
- Approximate linear metres or a joint schedule
- Access details, including height
- Where the site is, with the postcode
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, ring 01277 525 020 or email a schedule or drawings.
Common questions from Burham clients
Can you work at a site such as Lower Bell Industrial Estate, by Burham?
Yes. We cover Burham and the area around it, including industrial estates, business parks and retail parks such as Lower Bell Industrial Estate. Photos and a short description are enough for a first look.
Is Burham too small for you to travel to?
Not at all. Burham is within our area. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
How long does a typical visit take?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
Do you seal on top of existing sealant?
No, never. Overlaying old sealant is a frequent cause of early failure, so it all comes out first.
When is resealing likely to be due?
There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Is the work guaranteed?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.