Facade and window perimeter sealing in Bolney, West Sussex
We carry out facade joint and window perimeter sealing on commercial buildings in Bolney. Send photos or drawings for a fixed quote.
- Hard, chalky sealant that no longer flexes
- Facade joints cracked through the middle
- Air leaks through failed facade joints
Facade sealing for Bolney sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Common problems we fix in Bolney
The wrong product causes its share of trouble: acetoxy-cure silicone may mark stone or corrode certain metals, and an interior product won’t last outdoors. Neutral-cure, facade-grade products are what most external joints need.
These are often picked up first by site or facilities staff:
- Draughts around frames and panels
- Sealant pulling away from frames or panels
- Old perimeter mastic that has dried out
- Perimeter joints where frames meet the structure
Hospital estates such as The Dene Hospital, 2.6 miles south-east of Bolney, tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.
Questions to ask before you book
- The named product and why it was chosen
- What site paperwork they can supply
- How they’ll work around occupants
- Will failed sealant be removed rather than covered?
Facade sealing in Bolney
Our facade sealing work covers external facade joints, window and door perimeters, cladding panel joints and the perimeter joints where frames meet the structure. Where sealant is the specified fix, we also take on coping and flashing joints. Most enquiries involve unsightly perimeter sealant on a visible elevation and facade joints cracked through the middle, on coping and flashing joints, perimeter joints where frames meet the structure and stone and brick facade joints. Looking for mastic applicators who cover Bolney? We have been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Conversions of older rural buildings near smaller places such as Bolney bring stone, flint, brick and timber up against new glazing. A product that grips an irregular face, with a colour that suits the building’s character, is typically what’s needed.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Bolney (RH17)
- Wider area
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Do you take on work at healthcare sites like The Dene Hospital?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
Is a smaller place like Bolney outside your area?
No. Places such as Bolney are covered as much as the big towns. London and every South East county are within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Do you guarantee your work?
Yes, for 12 months. If a joint fails because of how we installed it, we come back and put it right.
Can you work while the building is occupied?
In most cases, yes. Phased work can be planned so areas stay in use.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it, flagging anything that needs clarifying.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit.
Which sealant do you use on facades?
Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others, as the specification or substrate requires.
Different surfaces, different methods
Window and door perimeters
Perimeter joints move as frames expand and contract in the sun. The rod limits depth, leaving the bead able to flex without tearing.
Brick and stone facades
Joints in natural stone need care to avoid staining. The specified stone-compatible sealant is what we use, with masked edges for a clean line.
Building and refurbishing in Bolney
There are a number of hotels within about 2 miles of Bolney. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up. Bolney is in the South East, one of the UK’s drier regions. Winter mornings still bring frost and condensation on frames and panels, so the external programme keeps a little slack.
School extensions, at buildings such as Bolney CofE Primary School, normally run to the summer holidays, mastic included. New units and refits on sites such as Crosspot Industrial Estate (0.8 miles south-west of Bolney) need their panel and perimeter joints sealed to the specification.
Bolney is about 4 miles north-west of Burgess Hill, in West Sussex. Our applicators travel to Bolney for work on facade joints. Bolney is one of 373 places in West Sussex on our list for facade joints. For work in that direction, see our Brighton page.
Business premises anywhere in RH17 are within our area for facade joints. We cover commercial and managed buildings on The Street, Cherry Lane and Top Street. Sites close to Bolney are covered too, including Crosspost (1 mile south-west), Twineham Green (2 miles south), Twineham (2 miles south), Wineham (3 miles south-west) and Kent Street (3 miles south-west). Nearby towns on our patch include Crawley (8 miles north), Horsham (7 miles north-west), Worthing (15 miles south-west), Haywards Heath (5 miles east), Burgess Hill (4 miles south-east) and East Grinstead (12 miles north-east).
Landmarks near Bolney
The nearest railway station is Wivelsfield station, about 4.1 miles south-east. Nearby you will also find The Dene Hospital (2.6 miles south-east) and Cuckfield Museum (2.6 miles east). For a walk, there’s Blunts Wood and Paiges Meadow.
Looking after the joints
Once the work is signed off, these steps help:
- Keep the sealant details on the building file
- Brief window cleaners about newly sealed joints
- Clear debris that holds water against joints
- Avoid patch repairs on failed facade joints
If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Make sure the joint is resealed afterwards using a matching sealant.
Planned resealing is cheaper than reacting to leaks. Regular checks let you renew joints before water gets in.
For managing agents and facilities managers
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Bolney. Several sites can go on one quote, which keeps the paperwork simple.
Why deal with it now?
Each spell of rain drives water past a failed facade joint. Behind the frame, that can mean damp plaster, stained ceilings, corroded fixings and damaged insulation. Resealing now costs less than repairing interiors later. Older rural buildings around Bolney move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
There’s no price list, since every building and every scope is different. Call for a quote.
Why appoint us
- Commercial sealant work since 2005
- Public liability insurance in place
- CHAS accredited contractor
- Coloured sealants to suit the setting, where available
Take a look at our cost guide or our accreditations and insurance.
How a job runs
We schedule the visit to fit the site hours and access windows you give us. On the day, the work area is kept contained and tidy, and your contact hears from us before we move to the next area. Smaller jobs around Bolney can be grouped with others nearby. You’ll have a fixed quote before work starts.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Before we start on site
- Tell us your opening times and when work is allowed
- Explain the parking and delivery arrangements
- Move anything stored against the joints
Quotes
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or use the quote form.