Expansion Joint Sealing in Wyck
We carry out expansion and movement joint sealing in walls, decks and floors in Wyck and the surrounding area. Send details for a fixed quote.
- Layers of sealant in a movement joint
- Torn sealant in brick or block movement joints
- Brittle, chalky sealant on external joints
Expansion joint sealing for businesses in Wyck
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle expansion joint sealing in Wyck
Brickwork and blockwork walls have vertical movement joints at intervals that most people only notice when the sealant has gone. Failed sealant here lets rain into the wall and can leave the joint full of debris. The old seal comes out, backing goes in and a sealant with the right movement class is applied. Most enquiries involve arrises breaking up along floor joints and debris jammed in movement joints, across precast concrete panel joints, podiums and floor movement joints and car park decks and ramps. Facilities teams, main contractors and managing agents in Wyck tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places such as Wyck, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
We stand by our work with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Where
- Wyck (GU34)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Travel to remote or island sites
- How much there is to seal
- How much existing material needs removing
- The size and state of each joint
The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a quote and we’ll explain how it’s made up.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- Whether an asbestos survey exists
- Your programme or deadline
- Rough lengths or quantities, or drawings if you have them
- A wide shot and a close-up of the area
Pricing a project or setting a maintenance budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, call the office on 01277 525 020 or email the details over.
Expansion joint sealing around Wyck: how the place shapes the job
Wyck is about 43 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day. Less than 3 miles from Wyck there are at least three named estates and business parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
For an estate such as Alton Community Hospital (3.2 miles west of Wyck), the joints in ramps, decks and long building elevations all need attention over time. In a school such as Binsted Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak. Estates like Kerridge Industrial Estate, 2.1 miles west of Wyck, combine warehouse slabs, yards and loading bays, all with joints under wheels.
Wyck is about 3 miles east of Alton, in Hampshire. We cover Wyck and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 723 places across Hampshire fall within our area, Wyck among them. We also cover Reading, around 21 miles from Wyck.
Work on movement joints is covered throughout GU34. We also cover East Worldham (1 mile south-west), Neatham (1 mile north-west), Holybourne (2 miles north-west), Upper Froyle (2 miles north) and Hartley Mauditt (2 miles south-west). Further afield, our area takes in Basingstoke (11 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north), Aldershot (10 miles north-east), Alton (3 miles west) and Petersfield (10 miles south).
Landmarks near Wyck
Locally, jobs take us to sites close to Eggar's School and the streets around them. The nearest railway station is Alton station, about 2.2 miles west of the centre. Other landmarks nearby include Alton Community Hospital (3.2 miles west) and Barley Pound (5 miles north-east). For a walk, there’s Deadwater Valley and Holybourne Hill.
Our process
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. For work around Wyck, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Warn occupants and staff about the work
- Tell us what induction or permit system the site runs
- Make sure the joints can be reached
Get a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or email the details over.
Read more
Different surfaces, different methods
Joints between different materials
Some mixed-material joints suit a hybrid sealant. The choice depends on the substrates and how much the joint moves.
Brickwork and blockwork joints
Long brick and block elevations have movement joints at intervals. They take a low-modulus sealant with a movement class to suit laid over backing rod at the correct depth.
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Note which joints were done, when, and with what
- Reopen bays and walkways only after the stated cure time
- Include every elevation and deck joint in periodic inspections
- Look over external and deck joints after a hard winter
Snow ploughs and scrapers catch on joint lines. Lifting the blade at each joint avoids tearing the bead.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it, which is bad news for the concrete and the people parking below. Resealing early limits the damage.
What sealant work can’t fix
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Changing the joint layout or spacing of a structure
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Crumbling edges that would give a new bead nothing sound to grip
If you’re not sure, just speak to us on 01277 525 020 or email a schedule or drawings and we’ll give you a straight answer before you book.
Surfaces we seal
- Brickwork movement joints
- Blockwork control joints
- Car park decks and ramps
- Podiums and floor movement joints
- Precast concrete panel joints
- Cladding panel joints
Commercial clients in Wyck
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, with each stage agreed with your site contact.
More services for Wyck
Wyck: questions and answers
Can you work at a site such as Kerridge Industrial Estate, by Wyck?
Yes. Our area takes in Wyck and its surroundings, with estates and business parks such as Kerridge Industrial Estate included. To start, just speak to us on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Is Wyck too small for you to travel to?
No. Places such as Wyck are covered as much as the big towns. We work across Greater London and the South East. We plan jobs in smaller places so return trips are kept to a minimum.
What’s the quickest route to a quote?
The quote form is the simplest route, though you can also phone 01277 525 020 or email the details over. Include photos or drawings if you have them.
Do you offer coloured sealant?
That depends on the product specified. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Is it fine to apply new sealant on top of old?
No, never. Overlaying old sealant is a frequent cause of early failure, so everything comes out first.
What site paperwork can you supply?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.