The Mastic Doctor team standing beside their branded vans outside an office building
Kent · England

Expansion and movement joint sealing in Wanshurst Green, Kent

Looking for expansion joint sealing in Wanshurst Green? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Joints where the bead has lost adhesion
  • Water dripping through deck or ramp joints
  • Water getting into the wall through a failed joint
1
Send details
Drawings, photos, a joint schedule or a site visit.
2
Get a quote
One fixed quote covering the agreed scope.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
12-month guarantee on our workmanship.
South East, London & Scotland
CHAS accredited
£5m PL insurance

Expansion joint sealing for Wanshurst Green sites

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Joints that move: notes for Wanshurst Green

Wanshurst Green sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, and winter de-icing salt on car parks and ramps works into any open joint. At about 35 miles from central London, Wanshurst Green is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.

Around Wanshurst Green, each joint gets a filler or sealant matched to what crosses it and how much it moves. Once a joint near Wanshurst Green opens up, grit and water get in and the edges start to break.

Wanshurst Green is about 6 miles south of Maidstone, in Kent. If you’re looking for expansion joint sealing in Wanshurst Green, we can help, as we do across Kent. We work across 931 places in Kent, from busy centres to rural villages. For work in that direction, see our London page (35 miles or so).

Commercial sites across TN12 are covered for movement joints. We also cover St Ann's Green (1 mile north), Milebush (1 mile north-west), Underling Green (1 mile north), Marden Thorn (1 mile south) and Cross-at-Hand (1 mile north-east). A short drive away, we cover Maidstone (6 miles north), Ashford (15 miles east), Sittingbourne (15 miles north-east), Royal Tunbridge Wells (11 miles west), Tonbridge (11 miles west) and Kings Hill (8 miles north-west).

Around Wanshurst Green

For rail, the closest station is Marden station, about 1.2 miles west. Nearby you’ll also find South East Romany Museum (0.5 miles south-west) and Sutton Valence Castle (4.1 miles north-east).

Map of Wanshurst Green © OpenStreetMap contributors

Expansion joint sealing for commercial buildings in Wanshurst Green

For movement joints in Wanshurst Green, photographs and approximate lengths are the best start. We’ll come and look where photos don’t show enough before issuing a fixed quote. You can also give us a call on 01277 525 020 or email a schedule or drawings to talk the joints through. We work on blockwork control joints, cladding panel joints and car park decks and ramps, and the failures we are asked to look at most are layers of sealant in a movement joint and chipped joint edges on forklift routes. One point of contact handles commercial sealant work in Wanshurst Green from the first photos to the final walk-round, whether it’s one building or several.

Smaller community and commercial buildings around Wanshurst Green have their own movement joints in walls and floors. They’re easily forgotten until water gets in or an edge breaks.

Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.

Place
Wanshurst Green (TN12)
Wider area
Kent
Cover
12 months on our workmanship
Quotes
Quoted before any work starts
Telephone
01277 525 020
Last updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

Doing it in-house

Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.

Commercial clients in Wanshurst Green

We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Wanshurst Green can form part of a wider programme.

Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first.

Questions we’re asked in Wanshurst Green

Will our site in Wanshurst Green have to close for joint sealing?

In the majority of cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. Tell us which hours and entrances we can use and we’ll plan from there.

What documents will you need to give us for a job in Wanshurst Green?

Whatever your site asks for, from RAMS to CSCS details, is confirmed when we quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.

How long will the new sealant last?

There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.

Why has the sealant in our expansion joints split?

It depends on how the sealant has let go: a split through the middle points to over-stretching, while peeling from one face points to preparation or primer. Broken edges are a third possibility.

What timescale should we allow for resealing expansion joints?

It normally takes anything from part of a day to a couple of weeks, depending on joint lengths, widths and access. We confirm the timescale with the quote along with the phasing plan.

Can you follow the specification on our project?

Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.

Do you need to see the site first?

Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.

How the quote is worked out

Sealant work doesn’t have a standard rate, because every site is different. What we look at:

  • Induction, permit and paperwork requirements
  • Access and working height
  • Quantities, in metres or numbers
  • The product specified

The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote and we’ll explain how it’s made up.

Before you send an enquiry

A good diagnosis starts with the right details. Tell us:

  • Clear photographs of the problem areas
  • Access details, including height
  • Asbestos survey details if the building is older
  • When you need the work done

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, call 01277 525 020 or email the details over.

Looking after the joints

Keep the joints in good shape with a few simple steps:

  • Leave barriers in place until fresh joint sealant has cured
  • Keep stones and debris out of open joint lines
  • Look over external and deck joints after a hard winter
  • Report split or peeling joint sealant early

Our workmanship on movement joints carries a 12-month guarantee. Record which product went into which joints in the building file.

External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors, well after the seal first opened. Catching it early keeps the water outside.

Diagnose, treat, sign off

Diagnose, treat, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Rural sites near Wanshurst Green may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.

  1. First the joints are inspected, widths measured and the type of failure noted.
  2. A fixed quote names the sealant we propose and its movement class.
  3. Where areas have to stay open, we agree a phased sequence before starting.
  4. We strip the old sealant or filler and prepare each face until it’s sound and dry.
  5. Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
  6. We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.

Preparing the site

  • Tell us which areas need to stay in use
  • Make sure the joints can be reached
  • Let us know about inductions and permits

Ask for a quote

For a fixed quote, call 01277 525 020 or email us. You can also send details through our quote form.

Get a quick quote

Related advice

What happens if it’s left?

Closing a car park for a reseal is rarely an option. Phased work by bay or zone lets the rest stay in use. Tell us what has to stay open and we will plan around it. Around Wanshurst Green, it’s better to renew all the failing joints at once, rather than one at a time. Photos of every joint help us quote for the whole job.

A quote for movement joints depends on how many there are, their condition and the access. Ask us for a fixed quote.

Why choose Mastic Doctor in Wanshurst Green

  • Colours confirmed for the specified product
  • A fixed quote before work starts
  • One phone line for London, the South East and Scotland
  • A Constructionline member, so easy to vet

Read what affects the cost or how we’re accredited.

Accreditations

Trusted. Accredited. Insured.