Expansion Joint Sealing in Tourner Bury
Expansion and movement joint sealing in walls, decks and floors in Tourner Bury. CHAS accredited and fully insured, with a 12-month guarantee.
- Spalled or broken joint edges in floors and decks
- Brittle, chalky sealant on external joints
- Car park joints leaking onto vehicles below
Expansion joint sealing across Tourner Bury
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing for commercial buildings in Tourner Bury
Our movement joint work takes in walls, panels, decks and floors: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. Every one calls for a sealant picked for its movement, exposure and traffic. If you’re dealing with water getting into the wall through a failed joint and torn sealant in brick or block movement joints, we can put it right. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Tourner Bury it comes down to the same thing: the right product in a properly prepared joint.
Jobs around smaller places like Tourner Bury are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we’ll take it from there.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Tourner Bury (PO11)
- Region
- Hampshire
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Looking after the joints
After handover, a little attention goes a long way:
- Keep product details with the building records for the next reseal
- Keep scrapers and ploughs from dragging across joint sealant
- Keep racking legs and heavy point loads off floor joints
- Clear dirt from joint lines during routine cleaning
Snow ploughs and scrapers catch on joint lines. Raising blades over joints where possible protects the seal.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers and the broken length grows with every pass. Keeping the filler or sealant sound protects the floor.
FAQs: Tourner Bury
Would you work within a site like St James Hospital?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is a smaller place like Tourner Bury outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
When can the area be used after sealing?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
What guarantee do you give on joint sealing?
It’s backed by our 12-month guarantee. If a joint we sealed fails inside the 12 months, let us know.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and we’ll price the work to it, flagging anything that needs clarifying.
What do you charge?
There isn’t a price list, as every site differs. Send photos or drawings and we’ll price it at a fixed figure.
Site staff or a sealant specialist?
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:
- Cracking or settlement that calls for an engineer’s assessment
- A joint that has to be widened or re-detailed before it can work
- Damaged metal nosings or cover plates over a joint
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we will tell you honestly before you book.
Surfaces we seal
- Car park decks and ramps
- Precast concrete panel joints
- Blockwork control joints
- Cladding panel joints
- Podiums and floor movement joints
- Brickwork movement joints
Warehouse floors and decks around Tourner Bury
With the shore within about 1 mile, Tourner Bury counts as a coastal location. Near the sea, external slabs, ramps and decks see salt air and driven rain as well as their usual loads, so a failed joint lets more in and the edges break up sooner. The 3 miles around Tourner Bury take in two named trading estates, business parks or retail parks. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Across sites such as Finchwood Farm Industrial Estate, 1.4 miles to the north of Tourner Bury, floor and movement joints can be sealed in phases so units keep working. Large sites such as St James Hospital (to the west of Tourner Bury) have car parks, service roads and long elevations with movement joints in brick and panels.
Tourner Bury is about 1 mile north-east of South Hayling, in Hampshire. If you’re looking for expansion joint sealing in Tourner Bury, we can help, as we do across Hampshire. Tourner Bury is one of 723 places in Hampshire on our list.
We take on movement joints across the PO11 postcode area, for business premises of every kind. We cover commercial and managed buildings on Tournerbury Lane, St Benedict Road and Beech Grove and the roads nearby. Close to Tourner Bury, our area also takes in South Hayling (1 mile south-west), West Town (1 mile west), Tye (2 miles north), Stoke (2 miles north) and North Hayling (2 miles north). Further afield, our area takes in Gosport (8 miles west), Havant (5 miles north), Fareham (11 miles west), Horndean (8 miles north), Waterlooville (7 miles north-west) and Petersfield (15 miles north).
Landmarks near Tourner Bury
Recent enquiries here include premises near The Hayling College and The Hayling College and the streets around them. Tourner Bury’s nearest station is Warblington station, roughly 4.1 miles north of the centre. A little further out are Eastney Beam Engine House (3.6 miles west) and St James Hospital (3.8 miles west). Green spaces nearby include Hayling Billy.
When to call us in Tourner Bury
The edges of the material can fail rather than the sealant. Weak or crumbling concrete, brick or render edges give the sealant nothing sound to grip so edge repair has to come before resealing.
Things that usually lead to an enquiry:
- Expansion joints split through the centre of the bead
- Water getting into the wall through a failed joint
- Hardened, cracked sealant on exposed facades
- Debris jammed in movement joints
Schools like Mengham Junior School often have long brick elevations with movement joints that age quietly.
Before you book anyone
- Do they follow the manufacturer’s priming guidance?
- Their pre-qualification and accreditations
- Can the work be phased to keep areas open?
- Will failed sealant be removed rather than covered?
Towns and villages near Tourner Bury
What else we do in Tourner Bury
Our process
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. For work around Tourner Bury, we aim to finish in one visit, so photographs and measurements up front really help. That way the right products come on the day.
- We look at the joints, their width and how they’ve failed.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- We control the depth with backing rod or, in shallow joints, bond-breaker tape.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
What we need from you
- Tell us your opening times and when work is allowed
- Share the asbestos register for older buildings
- Tell us what induction or permit system the site runs
Get a fixed quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Advice
Leave it or put it right?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. If the edges have broken up, we’ll tell you they need repairing first. For buildings around smaller places like Tourner Bury, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
What you get with us
- Public liability insurance in place
- CSCS-carded applicators
- Over 20 years of commercial sealing
- Workmanship guaranteed for 12 months
Read our cost guide or how we’re accredited.