Expansion Joint Sealing in Ridgeway
Expansion and movement joint sealing in walls, decks and floors in Ridgeway. CHAS accredited and fully insured, with a 12-month guarantee.
- Previous reseals laid over old sealant
- Joints where the bead has lost adhesion
- Movement joints with split or torn sealant
Expansion joint sealing for Ridgeway sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Ridgeway, done properly
Every structure moves a little, all the time: temperature, moisture, shrinkage and loading all make materials grow and shrink. Movement joints are where that movement is absorbed and the seal across each one keeps out water and grit. We seal and reseal movement joints in walls, panels, decks and floors. Most enquiries involve car park joints leaking onto vehicles below and weathered movement joint sealant that no longer flexes, across blockwork control joints, precast concrete panel joints and car park decks and ramps. Whoever orders the work in Ridgeway, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
For a site near Ridgeway, measurements and photos up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
Our workmanship is guaranteed for 12 months. If our installation lets you down in that time, we return and fix it.
- Place
- Ridgeway (TN25)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Surface by surface
Concrete and precast panel joints
Concrete edges can be weak or carry release agents that stop adhesion. Proper cleaning and primer where specified give a sound bond and check the edges for soundness as we go.
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. The joints need a low-modulus sealant with enough movement capability, and we’ll confirm the colours available for the specified product.
When it isn’t the sealant
Being straight saves everyone time. New sealant won’t cure:
- Cracking or settlement that calls for an engineer’s assessment
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- A joint that has to be widened or re-detailed before it can work
Not sure which it is? You can phone 01277 525 020 or email us and we will tell you honestly.
What we seal
- Cladding panel joints
- Brickwork movement joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Car park decks and ramps
- Blockwork control joints
Diagnose, treat, sign off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. If others near Ridgeway need work, visits can be combined. A fixed quote is given before anything starts.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Tell us your opening times and when work is allowed
- Point out parking and an unloading spot
- Clear stock, furniture or equipment away from the joints
Request a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or send details through our quote form.
Related advice
What sets the cost
To price the job, we consider:
- The size and state of each joint
- Specialist products, such as fire-rated or hygienic sealants
- Distance, for remote addresses
- Whether old sealant has to be cut out first
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote.
Sending details for a quote
A few photographs plus some basic facts will normally do. Please tell us:
- Drawings or a marked-up plan, if available
- The asbestos register, for older buildings
- The site address and postcode
- How the joints are reached, and at what height
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or email the details over if you’d rather talk the job through.
What happens if it’s left?
Spot repairs can be useful on a tight budget. But if the rest of the run is the same age and product, it’s normally not far behind, and a second visit means paying for access again. We can price a patch and a full reseal side by side. Around Ridgeway, it’s better to renew all the failing joints at once, rather than one at a time. Send photos of each area and we’ll quote for the lot.
A quote for movement joints depends on how many there are, their condition and the access. Call for a quote.
Why choose Mastic Doctor in Ridgeway
- Clear, fixed quotes
- Work to your specification and the manufacturer’s guidance
- Fully insured
- One phone line for London, the South East and Scotland
Take a look at how commercial sealant jobs are priced and our accreditations and insurance.
Ridgeway: questions and answers
Can you work at a site such as Evegate Business Park, by Ridgeway?
Yes. We cover Ridgeway and the area around it, including industrial estates, business parks and retail parks such as Evegate Business Park. Photos and a short description are enough for a first look.
Would you work within a site like William Harvey Hospital (Ashford)?
Yes, hospitals are one of the sectors we cover. We follow the site’s permits, sign-in and infection-control procedures in every area.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Can you seal car park deck joints?
Yes, we do. Tyre loads, grit and de-icing salts make these some of the hardest joints to keep sealed.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
General trades versus a specialist
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Also near Ridgeway
More services for Ridgeway
Warehouse floors and decks around Ridgeway
Less than 3 miles from Ridgeway there are at least three named estates and business parks. Sites like these are full of saw-cut floor joints, yard slabs and car park joints. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, while winter salting gets into any joint left open.
Parks like Evegate Business Park (0.7 miles south of Ridgeway) combine paved areas, car parks and building elevations, each with joints that move. At places like Mersham-le-Hatch Business Village, 0.7 miles to the west of Ridgeway, joints are sealed a section at a time so operations carry on. Schools like Smeeth Community Primary School often have long brick elevations with movement joints that age quietly.
Ridgeway is about 4 miles east of Ashford, in Kent. Commercial clients in Ridgeway use us for work on movement joints. Ridgeway is one of 931 places in Kent on our list. There’s a separate page for Brighton, about 51 miles away.
Work on movement joints is covered throughout TN25. Nearby places we also cover include Smeeth (1 mile east), Brabourne Lees (1 mile east), Lilyvale (1 mile east), Bircholt Forstal (1 mile north-east) and Mersham (1 mile west) for movement joints. Further afield, our area takes in Ashford (4 miles west), Canterbury (12 miles north-east), Dover (15 miles east), Folkestone (9 miles east), Faversham (14 miles north) and Hythe (6 miles south-east).
Near you in Ridgeway
For rail, the closest station is Westenhanger station, roughly 3.9 miles south-east. Well-known places in the area include William Harvey Hospital (2.4 miles north-west) and Lympne Castle (4.4 miles south-east). Not far away are Hatch Park.