Expansion and movement joint sealing in Pollhill, Kent
Planning work on a movement joint in Pollhill? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Car park joints leaking onto vehicles below
- Spalled or broken joint edges in floors and decks
- Debris jammed in movement joints
Expansion joint sealing near Pollhill
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our expansion joint sealing in Pollhill
Buildings and slabs are never completely still: they expand in the heat, shrink as they dry, and shift under load. Expansion and movement joints are built in so the structure can move without cracking, and the sealant in them keeps water and debris out. We seal and reseal movement joints in walls, panels, decks and floors on sites in Pollhill. Most enquiries involve expansion joints split through the centre of the bead and water getting into the wall through a failed joint, on podiums and floor movement joints, car park decks and ramps and precast concrete panel joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Pollhill it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Around smaller places such as Pollhill, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Pollhill (ME17)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Looking after the joints
For the best life from the joints:
- Brief car park operatives to protect joint lines during winter clearance
- Put movement joints on the planned maintenance inspection round
- Leave barriers in place until fresh joint sealant has cured
- Inspect exposed joints once the cold weather has passed
Debris does more harm to joint sealant than most people realise. Grit trodden or driven into the joint works at the surface until it tears, especially on car park decks and warehouse floors. A routine sweep is the simplest protection.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors, well after the seal first opened. Catching it early keeps the water outside.
Places near Pollhill
Also in Pollhill
When it isn’t the sealant
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Leaks coming from the membrane rather than the joint seal
- Changing the joint layout or spacing of a structure
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
If in doubt, speak to us on 01277 525 020 or email drawings and photos and we will say what we think.
Where we work in Pollhill
- Cladding panel joints
- Blockwork control joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
- Podiums and floor movement joints
When to call us in Pollhill
On trafficked joints, wheels and salts do the damage. Tyres and wheels press on the edges and the sealant, while grit and salts work into any gap. A sealant that isn’t trafficable won’t last there.
What tends to prompt an enquiry:
- Leaks through car park deck joints onto the level below
- Hardened, cracked sealant on exposed facades
- New sealant over old, now failing
- Sealant pulling off the joint face
In a school such as Harrietsham Church of England Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
What your quote should include
- Their approach to joint depth and backing
- Will CSCS-carded applicators be on site?
- Will RAMS and insurance details be available?
- Will failed sealant be removed rather than covered?
Questions we’re asked in Pollhill
Is Pollhill too small for you to travel to?
Not at all. Pollhill is within our area. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.
Is Roebuck Business Park, near Pollhill, within your area?
Yes. We cover Pollhill and the area around it, including industrial estates, business parks and retail parks such as Roebuck Business Park. Photos and a short description are enough for a first look.
When can you be on site?
Mention the site’s hours and access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we will confirm the curing time on the day.
Can you follow the specification on our project?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and we raise anything unclear before work begins.
What happens if it rains on the day?
Sealing onto a damp surface leads to adhesion failure. The work is simply moved to the next suitable day.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
Quoting for work in Pollhill
Your fixed quote is built from the real scope. It allows for:
- Site requirements such as inductions and permits
- Access and working height
- Removal of failed or old sealant
- Distance, for remote addresses
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What we need to price the job
There’s no need for a formal survey. A few details are enough to get going:
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
- The asbestos register, for older buildings
- Photos of the joints, close up and from further back
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to give us a call on 01277 525 020 or use the quote form with what you know.
Different surfaces, different methods
Podium joints
Podium joints often sit within a waterproofing system. We reseal the joint where sealant is the specified fix and flag it if the membrane looks like the source.
Brickwork and blockwork joints
Masonry faces are often porous, dusty or crumbly. Faces are prepared and primed wherever the sealant maker calls for it before the bead goes in.
Slabs, ramps and loading bays in Pollhill
Rainfall across the South East, Pollhill included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and gritting in cold spells finds its way into open joints. Central London is about 37 miles from Pollhill. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift.
Office parks like Roebuck Business Park, under half a mile to the east of Pollhill, have decks, ramps and clad elevations whose joints take movement every day. Hospitals like KIMS hospital (to the north-west of Pollhill) have multi-storey or surface car parks whose joints carry vehicles round the clock.
Pollhill is about 6 miles east of Maidstone, in Kent. Looking for expansion joint sealing in Pollhill? We can help. 931 places across Kent fall within our area, Pollhill among them. Sites around London have their own page, about 37 miles away.
We take on movement joints across the ME17 postcode area, whatever the building. Buildings on Horwood Way, Shrubwood Close and Parkfield Close are within our area for movement joints. Close to Pollhill, our area also takes in Harrietsham (1 mile east), Chegworth (1 mile north-west), Marley (1 mile east), Fairbourne Heath (1 mile south) and Broomfield (1 mile west). Bigger towns within reach include Maidstone (6 miles west), Ashford (11 miles south-east), Sittingbourne (8 miles north-east), Faversham (11 miles north-east), Minster (14 miles north-east) and Kings Hill (11 miles west).
Near you in Pollhill
Around Pollhill, our work takes us to commercial buildings near The Lenham School, Kiln Wood and The Roebuck Public House. The closest station to Pollhill is Harrietsham station, roughly 0.5 miles north-east of the centre. Well-known places in the area include Leeds Castle (1.6 miles north-west) and The Dog Collar Museum (1.5 miles west).
Our process
Site rules come first: sign-in, induction and whatever permit system the building uses. Once we’re cleared to begin, the joints are worked through in the order agreed with your site contact, and each area is checked before we leave it. For work around Pollhill, we aim to finish in one visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with photos, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Warn occupants and staff about the work
- Let us know about inductions and permits
- Arrange parking or a loading space
Request a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we will arrange a site visit if anything is unclear.