Expansion and movement joint sealing in Pembles Cross, Kent
Expansion joint sealing in Pembles Cross, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Expansion joints split through the centre of the bead
- Rain penetration at brick or block movement joints
- New sealant over old, now failing
Need expansion joint sealing in Pembles Cross?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Pembles Cross, done properly
Mastic Doctor has sealed movement joints since 2005 for contractors, facilities managers and owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. If you have sealant pulling off the joint face and expansion joints split through the centre of the bead, we can help. Facilities teams, main contractors and managing agents in Pembles Cross tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
In and around smaller places like Pembles Cross, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Pembles Cross (TN27)
- Wider area
- Kent
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Different surfaces, different methods
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. A sealant with the right movement class is chosen.
Concrete and precast panel joints
Precast and concrete panel joints move daily. The sealant needs the right movement capability and a controlled depth.
Warehouse floors and decks around Pembles Cross
Pembles Cross lies roughly 40 miles out from central London. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Pembles Cross sits in one of the drier corners of the country, the South East. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in.
Schools like Egerton Church of England Primary School often have long brick elevations with movement joints that age quietly. Around Pembles Cross, each joint gets a filler or sealant matched to what crosses it and how much it moves.
Pembles Cross is about 8 miles north-west of Ashford, in Kent. Across the TN27 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. 931 places across Kent fall within our area, including Pembles Cross. London is covered too, some 40 miles away.
Work on movement joints is covered throughout TN27, whatever the building. Nearby places we also cover include Potter's Forstal (1 mile south), Egerton Forstal (1 mile south), Newland Green (1 mile south-east), Egerton (1 mile east) and Mundy Bois (1 mile south-east) for movement joints. Nearby towns on our patch include Maidstone (9 miles north-west), Ashford (8 miles south-east), Sittingbourne (10 miles north), Faversham (12 miles north-east), Kings Hill (14 miles north-west) and Davington (12 miles north-east).
Landmarks near Pembles Cross
Pembles Cross’s nearest station is Lenham station, roughly 2.8 miles north. Well-known places in the area include Coldbridge Castle (0.5 miles north-west).
Also near Pembles Cross
More services for Pembles Cross
Work for main contractors and building owners
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Sites in Pembles Cross can sit alongside others in a wider programme.
CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Why it’s worth doing now in Pembles Cross
Sealing over a failed movement joint is a common shortcut. A bead over the old seal can’t bond or flex and soon lets go. Full removal and preparation is in every quote. Converted and older buildings near places like Pembles Cross tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
What you get with us
- Constructionline member
- Coloured sealants to suit the setting, where available
- CHAS accredited contractor
- Our applicators hold CSCS cards
Take a look at how commercial sealant jobs are priced and how we’re accredited.
Pembles Cross: questions and answers
Do we have to stop operations in Pembles Cross while the joints are sealed?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.
Is Pembles Cross too far out for you?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How do you choose the sealant?
If the job is specified, we follow the specification. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can weather delay the job?
Outside, yes. Sealant needs a dry joint and a temperature within the product’s range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.
How long before the joints can be used?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Can you seal joints in cold or wet weather?
A wet joint can’t be sealed properly, so external work waits for suitable conditions. The work is simply moved to the next suitable day.
How the quote is worked out
Each job is priced on its own details. The main factors are:
- Phasing around occupants
- Removal of failed or old sealant
- Which sealant the job calls for
- Distance, for remote addresses
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site rules also count.
Sending details for a quote
To price the job accurately, we need to understand the site. Send us:
- Specification clauses that apply
- Drawings or a marked-up plan, if available
- Clear photographs of the problem areas
- Access details, including height
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Our process
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and move on in phases so staff and visitors can carry on around us. For work around Pembles Cross, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We assess the joints on site or from photos, noting widths and how each has failed.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Explain the parking and delivery arrangements
- Send any specification or drawings in advance
Request a quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or send photos by email if you’d rather talk the job through.
Advice
When to bring in a specialist
Using site staff can make sense for a small touch-up, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.