Expansion joint sealing in Leybourne
Planning work on a movement joint in Leybourne? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Expansion joints filled with dirt and stones
- Leaks through car park deck joints onto the level below
- Chipped joint edges on forklift routes
Expansion joint sealing across Leybourne
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Questions about Leybourne
Will you take on work at estates like New Hythe Business Park, close to Leybourne?
Yes. Our area takes in Leybourne and its surroundings, with estates and business parks such as New Hythe Business Park included. To start, just give us a call on 01277 525 020 or use the quote form with the unit, the joints involved and your access times.
Is Leybourne too small for you to travel to?
Not at all. Leybourne is within our area. London and every South East county are within our area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, tell us and we’ll confirm them with the quote.
Do you use silicone or polyurethane in movement joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Is colour matching possible?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
About our expansion joint sealing in Leybourne
Few joints take as much punishment as those in a car park. Wheel loads, grit and de-icing salts attack the seal and the concrete either side; water dripping through to the deck below is often the first sign. A sealant suited to traffic and the expected movement goes in. If you are dealing with previous reseals laid over old sealant and car park joints leaking onto vehicles below, we can help, whatever the surface. Searching for sealant specialists in Leybourne? We’ve been sealing commercial buildings since 2005, with CSCS-carded applicators.
For a site near Leybourne, measurements and photos up front mean one trip where possible, with the right materials on hand. Note joint widths and the traffic that uses them, and we’ll take it from there.
We stand by our work with a 12-month guarantee. That covers our preparation and application.
- Location
- Leybourne (ME19, ME20)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Diagnose, treat, sign off
Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building around Leybourne, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Before we start on site
- Share the asbestos register for older buildings
- Let us know about inductions and permits
- Make sure the joints can be reached
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or phone 01277 525 020 or send photos by email to discuss it first.
Related advice
When to call us in Leybourne
Sealant peeling cleanly off one side is an adhesion failure. Poor preparation, a skipped primer, or sealant bonded to the back of the joint are typical reasons.
Most enquiries start with something like this:
- Sealant peeling off one face of the joint
- Joints packed with grit and debris
- Brittle, chalky sealant on external joints
- Rain penetration at brick or block movement joints
Hospitals like Maidstone Hospital, 3.1 miles south-east of Leybourne, have multi-storey or surface car parks whose joints carry vehicles round the clock.
Before you book anyone
- How they handle RAMS and site documents
- How the existing material will be dealt with
- Whether primer will be used where the manufacturer specifies it
- Is the sealant right for the movement and the substrate?
Should maintenance staff do it?
Some joints are best left to specialists: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we will confirm the paperwork you need with the quote.
Warehouse floors and decks around Leybourne
At least three named trading, business or retail sites lie within about 3 miles of Leybourne. Their warehouses, yards and car parks are exactly where joints take the most punishment. At about 26 miles from central London, Leybourne is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift.
On a site such as New Hythe Business Park, 1.4 miles to the north-east of Leybourne, the movement joints are in car park slabs, paving and building elevations. In a school such as Lunsford Primary School, movement joints in brick, block and hall floors tend to be forgotten until they leak.
Leybourne is about 5 miles north-west of Maidstone, in Kent. We cover commercial sites throughout Leybourne, whether it’s a single job or part of a planned programme. Leybourne is one of 931 places in Kent on our list. Our London page has more on work in that area, about 26 miles away.
Business premises anywhere in ME19 and ME20 are within our area. Among the streets we cover are London Road, Oxley Shaw Lane and Redbank, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Larkfield (1 mile east), Lunsford (1 mile north-east), New Hythe (1 mile north-east), Birling (1 mile north-west) and Snodland (2 miles north) for movement joints. A short drive away, we cover Maidstone (5 miles south-east), Sittingbourne (14 miles east), Dartford (13 miles north-west), Sevenoaks (10 miles west), Royal Tunbridge Wells (13 miles south-west) and Gravesend (9 miles north).
Local landmarks in Leybourne
In Leybourne, that means premises near The Malling School, Leybourne Lakes Country Park and The Malling School and the streets around them. For rail, the closest station is West Malling station, about 0.7 miles south-west. Nearby you’ll also find Leybourne Castle (less than half a mile north-west) and Coldrum Long Barrow (2.7 miles north-west). The countryside around Leybourne includes Burham Down and Blue Bell Hill.
When something else is needed
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Leaks coming from the membrane rather than the joint seal
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
Not sure which it is? You can give us a call on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
Where we work in Leybourne
- Cladding panel joints
- Blockwork control joints
- Car park decks and ramps
- Precast concrete panel joints
- Podiums and floor movement joints
- Brickwork movement joints
What the job involves on each surface
Cladding panel joints
We confirm what access is in place before pricing. Close-up photos help us judge the joints.
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement, with primer where specified.
What sets the cost
To price the job, we consider:
- Joint width, depth and condition
- Access and working height
- Quantities, in metres or numbers
- Induction, permit and paperwork requirements
Pricing movement joints depends on how many there are, their condition and the access. Ask us for a fixed quote.
Before you send an enquiry
A good diagnosis starts with the right details. Let us know:
- Where the site is, with the postcode
- Drawings or a marked-up plan, if available
- The type of building and who uses it
- A wide shot and a close-up of the area
To get a fixed quote, call 01277 525 020 or send details through our quote form. You can also send details through our quote form.