Expansion joint sealing in Hodsoll Street
Expansion and movement joint sealing in walls, decks and floors in Hodsoll Street. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Layers of sealant in a movement joint
- Torn sealant in brick or block movement joints
- Damp inside where a wall movement joint has failed
Expansion joint sealing for businesses in Hodsoll Street
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building around Hodsoll Street, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Preparing the site
- Tell us which areas need to stay in use
- Explain the parking and delivery arrangements
- Share your working hours and any access restrictions
Get a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send details through our quote form.
Advice
Expansion joint sealing in Hodsoll Street, done properly
Width, depth and product all have to work together. Joint width must suit the movement and the movement class of the sealant while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises and the bead bonds to the sides, never the back. The enquiries we see most involve layers of sealant in a movement joint and brittle, chalky sealant on external joints, on brickwork movement joints, precast concrete panel joints and car park decks and ramps. A single leaking joint is often how a building in Hodsoll Street first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Halls, schools and small commercial buildings near places like Hodsoll Street have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
Our 12-month guarantee is about workmanship, not wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Where
- Hodsoll Street (TN15)
- Region
- Kent
- Cover
- 12 months on every job
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Different surfaces, different methods
Car park decks and ramps
Water coming through deck joints is the usual first sign. The old seal comes out, the edges are prepared and the joint resealed.
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. The joints need a low-modulus sealant with enough movement capability, and we’ll confirm the colours available for the specified product.
Joints that move: notes for Hodsoll Street
Rainfall across the South East, Hodsoll Street included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in. Hodsoll Street lies roughly 21 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.
If you manage units on an estate such as Bowes Industrial Centre, 1.8 miles to the north-east of Hodsoll Street, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch. Schools like Culverstone Green Primary School often have long brick elevations with movement joints that age quietly.
Hodsoll Street is about 6 miles south of Northfleet, in Kent. If you are looking for expansion joint sealing in Hodsoll Street, we can help. Hodsoll Street is one of 931 places we cover in Kent. There’s a separate page for London, roughly 21 miles from Hodsoll Street.
Work on movement joints is covered throughout TN15, whatever the building. We cover commercial and managed buildings on Haven Hill and Hodsoll Street and the roads nearby. If your building is just outside Hodsoll Street, we cover Ridley (1 mile north), Fairseat (1 mile south), New Street (1 mile north-east), Culverstone Green (1 mile east) and South Street (1 mile north-east). Further afield, our area takes in Maidstone (10 miles south-east), Dartford (8 miles north-west), Sevenoaks (7 miles south-west), Royal Tunbridge Wells (14 miles south), Gravesend (7 miles north) and Tonbridge (10 miles south).
Around Hodsoll Street
Locally, jobs take us to sites close to Trosley Country Park and Meopham School and the streets around them. The closest station to Hodsoll Street is Meopham station, roughly 3.4 miles north-east. A little further out are Ightham Court (3.7 miles south-west) and Coldrum Long Barrow (2.4 miles south-east).
What affects the price in Hodsoll Street
Each job is priced on its own details. The things that drive the figure:
- Removal of failed or old sealant
- Joint width, depth and condition
- How much there is to seal
- Any access equipment needed
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Details that help us quote
However big the job, the same details help:
- Anything awkward about access or site hours
- The asbestos register, for older buildings
- Approximate linear metres or a joint schedule
- When you need the work done
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to phone 01277 525 020 or send details through our quote form.
What sealant work can’t fix
We check first that sealant really is the fix. It won’t put right:
- Crumbling edges that would give a new bead nothing sound to grip
- Waterproofing layers buried beneath the sealant
- Cracking or settlement that calls for an engineer’s assessment
If in doubt, call the office on 01277 525 020 or email drawings and photos and we’ll say what we think.
What we seal
- Car park decks and ramps
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
- Precast concrete panel joints
- Brickwork movement joints
What we’re called out for in Hodsoll Street
Car park decks and floors face loads that walls never see. Wheel loads stress the sealant and the arrises, while grit and salts work into any gap. A sealant that isn’t trafficable won’t last there.
Clients normally get in touch after noticing one or more of the following:
- Previous reseals laid over old sealant
- Torn sealant in brick or block movement joints
- Sealant pulling off the joint face
- Chipped joint edges on forklift routes
At places like Heaver Farm Trading Estate, 1.9 miles to the north-west of Hodsoll Street, joints are sealed a section at a time so operations carry on.
Questions to ask before you book
- Do they follow the manufacturer’s priming guidance?
- Is the sealant right for the movement and the substrate?
- Their plan for phasing and protecting the area
- Are they CHAS accredited or on Constructionline?
Maintenance after handover
After handover, a little attention goes a long way:
- Keep stones and debris out of open joint lines
- Leave barriers in place until fresh joint sealant has cured
- Avoid parking heavy plant or pallets on joint lines
- Act on the first tear or lifting edge rather than waiting
Movement joints belong on the planned maintenance inspection list. A periodic look picks up tears and lifting before water gets in. Should you spot a problem, you can call 01277 525 020 or send photos by email and send a picture.
Floor joints with failed fillers break up quickly under wheels. Damaged edges make the floor rough and wear wheels faster and the broken length grows with every pass. Sealing early protects the edges.
Nearby places to Hodsoll Street
Also in Hodsoll Street
FAQs: Hodsoll Street
Can you work at a site such as Bowes Industrial Centre, by Hodsoll Street?
Yes, sites like Bowes Industrial Centre are within our area, along with the rest of Hodsoll Street. Photos and a short description are enough for a first look.
Is Hodsoll Street off your patch?
No. Places such as Hodsoll Street are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
What causes movement joint sealant to fail?
Typically the joint is moving more than the sealant can take. We review the joint design as well as the sealant before pricing, rather than replacing like for like.
What site paperwork can you supply?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
Can you quote from photographs?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we will arrange a visit.
How do we ask for a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
What happens if old sealant might contain asbestos?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.