Great Holland expansion joint sealing
We carry out expansion and movement joint sealing in walls, decks and floors in Great Holland and the surrounding area. Send photographs or drawings for a fixed quote.
- Arrises breaking up along floor joints
- Joints packed with grit and debris
- Water getting into the wall through a failed joint
Expansion joint sealing across Great Holland
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What the job involves on each surface
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. We reseal the joint where sealant is the specified fix and flag it if the membrane looks like the source.
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces, with primer where specified.
Expansion joint sealing for commercial buildings in Great Holland
Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels so the product has to suit both the traffic and the movement. If the arrises are already broken, we’ll say so before sealing. If you have leaks through car park deck joints onto the level below and rain penetration at brick or block movement joints, we can put it right, on precast concrete panel joints, blockwork control joints and cladding panel joints alike. Most enquiries from Great Holland start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Jobs around smaller places like Great Holland are planned so the whole job is done in one visit. Note joint widths and the traffic that uses them, and we will take it from there.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we’re clear about what is covered before work starts.
- Place
- Great Holland (CO13)
- Region
- Essex
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
FAQs: Great Holland
Do you cover business parks and estates near Great Holland, such as Lodge Farm Business Park?
Yes. Our area takes in Great Holland and its surroundings, with estates and business parks such as Lodge Farm Business Park included. To start, just give us a call on 01277 525 020 or send photos by email with the unit, the joints involved and your access times.
Our building in Great Holland is near the coast: does that change the sealant?
It can. Coastal exposure works external joints harder than inland weather. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Who decides which product is used?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Do you have public liability insurance?
Yes. We’re fully insured, and the certificate can go with your quote.
How long do sealant joints last?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Sealant joints are maintenance items, so inspect them regularly.
What exactly is a movement joint?
Put simply, it’s a planned break in a wall, slab or deck so the materials can move. Expansion joint is a name often used for the same thing and both need a flexible seal.
Is movement joint sealing guaranteed?
The workmanship is guaranteed for 12 months from sign-off and we hold public liability insurance. Regular sweeping and inspection help the joints last.
How a job runs
Tell us your site hours and access windows and we’ll plan around them. While we’re working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Jobs in and around smaller places like Great Holland are typically planned as a single visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- First, the joints are inspected for width, movement and the type of failure.
- A fixed quote follows, naming the sealant and its movement class.
- We strip out the old seal and prepare the faces.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Each joint is inspected and handed over with our 12-month guarantee.
Getting the site ready
- For older buildings, check the asbestos register before work
- Send any specification or drawings in advance
- Arrange parking or a loading space
Get a fixed quote
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To start the process, phone 01277 525 020 or email drawings and photos.
Read more
What happens if it’s left?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. If the edges have broken up, we’ll tell you they need repairing first. For buildings around smaller places like Great Holland, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- Sealing commercial buildings since 2005
- Clear, fixed quotes
- Joints cleaned back to sound surfaces
- Constructionline member for supplier checks
See our cost guide and our accreditations.
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Put movement joints on the planned maintenance inspection round
- Inspect exposed joints once the cold weather has passed
- Raise snow-clearing blades over deck joints where possible
- Record the sealant used and the date in the O&M file
Add every elevation, deck and floor joint to your inspection round. Early splits and edges starting to lift show up on a routine check and long before edges start to break. Should you spot a problem, you can speak to us on 01277 525 020 or email a schedule or drawings and send a picture.
An open joint fills with grit, and a joint full of grit can’t close. The arrises crack and break away under the load, turning a sealant job into a repair job. A sound seal keeps the joint working.
Places near Great Holland
What else we do in Great Holland
Do you need expansion joint sealing in Great Holland?
Some joints were never sealed with the right product. Products not classed for the movement fail early. BS EN ISO 11600 classifies building sealants by movement capability, and specifications often refer to it.
Common reasons buildings call us in:
- Sealant pulling off the joint face
- Water getting into the wall through a failed joint
- Expansion joints filled with dirt and stones
- Water dripping through deck or ramp joints
Office parks like Lodge Farm Business Park (0.8 miles south of Great Holland) have decks, ramps and clad elevations whose joints take movement every day.
Comparing quotes
- How the existing material will be dealt with
- What site paperwork they can supply
- Which product they’ll use, and why it suits the joint
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
Floors, slabs and movement joints in Great Holland
The sea is no more than about 2 miles from Great Holland. External movement joints in car parks, ramps and yards near the coast take salt and wind-driven rain on top of traffic, so a failed joint lets more in and the edges break up sooner. At least three named trading, business or retail sites lie within about 3 miles of Great Holland. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
Across sites such as Telford Business Park, 1.7 miles south-west of Great Holland, floor and movement joints can be sealed in phases so units keep working. Schools such as Kirby Primary Academy have movement joints in their walls and floors that are easy to overlook.
Great Holland is about 3 miles north-east of Clacton-on-Sea, in Essex. We cover commercial sites throughout Great Holland, for single jobs and planned programmes alike. Our Essex coverage takes in 644 places, from busy centres to rural villages. Sites around London have their own page, about 61 miles away.
We take on movement joints across the CO13 postcode area, whatever the building. For a building on Rosery Mews, Orchard Drive and Laxton Grove or nearby, send details and we will quote for movement joints. Sites close to Great Holland are covered too, including Kirby Cross (1 mile north-east), Kirby-le-Soken (1 mile north-east), Thorpe Cross (2 miles north-west), Lane End (2 miles north) and Frinton-on-Sea (2 miles east). Nearby towns on our patch include Colchester (14 miles west), Clacton-on-Sea (3 miles south-west), Harwich (7 miles north), Camulodunum (15 miles west), Greenstead (12 miles west) and Wivenhoe (11 miles west).
Around Great Holland
We work on buildings around Tendring Technology College, The Ship Inn and Greensward and the streets around them. The closest station to Great Holland is Kirby Cross station, roughly 0.6 miles north. The countryside around Great Holland includes Great Holland Pits.
When to bring in a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.