Expansion and movement joint sealing in Folly Town, Kent
Planning work on a movement joint in Folly Town? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Debris jammed in movement joints
- Spalled or broken joint edges in floors and decks
- Movement joints with split or torn sealant
Expansion joint sealing across Folly Town
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Folly Town
Brickwork and blockwork walls have vertical movement joints at intervals, and they’re easy to miss until the sealant fails. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied with primer where the maker calls for it. If you are dealing with sealant peeling off one face of the joint and spalled or broken joint edges in floors and decks, we can help, whatever the surface. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Folly Town is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
In and around smaller places like Folly Town, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Whether it’s a farm store turned workshop or a storage unit, the joints need a product that suits the traffic.
Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.
- Where
- Folly Town (TN25)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Commercial clients in Folly Town
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, which keeps the paperwork simple.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Towns and villages near Folly Town
Also in Folly Town
Honest limits
Being straight saves everyone time. New sealant won’t cure:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
Not sure which it is? You can call 01277 525 020 or send photos by email and we’ll tell you honestly before you book.
Surfaces we seal
- Brickwork movement joints
- Cladding panel joints
- Precast concrete panel joints
- Blockwork control joints
- Car park decks and ramps
- Podiums and floor movement joints
Your questions answered
Can you work on a hospital site such as William Harvey Hospital?
Yes. Healthcare sites are among the places we work. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Will our site in Folly Town have to close for joint sealing?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
How long does movement joint sealing take?
Allow a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints. We confirm the timescale with the quote.
Do you work in Folly Town?
Yes. Folly Town is in our area, within our coverage of Greater London, South East England and Scotland. For a quote, call 01277 525 020 or email the details over.
Are expansion joints and movement joints the same thing?
Put simply, it’s a planned break in a wall, slab or deck so the materials can move. Many people call it an expansion joint, and either way it needs a sound seal.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, so we’ll confirm the curing time on the day.
Which product is best for expansion joints?
Whatever suits the joint and the specification. The quote states the sealant and its movement class, so you know what’s going in.
How a job runs
When we get to site, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work normally takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. If others near Folly Town need work, visits can be combined. A fixed quote is given before anything starts.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Areas reopen once cured, and the work carries our 12-month guarantee.
What we need from you
- Let building users know which areas are affected
- Point out any areas we must not close
- Send your site hours and access windows
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call the office on 01277 525 020 or email us.
Read more
Why deal with it now?
Spot repairs can be useful on a tight budget. But if the rest of the run is the same age and product, it’s usually not far behind. Where it helps, we quote both options. Older rural buildings around Folly Town move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
The specified product makes a difference, as does the preparation each joint needs. Access, phasing and site rules also count.
What you get with us
- Coloured sealants to suit the setting, where available
- Colour agreed before work starts
- CHAS accredited
- A fixed quote before work starts
Read how commercial sealant jobs are priced and our accreditations.
Signs you need expansion joint sealing in Folly Town
Sometimes the sealant holds but the substrate breaks away. Weak or crumbling concrete, brick or render edges give the sealant nothing sound to grip.
Common reasons buildings call us in:
- Joints where the bead has lost adhesion
- Layers of sealant in a movement joint
- Leaks through car park deck joints onto the level below
- Expansion joints filled with dirt and stones
Hospitals like William Harvey Hospital, 3.6 miles to the south-west of Folly Town, have multi-storey or surface car parks whose joints carry vehicles round the clock.
What to look for in a quote
- Whether primer will be used where the manufacturer specifies it
- Their public liability cover
- Whether their applicators hold CSCS cards
- Health and safety accreditation such as CHAS
Different surfaces, different methods
Joints between different materials
Different materials meeting at a joint rarely move in step. The product must bond to both substrates and cope with the movement.
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. A sealant with the right movement class is chosen in a colour confirmed for that product.
Warehouse floors and decks around Folly Town
Folly Town is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and where de-icing salt is spread in winter, open joints let it in. Folly Town lies roughly 52 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors.
For a school such as Wye School, playground and building joints can be done in the holidays.
Folly Town is about 5 miles east of Ashford, in Kent. Businesses, contractors and managing agents in Folly Town can call on us for movement joints, as part of our coverage of Kent. Across Kent, 931 places are covered, including Folly Town. For work in that direction, see our London page (52 miles or so).
Commercial sites across TN25 are covered. If your building is just outside Folly Town, we cover Hastingleigh (1 mile east), Hassell Street (1 mile north), Brook (1 mile west), Brabourne (2 miles south) and Wye (2 miles north-west). A short drive away, we cover Ashford (5 miles west), Canterbury (9 miles north-east), Dover (14 miles east), Folkestone (10 miles south-east), Whitstable (13 miles north) and Faversham (11 miles north-west).
Near you in Folly Town
Locally, jobs take us to sites close to The Bowl Inn. Folly Town’s nearest station is Wye station, roughly 2.7 miles north-west of the centre. Other landmarks nearby include William Harvey Hospital (3.6 miles south-west). For a walk, there’s Hatch Park.