Expansion Joint Sealing in Ewhurst
Expansion and movement joint sealing in walls, decks and floors across Ewhurst, by CSCS-carded applicators. CHAS accredited and fully insured.
- Expansion joints split through the centre of the bead
- Arrises breaking up along floor joints
- Debris jammed in movement joints
Expansion joint sealing for businesses in Ewhurst
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
General trades versus a specialist
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
How we handle expansion joint sealing in Ewhurst
Mastic Doctor has sealed movement joints since 2005 for contractors, facilities managers and owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. We work on brickwork movement joints, cladding panel joints and precast concrete panel joints, and the usual reasons a site gets in touch are hardened, cracked sealant on exposed facades and sealant pulling off the joint face. Most enquiries from Ewhurst start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Jobs around smaller places like Ewhurst are planned so the whole job is done in one visit, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
Our workmanship is guaranteed for 12 months, in Ewhurst as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Ewhurst (GU6)
- Region
- Surrey
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Changing the joint layout or spacing of a structure
- Proprietary pre-formed expansion joint systems
Not sure which it is? You can call 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
Joints and surfaces we work on
- Podiums and floor movement joints
- Car park decks and ramps
- Blockwork control joints
- Cladding panel joints
- Precast concrete panel joints
- Brickwork movement joints
Why it’s worth doing now in Ewhurst
A like-for-like reseal of a joint that keeps splitting rarely lasts. A higher movement class, or a design change by the engineer, may be needed and we will tell you honestly. For buildings around smaller places like Ewhurst, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why us?
- Products installed to the manufacturer’s instructions
- Failed material removed, not covered up
- Sealing commercial buildings since 2005
- Coloured sealants to suit the setting, where available
Cost factors for movement joints
Before we quote, we look at:
- The total length or number of joints
- Backing rod, priming and other preparation
- Distance, for remote addresses
- How much existing material needs removing
Cost follows what’s involved: stripping out, preparation, sealing, access and phasing. Call for a fixed quote and we’ll explain how it’s made up.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- The product your specification calls for
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
- The asbestos register, for older buildings
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
More services for Ewhurst
FAQs: Ewhurst
Will our site in Ewhurst have to close for joint sealing?
In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. The phasing plan comes with the quote.
Do you cover business parks and estates near Ewhurst, such as Manfield Park Industrial Estate?
Yes. Our area takes in Ewhurst and its surroundings, with estates and business parks such as Manfield Park Industrial Estate included. Send details of the unit and the work through our quote form for a quick quote.
How long will the joint resealing take?
The metres of joint, the access and the amount of removal decide it. Typically it takes a short visit for a handful of joints, or several days or more for a car park deck or long runs of facade joints.
When is resealing likely to be due?
There’s no fixed lifespan: movement, exposure, cleaning, traffic and the product all play a part. Treat them as maintenance items and inspect them regularly.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
What sealant do you use in movement joints?
The specification comes first, then the joint’s movement and exposure. We name the proposed product in the quote.
Is colour matching possible?
That depends on the product. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
What we’re called out for in Ewhurst
Sometimes the sealant holds but the substrate breaks away. Weak or crumbling concrete, brick or render edges give the sealant nothing sound to grip.
These are often picked up first by site or facilities staff:
- Debris jammed in movement joints
- Brittle, chalky sealant on external joints
- Joints where the bead has lost adhesion
- Torn sealant in brick or block movement joints
Across sites such as Littlemead Industrial Estate, 2.9 miles to the west of Ewhurst, floor and movement joints can be sealed in phases so units keep working.
Comparing quotes
- Proof of insurance
- Can the work be phased to keep areas open?
- Are they CHAS accredited or on Constructionline?
- Who will actually carry out the work
From enquiry to sign-off
We bring the products specified for the job, along with primers and backing rod. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Smaller jobs around Ewhurst can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- We compare each joint’s width with the movement and the sealant’s capability, and flag anything that needs an engineer.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Warn occupants and staff about the work
- Move anything stored against the joints
- Tell us your opening times and when work is allowed
Request a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call 01277 525 020 or email us to discuss it first.
Related advice
Floors, slabs and movement joints in Ewhurst
The 3 miles around Ewhurst take in two named trading estates, business parks or retail parks. That puts plenty of warehouse floors, service yards and car parks close by, all with joints under traffic. The South East is one of the drier parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, and where de-icing salt is spread in winter, open joints let it in.
Schools like Ewhurst CofE Aided Infant School often have long brick elevations with movement joints that age quietly. On industrial estates such as Manfield Park Industrial Estate, 2.8 miles west of Ewhurst, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Ewhurst is about 7 miles south-west of Dorking, in Surrey. Anywhere in GU6, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Ewhurst is one of 379 places we cover in Surrey for movement joints. For work in that direction, see our Brighton page (26 miles or so).
If you need expansion joint sealing in GU6, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Among the streets we cover are The Street, Mount Close and Broomers Lane. With the B2127 nearby, Ewhurst is easy to get to with materials and equipment. Just outside Ewhurst, we also work in Ewhurst Green (1 mile south-east), Mayes Green (2 miles east), Cranleigh (2 miles west), Walliswood (2 miles south-east) and Pitland Street (3 miles north-east). Further afield, our area takes in Guildford (9 miles north-west), Woking (13 miles north-west), Epsom (15 miles north-east), Horley (12 miles east), Redhill (13 miles north-east) and Reigate (12 miles north-east).
Landmarks near Ewhurst
Locally, jobs take us to sites close to Sayer's Croft LNR, Bulls Head pub and Hurtwood House. For rail, the closest station is Ockley station, about 4.5 miles east. A little further out are Abinger Castle (3.8 miles north) and Mesolithic Museum (3.8 miles north). The countryside around Ewhurst includes Vann Lake and Leith Hill.