Expansion joint sealing in Doddington
Work needed on a movement joint in Doddington? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Torn sealant in brick or block movement joints
- Leaks through car park deck joints onto the level below
- Expansion joints filled with dirt and stones
Expansion joint sealing for businesses in Doddington
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. Then we strip out anything that has failed, prepare every joint and seal it. For work around Doddington, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We assess the joints on site or from photographs, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.
Preparing the site
- Tell us what induction or permit system the site runs
- Move anything stored against the joints
- Share your working hours and any access restrictions
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or use the quote form if you’d rather talk the job through.
Read more
How we handle expansion joint sealing in Doddington
Long runs of brick or block have movement joints built in that most people only notice when the sealant has gone. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied. Site teams most often ask us about arrises breaking up along floor joints and debris jammed in movement joints, on brickwork movement joints, podiums and floor movement joints and cladding panel joints. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Doddington, that means joint design, primers and backing rod as standard.
Smaller community and commercial buildings around Doddington have their own movement joints in walls and floors. They tend to be overlooked until something leaks or cracks.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Doddington (ME9)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quotes
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Aftercare for building managers
Problems stay small when the joints are checked regularly. Specifically:
- Plan racking layouts so feet don’t land on a joint
- Include every elevation and deck joint in periodic inspections
- Act on the first tear or lifting edge rather than waiting
- Reopen bays and walkways only after the stated cure time
Our workmanship on movement joints carries a 12-month guarantee. Record which product went into which joints in the building file, so the next reseal starts with the facts.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors. Catching it early keeps the water outside.
Places near Doddington
Other services in Doddington
Common problems we fix in Doddington
Some joints were never sealed with the right product. A stiff or general-purpose sealant across a joint with large movement won’t cope. BS EN ISO 11600 classifies building sealants by movement capability.
What tends to prompt an enquiry:
- Layers of sealant in a movement joint
- Movement joints with split or torn sealant
- Sealant pulling off the joint face
- Spalled or broken joint edges in floors and decks
Office parks like Kent Science Park (to the north-west of Doddington) have decks, ramps and clad elevations whose joints take movement every day.
What to look for in a quote
- Will RAMS and insurance details be available?
- Whether old or failed sealant will be cut out, not overlaid
- Health and safety accreditation such as CHAS
- Is the sealant right for the movement and the substrate?
What affects the price in Doddington
Your fixed quote is built from the real scope. It takes account of:
- Access and working height
- Quantities, in metres or numbers
- Which sealant the job calls for
- Whether old sealant has to be cut out first
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
What we need to price the job
The more we know, the firmer the quote. When you get in touch, include:
- Any specification or named product
- The postcode of the building
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Where floor joints take the most wear near Doddington
Doddington sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, and gritting in cold spells finds its way into open joints. At about 40 miles from central London, Doddington is within reach of the capital. Warehousing clusters around the motorways that ring and radiate from London; their floors carry heavy traffic every shift.
For estates staff at a university like Canterbury Christ Church University (4.1 miles west of Doddington), building and paving joints are part of the planned maintenance list.
Doddington is about 5 miles south of Sittingbourne, in Kent. Businesses, contractors and managing agents in Doddington use us for work on movement joints, as part of our coverage of Kent. Doddington is one of 931 places we cover in Kent. There’s a separate page for London, roughly 40 miles from Doddington.
We take on movement joints across the ME9 postcode area, whatever the building. We cover commercial and managed buildings on The Street, Old Lenham Road and Northdown and the roads nearby. If your building is just outside Doddington, we cover Wichling (1 mile south-west), Bluetown (1 mile north-west), Newnham (1 mile east), Hollybushes (1 mile west) and Payden Street (2 miles south-west). Nearby towns on our patch include Maidstone (11 miles west), Ashford (11 miles south-east), Canterbury (13 miles east), Sittingbourne (5 miles north), Whitstable (12 miles north-east) and Faversham (6 miles north-east).
Around Doddington
Recent enquiries here include premises near The Chequers Inn and Doddington Place Gardens and the streets around them. The closest station to Doddington is Teynham station, roughly 4 miles north-east. A little further out are Newnham Castle (1.4 miles east).
Your questions answered
Will our site in Doddington have to close for joint sealing?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
Is Doddington too far out for you?
Not at all. Doddington is within our area. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can the building stay open while you work?
Normally, yes. We phase the work so most of the building stays in use.
Why do our movement joints keep failing?
The way it has failed normally tells us why: a split through the middle points to over-stretching, while peeling from one face points to preparation or primer. Broken edges are a third possibility.
What hours do you work?
We are in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
When to bring in a specialist
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Different surfaces, different methods
Cladding panel joints
We confirm what access is in place before pricing. Photos taken near the joints help us price accurately, or we visit if they don’t show enough.
Car park decks and ramps
Deck and ramp joints take tyre loads, grit and de-icing salts. We use a sealant made for wheel loads and the expected movement with bays done in phases so the car park keeps running.