Bicknor expansion joint sealing
Looking for expansion joint sealing in Bicknor? It’s simple: send details, get a quote, we seal, guaranteed.
- Sealant peeling off one face of the joint
- Arrises breaking up along floor joints
- Water dripping through deck or ramp joints
Need expansion joint sealing in Bicknor?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our expansion joint sealing in Bicknor
Every structure moves a little, all the time: they expand in the heat, shrink as they dry, and shift under load. Expansion and movement joints are built in so the structure can move without cracking. Mastic Doctor reseals movement joints in brickwork, blockwork, concrete, cladding and floors for buildings in Bicknor. We work on cladding panel joints, precast concrete panel joints and car park decks and ramps, and what we’re called in for most is car park joints leaking onto vehicles below and joints packed with grit and debris. Looking for mastic applicators who cover Bicknor? Mastic Doctor has worked for contractors, FMs and building owners since 2005.
In and around smaller places like Bicknor, the concrete floors we see are often in converted farm buildings, small workshops and storage units. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Every job we finish is backed by a 12-month workmanship guarantee, in Bicknor as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Bicknor (ME9)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Commercial clients in Bicknor
Building owners and managing agents use us on everything from one building to a spread of sites. Several sites can go on one quote, so there’s one set of paperwork to deal with.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules, and our applicators hold CSCS cards.
Quoting for work in Bicknor
These are the things that shape the price:
- Whether old sealant has to be cut out first
- Site requirements such as inductions and permits
- Access and working height
- Backing rod, priming and other preparation
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a fixed quote when you’re ready.
What to include in your enquiry
Good information means a firmer quote. When you get in touch, include:
- Drawings or a marked-up plan, if available
- Your programme or deadline
- Whether an asbestos survey exists
- Where the site is, with the postcode
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Nearby places to Bicknor
Also in Bicknor
When to bring in a specialist
Redoing a failed joint usually costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
What happens if it’s left?
Resealing is typically the answer, not replacing the element. Where the edges are sound, cutting out and resealing is enough. If the edges have broken up, we will tell you they need repairing first. For buildings around smaller places like Bicknor, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Access often affects the price as much as the sealing: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.
Why choose Mastic Doctor in Bicknor
- Joints cleaned back to sound surfaces
- Over 20 years of commercial sealing
- Constructionline member for supplier checks
- One contact handling all your sites
Take a look at how commercial sealant jobs are priced or our accreditations.
FAQs: Bicknor
Is Bicknor too small for you to travel to?
No. Places such as Bicknor are covered as much as the big towns. Our area covers London and the South East counties. Where we can, we group nearby jobs to make the most of each trip.
Would you work within a site like KIMS hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. Before we disturb old sealant in an older building, we ask to see the asbestos register or survey, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Do the joint edges need to be sound before sealing?
Sealant needs sound faces to bond to, so broken or crumbling edges have to be repaired first. Where it’s visible beforehand, we will say so when we quote.
Can the sealant be colour-matched?
Often, yes. Sealants are made in a wide range of standard colours, and matching to RAL references or nearby finishes is commonly requested. We confirm what’s available for the specified product when we quote.
What sealant do you use in movement joints?
Whatever suits the joint and the specification. The quote states the sealant and its movement class so there are no surprises.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Joints that move: notes for Bicknor
Rainfall across the South East, Bicknor included, is lower than in many parts of the UK. Outside joints in yards and car parks still have to be dry before sealing, while winter salting gets into any joint left open. Central London is about 36 miles from Bicknor. The roads out of London are lined with trade parks and distribution sheds.
For estates staff at a university like Canterbury Christ Church University, 2 miles south of Bicknor, building and paving joints are part of the planned maintenance list. On a site such as Kent Science Park (2.7 miles north-east of Bicknor), the movement joints are in car park slabs, paving and building elevations. For an estate such as KIMS hospital, 4.9 miles west of Bicknor, the joints in ramps, decks and long building elevations all need attention over time.
Bicknor is about 4 miles south-west of Sittingbourne, in Kent. Commercial clients in Bicknor can call on us for movement joints. Across Kent, 931 places are covered, Bicknor among them. Sites around London have their own page, about 36 miles away.
If you need expansion joint sealing in ME9, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Sites close to Bicknor are covered too, including Hucking (1 mile west), Wormshill (1 mile south-east), Broad Street (2 miles south-west), Hollingbourne (2 miles south-west) and Eyhorne Street (3 miles south-west). Further afield, our area takes in Maidstone (6 miles west), Ashford (14 miles south-east), Sittingbourne (4 miles north-east), Faversham (9 miles east), Minster (10 miles north-east) and Kings Hill (12 miles west).
Landmarks near Bicknor
The nearest railway station is Hollingbourne station, about 2.8 miles south-west of the centre. Nearby you’ll also find Leeds Castle (3.7 miles south-west) and KIMS hospital (4.9 miles west). The countryside around Bicknor includes Detling Hill.
On site: what to expect
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before the next one starts. Jobs in and around smaller places like Bicknor are usually planned as a single visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Before we start on site
- Tell us your opening times and when work is allowed
- Clear stock, furniture or equipment away from the joints
- Warn occupants and staff about the work
Request a quote
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Read more
Different surfaces, different methods
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement.
Concrete and precast panel joints
Concrete edges can be weak or carry release agents that stop adhesion. We prepare the faces thoroughly and prime where the maker calls for it.