The Mastic Doctor team standing beside their branded vans outside an office building
Surrey · England

Expansion and movement joint sealing in Ashford, Surrey

Looking for expansion joint sealing in Ashford? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Sealant peeling off one face of the joint
  • Car park joints leaking onto vehicles below
  • Joints packed with grit and debris
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
South East, London & Scotland
Constructionline member
£5m public liability

Expansion joint sealing for businesses in Ashford

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

About our expansion joint sealing in Ashford

For movement joints in Ashford, photographs and approximate lengths are the best start. Send them through our quote form, and we will arrange a site visit if needed, then send a fixed quote that names the sealant. You can also phone 01277 525 020 or send photos by email to talk the joints through. Most enquiries involve spalled or broken joint edges in floors and decks and weathered movement joint sealant that no longer flexes, across cladding panel joints, brickwork movement joints and podiums and floor movement joints. For commercial sealant work in Ashford, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.

In Ashford, as in most towns, brickwork and panel movement joints on public and commercial buildings age quietly. Once the sealant hardens or splits, water gets into the wall and the joint no longer works.

Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.

Where
Ashford (TW15, TW19, TW13)
Region
Surrey
Guarantee
12 months on every job
Quote
Fixed quote, scope in writing
Phone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Different surfaces, different methods

Car park decks and ramps

Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again.

Joints between different materials

Junctions between brick and render, or concrete and cladding, move independently. The product must bond to both substrates and cope with the movement, with primer where specified.

Diagnose, treat, sign off

Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Most work in Ashford is one building at a time: a school, a unit, an office or a block. Your photographs, drawings or a site visit come first, followed by a fixed quote.

  1. We start with photos, approximate lengths and any drawings, visiting where needed.
  2. We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
  3. Old sealant and debris are cut out of every joint.
  4. Edges are checked, and we tell you if any need repairing before sealing.
  5. The right sealant goes in at the right depth, bonded to the two sides only.
  6. Areas reopen once cured, and the work carries our 12-month guarantee.

Getting the site ready

  • Make sure the joints can be reached
  • Tell us which areas need to stay in use
  • Warn occupants and staff about the work

Getting a fixed quote

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to give us a call on 01277 525 020 or send details through our quote form with what you know.

Ask for a quote

Related advice

Doing it in-house

Certain joints really need a specialist: for example fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.

Questions we’re asked in Ashford

Will our site in Ashford have to close for joint sealing?

In most cases the site keeps working. Joints are done in phases, a bay, aisle or deck at a time. We agree the sequence and timings with you before we start.

Can you work at a site such as Westgate Industrial Estate, by Ashford?

Yes, sites like Westgate Industrial Estate are within our area, along with the rest of Ashford. A few photographs and the unit address let us price the work.

Do your applicators hold CSCS cards?

Yes. We use CSCS-carded applicators, as many construction sites ask for.

Will you come and look before quoting?

Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit before quoting.

How long will the joint resealing take?

That depends on joint lengths, widths, access and how much old sealant or filler needs removing. As a guide, it normally takes a day or so for a modest run of joints, and longer where decks, ramps or floors are done in phases.

Can you fit around our working hours?

Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. You can reach the office between 8am and 5pm, Monday to Friday.

What about RAMS and site documents?

Tell us what site paperwork you need (RAMS, insurance certificate, CSCS details) and we’ll confirm with the quote.

Leave it or put it right?

Re-sealing with the same product that failed is often a false economy. A higher movement class, or a design change by the engineer, may be needed. In a town like Ashford, a split, stained or mouldy joint is often the first thing visitors notice. Renewing it keeps the building looking cared for.

The work involved drives the cost: stripping out, preparation, sealing, access and phasing. Call for a fixed quote.

Why us?

  • One contact handling all your sites
  • Standard and matched colours in many product ranges
  • A fixed quote before work starts
  • 12 months’ guarantee on every job

Take a look at what affects the cost or our accreditations.

Building owners, agents and FMs in Ashford

Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.

Building owners and managing agents use us on sealant work across single buildings or whole portfolios around Ashford. Several sites can go on one quote, which keeps the paperwork simple.

Floors, slabs and movement joints in Ashford

Central London is about 17 miles from Ashford. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital; their floors carry heavy traffic every shift. Ashford has at least three named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.

Warehouse floors on estates like Westgate Industrial Estate (1.1 miles north-east of Ashford) carry pallet trucks and forklifts over every saw-cut joint. For estates staff at a university like Royal Holloway University (4.4 miles west of Ashford), building and paving joints are part of the planned maintenance list. Schools such as Spelthorne College have movement joints in their walls and floors that are easy to overlook.

Ashford is about 6 miles south of Hayes, in Surrey. Ashford sits inside our coverage and the rest of Surrey, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Surrey, 379 places are covered, including Ashford. London is covered too, around 17 miles from Ashford.

If you need expansion joint sealing in TW15, TW19 and TW13, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your site is on Church Road, Station Road and London Road or close by, we can quote for movement joints. Ashford sits on or close to the A30 and A308, useful when we plan access and materials. If your building is just outside Ashford, we cover Littleton Common (1 mile south-east), Ashford Common (1 mile south-east), West Bedfont (1 mile north), Stanwell (2 miles north) and Hounslow (2 miles east). A short drive away, we cover Guildford (14 miles south), Woking (9 miles south-west), Camberley (13 miles south-west), Epsom (11 miles south-east), Ewell (11 miles south-east) and Egham (4 miles west).

Local landmarks in Ashford

Around Ashford, our work takes us to commercial buildings near Clarendon Primary School and Thomas Knyvett College. Ashford has its own railway station: Ashford Surrey station. Well-known places in the area include Ashford Hospital (0.7 miles north) and Spelthorne Museum (2.2 miles west). Green spaces nearby include Staines Reservoirs and Kempton Park Reservoirs.

Map of Ashford © OpenStreetMap contributors

What affects the price in Ashford

To price the job, we consider:

  • Whether the work must be split into stages
  • Joint width, depth and condition
  • Access and working height
  • Specialist products, such as fire-rated or hygienic sealants

Pricing movement joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.

What we need to price the job

Good information means a firmer quote. When you get in touch, include:

  • Drawings or a marked-up plan, if available
  • The postcode of the building
  • Clear photos of the problem areas
  • Whether an asbestos survey exists

The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or call 01277 525 020 or email us if you’d rather talk the job through.

Accreditations

Trusted. Accredited. Insured.