Aberlour expansion joint sealing
Expansion joint sealing in Aberlour, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Movement joints with split or torn sealant
- Leaks through car park deck joints onto the level below
- Hardened, cracked sealant on exposed facades
Expansion joint sealing for businesses in Aberlour
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Slabs, ramps and loading bays in Aberlour
Aberlour is in the east of Scotland, which is drier than the west. Freezing weather and salt still attack open external joints. Sealing them in drier months limits winter damage.
A healthcare site such as Fleming Hospital (0.5 miles south-west of Aberlour) depends on car parks, ramps and service yards whose joints take traffic all day.
Aberlour is about 12 miles south of Elgin, in Moray. Looking for expansion joint sealing in Aberlour? We can help, as we do across Moray. Aberlour is one of 59 places we cover in Moray for movement joints. For work in that direction, see our Aberdeen page.
We cover the AB38 postcode districts. For a building on Mary Avenue, High Street and Hill Avenue or nearby, we can quote for movement joints. If your building is just outside Aberlour, we cover Charlestown of Aberlour (1 mile south-west), Craigellachie (2 miles north-east), Rothes (4 miles north), Dufftown (4 miles south-east) and Drummuir (7 miles east). Nearby towns on our patch include Elgin (12 miles north), Keith (11 miles north-east), Ashgrove (12 miles north), Fochabers (11 miles north-east) and Lhanbryde (11 miles north). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you speak to us on 01277 525 020 or send photos by email.
Around Aberlour
Locally, jobs take us to sites close to The Alice Littler Park and The Mash Tun pub, among other places. A little further out are Ladycroft Agricultural Museum (1.6 miles north-west) and Fleming Cottage Hospital (less than half a mile south-west). Not far away are Ben Aigan.
Expansion joint sealing in Aberlour, done properly
Long runs of brick or block have movement joints built in that most people only notice when the sealant has gone. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied with primer where the maker calls for it. Site teams most often ask us about arrises breaking up along floor joints and leaks through car park deck joints onto the level below, across precast concrete panel joints, cladding panel joints and brickwork movement joints. Facilities teams, main contractors and managing agents in Aberlour tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
For outside joints near Aberlour, the Scottish weather sets the timetable: dry faces and the right temperature are essential. Internal floors can be done whenever suits the site.
Guaranteed is the last step of every job. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.
- Where
- Aberlour (AB38)
- Region
- Moray
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
From enquiry to sign-off
Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and the job ends with a walk round and sign-off. Tell us who will meet us and how to get in at your building near Aberlour. That goes into the plan alongside the quote.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take, and flag anything that needs an engineer.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
Getting the site ready
- Send asbestos survey details if the building is pre-2000
- Let us know about inductions and permits
- Arrange parking or a loading space
Quotes
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Advice
When to call us in Aberlour
Weathering wears down sealant on exposed elevations and decks. UV hardens the surface, and the sealant loses its ability to stretch and opens at the next temperature swing.
Things that usually lead to an enquiry:
- Chipped joint edges on forklift routes
- Water dripping through deck or ramp joints
- Hardened, cracked sealant on exposed facades
- Debris jammed in movement joints
For floors and slabs around Aberlour, the product is chosen for the traffic and the movement at each joint.
Questions to ask before you book
- Can the work be phased to keep areas open?
- Whether their applicators hold CSCS cards
- Proof of insurance
- How long is the guarantee, and what does it include?
What sets the cost
What shapes the price:
- Specialist products, such as fire-rated or hygienic sealants
- Distance, for remote addresses
- Joint width, depth and condition
- Quantities, in metres or numbers
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits.
Details that help us quote
We can often quote from photographs and a few details. Please tell us:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Specification clauses that apply
- Drawings or a marked-up plan, if available
To get a fixed quote, give us a call on 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
What sealant work can’t fix
Being straight saves everyone time. New sealant won’t cure:
- Joints too narrow for the movement, which need redesigning by the engineer
- Proprietary pre-formed expansion joint systems
- Crumbling edges that would give a new bead nothing sound to grip
If you’re not sure, just ring 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
What we seal
- Podiums and floor movement joints
- Cladding panel joints
- Brickwork movement joints
- Precast concrete panel joints
- Car park decks and ramps
- Blockwork control joints
What the job involves on each surface
Cladding panel joints
Cladding panels move more than masonry as they heat and cool. The joints need a low-modulus sealant with enough movement capability.
Car park decks and ramps
Car park joints are some of the hardest-working joints in any building. A trafficable sealant suited to the movement goes in with bays done in phases so the car park keeps running.
Keeping the joints sound
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Look over external and deck joints after a hard winter
- Keep scrapers and ploughs from dragging across joint sealant
- Record the sealant used and the date in the O&M file
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
Movement joints belong on the planned maintenance inspection list. Early splits and edges starting to lift show up on a routine check, when they’re still cheap to deal with. If anything looks wrong, ring 01277 525 020 or email a schedule or drawings with photos.
External wall joints that fail let rain into the masonry and cavity. It can surface inside as damp a long way from the joint by which time the joint has been open for a while. Catching it early keeps the water outside.
Towns and villages near Aberlour
What else we do in Aberlour
Questions about Aberlour
Will our site in Aberlour have to close for joint sealing?
Rarely. Work is phased around your operations. The phasing plan comes with the quote.
Is Aberlour too far out for you?
No. Places such as Aberlour are covered as much as the big towns. Our area covers all of Scotland, cities, towns and islands alike. Good photos up front let us bring everything on the first visit.
What’s the difference between an expansion joint and a movement joint?
Movement joint is the broad term for any joint built in to let a structure move. On site, people tend to use them interchangeably, and the sealing method is much the same.
Do you work to architects’ specifications?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
How do I request a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email us. Include photographs or drawings if you have them.
Will you come and look before quoting?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.