
Construction Mastic in Send
Mastic packages for new-build and refurbishment projects in Send. CHAS accredited and fully insured, with a 12-month guarantee.
- Sanitary sealant damaged by following trades
- Cracks opening in caulked internal joints
- Perimeter gaps outside the sealant’s range
Construction mastic across Send
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Construction mastic in Send, done properly
Buyers, tenants and clients notice sealant lines long before they notice the structure. A smeared bead round a window or a gap behind a worktop ends up on the snag list and clearing them late eats into the handover window. Our aim is joints that pass at the first inspection. Most enquiries involve perimeter gaps outside the sealant’s range and a long mastic snag list close to completion, on brick and block movement joints, floor and skirting junctions and cladding and panel joints. A specialist sealant contractor works differently from a general builder: on jobs in Send, preparation and product choice get the time they need.
In a smaller place such as Send, construction tends to mean small housing schemes, conversions and extensions to community buildings. Small schemes still need window perimeters, facade joints and internal sealant done to the specification.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Send (GU23)
- Region
- Surrey
- Guarantee
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026

Keeping the joints sound
After handover, a little attention goes a long way:
- Record the products used in the O&M file
- Check frame gaps are within the sealant’s range before sealing
- Brief the final clean team to avoid blades near sealant
- Bring the mastic contractor in after the last trades are through
After we’ve sealed an area, it helps to keep other trades from damaging the joints. Fresh sealant needs its cure time before it’s cleaned, painted near or knocked.
Leaving the mastic snag list to the end squeezes everyone. A planned close-out through each area as it completes keeps the list short.
Also in Send
Why act early in Send
It helps to bring the mastic subcontractor in before the package is urgent. We can check joint widths, flag frames with gaps that won’t seal and confirm products against the specification rather than at the snagging stage. Called in at the end, the same issues surface during handover. Over time, UV, weather and movement wear any sealant out. Renewing it in good time keeps the building weathertight.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why clients in Send choose us
- Our applicators hold CSCS cards
- Over 20 years of commercial sealing
- Specification-led, product-correct work
- CHAS accredited contractor
See how commercial sealant jobs are priced or our accreditations and insurance.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. What matters most for a job in Send is a clear list of what needs doing. A fixed quote follows.
- We walk the site or review drawings to understand the package.
- A fixed quote sets out scope, products and phasing.
- Site paperwork is confirmed and our CSCS-carded applicators are inducted.
- Sealing follows the programme as areas are released.
- Problems we find, such as oversized gaps, are raised right away.
- Final snagging is completed and the 12-month guarantee applies.
Before we start on site
- For older buildings, check the asbestos register before work
- Send any specification or drawings in advance
- Tell us which areas need to stay in use
Ask for a quote
A handful of photos and a postcode is the fastest way to a quote. Send them through the quote form, or phone 01277 525 020 or email the details over to discuss it first.
Related advice
Mastic packages on Send sites
Central London is about 24 miles from Send. Construction around the commuter belt mixes station-side flats with refurbished offices and units, and main contractors there need mastic that keeps to the programme. Send sits in one of the drier corners of the country, the South East. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, which is why external dates are agreed with the site manager.
University estates such as University of Surrey - Stag Hill Campus (to the south-west of Send) tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal. When units on a site such as Merrow Business Park (2.2 miles south of Send) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package. For contractors at a college like Woking College, 1.4 miles to the north-west of Send, perimeters and internal sealant are timed for the holidays.
Send is about 3 miles south-east of Woking, in Surrey. Across the GU23 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. Our Surrey coverage takes in 379 places, from busy centres to rural villages. For work in that direction, see our Reading page (22 miles or so).
Postcode districts covered here: GU23. For a building on Sandy Lane, Farm Lane and Sandfields or nearby, send details and we will quote for mastic packages. Nearby places we also cover include Send Marsh (1 mile east), Burntcommon (1 mile east), Sutton Green (1 mile south-west), Mayford (2 miles west) and Pyle Hill (2 miles west) for mastic packages. A short drive away, we cover Guildford (3 miles south-west), Woking (3 miles north-west), Camberley (9 miles west), Epsom (12 miles east), Farnham (13 miles south-west) and Ewell (13 miles east).
Near you in Send
In Send, that means premises near St John the Baptist Catholic Comprehensive School, White Rose Lane and The New Inn, among other places. Send’s nearest station is Clandon station, about 2.2 miles south-east of the centre. Nearby you will also find Send and Ripley History Society Museum (1.8 miles east) and Woking Community Hospital (2.1 miles north-west). Green spaces nearby include Boldermere Lake and Papercourt Marshes.
How the quote is worked out
A fixed quote reflects the actual work. It takes account of:
- Any access equipment needed
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
- The product specified
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Details that help us quote
A few photos plus some basic facts will normally do. It helps to include:
- Clear photographs of the problem areas
- The asbestos register, for older buildings
- Whether the building will be occupied during the work
- How the joints are reached, and at what height
For a fixed quote, ring 01277 525 020 or email us, telling us the site location and the nature of the job. You can also send details through our quote form.
How the job changes by surface
Fire-rated sealant where specified
Not every penetration suits a sealant. Collars, wraps, batts and boards are specified for other services so we’ll flag where the detail needs something different. Record requirements are agreed with the quote.
Snagging before handover
Snagging is often the final mastic stage. We can work through the snag list area by area and damaged joints are redone rather than patched.
Site staff or a sealant specialist?
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
FAQs: Send
Will you take on work at estates like Merrow Business Park, close to Send?
Yes, sites like Merrow Business Park are within our area, along with the rest of Send. Send details of the unit and the work through our quote form for a quick quote.
Is Send off your patch?
Not at all: smaller places are covered as well as towns. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Will you stick to the specified products?
We follow the specified sealant. Product standards such as BS EN 15651 are often named in specifications.
Can you fit around our programme?
Our work is sequenced around the programme. Each plot, floor or elevation is sealed when it’s ready, and we’ll raise anything that holds the work up.
Do you take on mastic snagging only?
Yes, we can. Share the list and photographs, and a fixed quote follows.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Do you need to see the site first?
That depends on the size and complexity of the job. Simple work can often be priced from photographs, while larger or less clear jobs get a site visit first.