Commercial sealant contractors in Tickham, Kent
Our CSCS-carded applicators take on sealant work for offices, shops, hotels and other commercial buildings in Tickham. Send details for a fixed quote.
- Hardened, chalky sealant on south-facing or exposed elevations
- Messy, uneven beads from earlier work that let the building down
- Greasy, split joints in a kitchen or tea point
Commercial sealant contractors near Tickham
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What happens if it’s left?
A failed seal around a window, worktop or panel doesn’t mean the element itself has to go. In many cases the element is fine and only the seal around it has given up. Resealing typically costs far less than renewal. One visit to deal with every failing joint makes more sense than several trips to a place like Tickham. Send photographs of each area and we will quote for the lot.
Pricing sealant joints depends on quantities, condition and access. Call for a quote.
What you get with us
- Fixed quotes based on photos, drawings or a visit
- Work carried out by CSCS-carded applicators
- A Constructionline member, so easy to vet
- Public liability insurance in place
Read what affects the cost or our accreditations.
Commercial sealant contractors for commercial buildings in Tickham
Getting a price for commercial sealant contractors in Tickham doesn’t need to be drawn out. Send photographs, drawings or a schedule of the joints through our quote form. Where the photos don’t tell the full story, we arrange a site visit, followed by a fixed quote rather than an estimate that drifts. Site teams most often ask us about water staining near frames, panels or ceilings and a top-up bead over failed sealant, now lifting, across movement joints in walls and floors, kitchen worktops and splashbacks and floor and threshold joints. Facilities teams, main contractors and managing agents in Tickham tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
The most common commercial job in Tickham is resealing joints that have simply reached the end of their life: hardened, cracked or shrunk away from the faces, and letting water or dirt in.
Work in smaller places such as Tickham tends to come one building at a time: a pub kitchen, a hall, a small office. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
Our workmanship is guaranteed for 12 months, in Tickham as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Tickham (ME9)
- Wider area
- Kent
- Guarantee
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
When to bring in a specialist
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. A poor seal in places like these tends to cost more to put right later.
Frontages, fit-outs and joints in Tickham
Tickham sits in one of the drier corners of the country, the South East. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. Tickham is about 41 miles from central London. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. Firms with branches across the South East can use one contractor for every site.
Whatever the building in Tickham, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material. Premises within reach of Teynham station, 1.4 miles to the north of Tickham, often have busy frontages where joints are seen by everyone passing.
Tickham is about 3 miles west of Faversham, in Kent. We send applicators to Tickham for sealant joints, handled exactly as we handle every other area. We work across 931 places in Kent, from busy centres to rural villages. For work in that direction, see our London page.
We take on sealant joints across the ME9 postcode area, for business premises of every kind. Among the streets we cover are Nouds Lane and Tickham Lane. Close to Tickham, our area also takes in Lewson Street (1 mile north-east), Loyterton (1 mile south-west), Norton Ash (1 mile north-east), Teynham (1 mile north) and Deerton Street (1 mile north-east). Bigger towns within reach include Maidstone (13 miles west), Ashford (12 miles south), Canterbury (12 miles east), Sittingbourne (4 miles north-west), Whitstable (10 miles east) and Faversham (3 miles east).
What’s near Tickham
We work on buildings around The Plough Inn, among other places. The nearest railway station is Teynham station, roughly 1.4 miles north of the centre. Well-known places in the area include Sittingbourne Heritage Museum (3.4 miles north-west) and Newnham Castle (1.9 miles south).
Tickham: questions and answers
Is Tickham off your patch?
Not at all. Tickham is within our area. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Which documents can you supply for work in Tickham?
RAMS, insurance certificate, CSCS details: list what the site needs and we’ll confirm it with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.
What about asbestos in old mastic?
It can, on some older buildings. That’s why we ask for the asbestos information first, and stop if a material is suspect until it’s tested. HSE guidance on asbestos is a useful reference.
How do we get a quote?
The main factors are metres of joint, removal, access, the product and how many phases there are. To get a fixed price, send details through our quote form, or phone or email us.
When can the area be used after sealing?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
How do you keep disruption to occupiers down?
It’s normal for us to work in occupied buildings. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing, until its cure time has passed.
Quoting for work in Tickham
Before we quote, we look at:
- Phasing around occupants
- Quantities, in metres or numbers
- How accessible the joints are
- The product specified
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What we need to price the job
We can often quote from photos and a few details. Please tell us:
- The type of building and who uses it
- When you need the work done
- Anything awkward about access or site hours
- Photos of the joints, close up and from further back
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
Towns and villages near Tickham
More services for Tickham
On site: what to expect
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. Smaller jobs around Tickham can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- We begin with whatever information you have, whether that’s photos, a drawing or a list of locations, and a site visit is booked where it helps.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Site hours, access windows and the order of areas are agreed before we start.
- The failed bead is removed and the joint faces cleaned until they’re sound and dry.
- Backing and primer go in where needed, then the chosen sealant is applied and tooled.
- Each area is inspected, signed off and backed by our 12-month guarantee.
Before we start on site
- Tell staff and tenants when we’ll be in
- Tell us which areas need to stay in use
- Confirm the product named in the specification
Getting a fixed quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we will fill any gaps with a visit.
Read more
For managing agents and facilities managers
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is any of the following:
- Leaking roofs, gutters or flat-roof membranes (those need a roofer)
- Water from a services leak rather than a joint
- Cracking that needs a structural engineer to look at it
If in doubt, call the office on 01277 525 020 or send details through our quote form and we will say what we think before you book.
Joints and surfaces we work on
- Window and door perimeters
- Washrooms and tea points
- Movement joints in walls and floors
- Floor and threshold joints
- Kitchen worktops and splashbacks
- External facade joints