Hollow Street commercial sealant contractors
Looking for commercial sealant contractors in Hollow Street? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Leaks that seem to come through a sealant line
- Earlier reseals applied straight onto the failed bead
- Sanitary sealant that has gone black and patchy
Commercial sealant contractors across Hollow Street
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
About our commercial sealant contractors in Hollow Street
If you look after more than one building, a single sealant contractor saves a lot of chasing. Single jobs, multi-site packages and planned programmes all come to us: send details, get a fixed quote, we seal, and a 12-month guarantee once it’s signed off. For sites in Hollow Street, the quickest start is to call the office on 01277 525 020 or send details through our quote form with a list of addresses. If you have untidy joints in a reception, shop floor or lobby and leaks that seem to come through a sealant line, we can help. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Hollow Street is the same: the right product in a properly prepared joint.
In an occupied building in Hollow Street, the job is planned so areas stay in use: we agree the order with you and hand back each area with its cure time.
A job in a smaller place like Hollow Street is usually a single building. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
Work we carry out in Kent comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or email the details over and we will arrange a return visit.
- Place
- Hollow Street (CT3)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Sealant on show in Hollow Street’s commercial buildings
Hollow Street has two named business or industrial parks inside a 3-mile radius. Each new occupier on a park like these tends to refit, from reception to staff kitchen. Hollow Street is about 56 miles from central London. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site.
On a business park such as Chislet Business Park, 1 mile south-west of Hollow Street, sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters. Premises within reach of Sturry station, 3.6 miles to the south-west of Hollow Street, often have busy frontages where joints are seen by everyone passing. Occupiers with premises at both Chislet Business Park and Canterbury Industrial Park could have the sealant at each handled under one quote.
Hollow Street is about 3 miles south-east of Herne Bay, in Kent. Any commercial site in Hollow Street is covered. We work across 931 places in Kent, large and small. London is covered too, some 56 miles away.
Postcode districts covered here: CT3 for sealant joints. Sites close to Hollow Street are covered too, including Chislet (1 mile north-east), Chitty (1 mile north-east), Old Tree (1 mile north-west), Boyden Gate (1 mile north) and Hoath (1 mile west). Bigger towns within reach include Canterbury (6 miles south-west), Margate (9 miles east), Dover (14 miles south), Ramsgate (10 miles east), Broadstairs (11 miles east) and Whitstable (7 miles west).
Near you in Hollow Street
Locally, jobs take us to sites close to Grove Ferry Picnic Area and Spires Academy and the streets around them. The closest station to Hollow Street is Sturry station, about 3.6 miles south-west of the centre. Well-known places in the area include St Martins Hospital (5.1 miles south-west). Open spaces near Hollow Street include West Blean and Thornden Woods.
After the work
Problems stay small when the joints are checked regularly. In particular:
- Note dates and locations of sealant work for future planning
- On pre-2000 buildings, share the asbestos information before work starts
- Keep barriers up until the new sealant has cured
- Make sure ventilation in wet areas is switched on and working
Our workmanship on each job is backed by a 12-month guarantee. File the handover note with the building records so it’s easy to find if a joint we sealed gives trouble inside the 12 months.
Occupiers often notice failing sealant before the facilities team does, and it reflects on how the building is run. Replacing it on a planned cycle keeps complaints down.
From enquiry to sign-off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. If others near Hollow Street need work, visits can be combined. A fixed quote is given before anything starts.
- You send photographs, drawings or a list of the joints and areas involved, or we arrange a site visit.
- Next comes a diagnosis and a fixed quote.
- Site hours, access windows and the order of areas are agreed before we start.
- We strip the failed bead and prepare both faces of the joint.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Each area is inspected, signed off and backed by our 12-month guarantee.
What we need from you
- Send any specification or drawings in advance
- Flag any permit to work we will need
- Tell staff and tenants when we will be in
Getting a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, phone 01277 525 020 or use the quote form.
Read more
Questions we are asked in Hollow Street
Can you supply sealant in our brand colour for a site in Hollow Street?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
Is Hollow Street too small for you to travel to?
Not at all. Hollow Street is within our area. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.
Will you just go over the old sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Does weather matter for sealant work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Internal work is far less affected.
How many days will you need on site?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
What site paperwork can you provide?
Let us know your requirements when you ask for a price, and we will confirm the RAMS, insurance and CSCS details with the quote. For older buildings we’ll ask for the asbestos register, plus your site induction rules.
Why deal with it now?
Some managers wait for a fit-out before touching the mastic. For internal joints that are only cosmetic, that can make sense, but a joint letting water in now keeps doing damage until the refurb arrives. We can seal the urgent joints now and leave the rest for the programme. Halls, stores and units around places like Hollow Street may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The price depends on the quantity of joints, what has to come out first and the access. Call for a fixed quote when you are ready.
Why appoint us
- Joints cleaned back to sound surfaces
- Constructionline member for supplier checks
- Commercial sealant work since 2005
- One contact handling all your sites
Also in Hollow Street
Building owners, agents and FMs in Hollow Street
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.
CHAS accredited and a Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
What the job involves on each surface
Commercial kitchens and tea points
Kitchen joints along worktops, sinks, splashbacks and wall cladding collect grease and moisture. They’re degreased thoroughly before resealing, and a hygienic or food-safe sealant is used where food contact is possible.
Fire-rated seals where specified
Intumescent and other fire-rated sealants go in at service penetrations and linear gaps to the maker’s tested details, where they are specified. Fire-stopping design and sign-off sit with the designer, fire engineer or building control; we install what’s specified.
Cost factors for sealant joints
We price every job individually. The main factors are:
- Which sealant the job calls for
- Whether old sealant has to be cut out first
- Any access equipment needed
- Quantities, in metres or numbers
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
For an accurate fixed quote, we need a clear picture of the site. Useful things to include:
- Clear photographs of the problem areas
- Whether an asbestos survey exists
- The site address and postcode
- How the joints are reached, and at what height
Let us know the site, the scope and your timescale, and a fixed quote will follow. To get it moving, speak to us on 01277 525 020 or email us.