Hicks Forstal commercial sealant contractors
Sealant work in Hicks Forstal for main contractors, managing agents and facilities managers: sealant work for offices, shops, hotels and other commercial buildings, quoted at a fixed price.
- External beads that have gone brittle and cracked
- Leaks that seem to come through a sealant line
- Smeared sealant across finishes from a rushed job
Commercial sealant contractors near Hicks Forstal
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Sealant applicators in Hicks Forstal
Commercial occupiers rarely want a floor out of action for sealant work. Tell us your site hours and access windows and we will plan around them; phasing keeps some washrooms, kitchens or entrances available while others are done. It’s the same approach in offices, retail units, hotels, schools and healthcare buildings. Site teams most often ask us about messy, uneven beads from earlier work that let the building down and external beads that have gone brittle and cracked, across external facade joints, kitchen worktops and splashbacks and window and door perimeters. Facilities teams, main contractors and managing agents in Hicks Forstal tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
On a typical commercial building in Hicks Forstal, the joints that fail first are the hardest-worked ones: south-facing perimeters, entrance thresholds and busy washrooms.
A job in a smaller place like Hicks Forstal is usually a single building. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and the quote explains what it covers.
- Location
- Hicks Forstal (CT3)
- Wider area
- Kent
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Questions about Hicks Forstal
Is Hicks Forstal too far out for you?
No. Places such as Hicks Forstal are covered as much as the big towns. We work across Greater London and the South East. Good photographs up front let us bring everything on the first visit.
Our building in Hicks Forstal is near the coast: does that change the sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. We choose the product for the exposure, prime where the manufacturer requires it and size the joint for its movement.
Is failed sealant stripped out, or sealed over?
Every failed bead is cut out completely. Laying new silicone on old gives it nothing to grip.
What do you need from us to quote?
Photos, drawings or a schedule of the joints are usually enough to start. Where we need to see it, we’ll arrange a site visit, then send a fixed quote.
How do you keep disruption to occupiers down?
Phased work can be planned so areas stay in use. Tell us your site hours and access windows and we’ll plan around them.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we will price the work to it, flagging anything that needs clarifying.
Is your work guaranteed?
The work is guaranteed for 12 months. Should anything we did fail within that period, let us know.
Also near Hicks Forstal
Other services in Hicks Forstal
What Hicks Forstal’s businesses ask us to seal
The sea is no more than about 3 miles from Hicks Forstal. For shops, hotels and offices, that means frontage and frame joints that weather faster than they would inland. A matched colour is only half the brief on an exposed frontage. Hicks Forstal is about 54 miles from central London. This part of the South East is dense with business parks and out-of-town offices. Multi-site occupiers here often want one sealant contractor across all their buildings.
If you look after units at a retail site such as Buddy's Retail Park, which lies south of Hicks Forstal, shopfront perimeters and shop-fit joints are where a matched colour shows. Occupiers with premises at both Buddy's Retail Park and Chislet Business Park could have the sealant at each handled under one quote.
Hicks Forstal is about 2 miles south of Herne Bay, in Kent. Our applicators travel to Hicks Forstal for work on sealant joints. Our Kent coverage takes in 931 places, large and small. For work in that direction, see our London page (54 miles or so).
Commercial sites across CT3 are covered. If your building is just outside Hicks Forstal, we cover Calcott (1 mile south-west), Herne Common (1 mile north), Knave's Ash (1 mile east), Herne (1 mile north) and Bullockstone (1 mile north-west). A short drive away, we cover Canterbury (4 miles south-west), Margate (12 miles east), Dover (15 miles south-east), Ramsgate (12 miles east), Broadstairs (13 miles east) and Whitstable (4 miles west).
Local landmarks in Hicks Forstal
Recent enquiries here include premises near Curtis Wood, among other places. The closest station to Hicks Forstal is Sturry station, roughly 2.2 miles south of the centre. Well-known places in the area include St Martins Hospital (3.9 miles south) and Canterbury Castle (4.6 miles south-west). Open spaces near Hicks Forstal include West Blean and Thornden Woods.
Commercial clients in Hicks Forstal
When you manage a building on behalf of an owner, clear figures and clear communication matter. You get a fixed quote, an agreed scope and a walk round at the end.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Site staff or a sealant specialist?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Signs you need commercial sealant contractors in Hicks Forstal
Every sealant joint is a maintenance item. Its life comes down to movement, UV and weather, how it’s cleaned, how much traffic passes it and what was used in the first place. On a busy commercial site several of those pile up at once.
If one of these sounds familiar, it’s time for a closer look:
- Messy, uneven beads from earlier work that let the building down
- Layers of sealant, all of them failing
- Weathered facade sealant that no longer flexes
- Sanitary sealant that has gone black and patchy
For premises near Sturry station, 2.2 miles south of Hicks Forstal, footfall is part of the plan: work is phased so shops and offices keep trading.
Questions to ask before you book
- Their pre-qualification and accreditations
- Whether old or failed sealant will be cut out, not overlaid
- Who will actually carry out the work
- The terms of the workmanship guarantee
What happens if it’s left?
Some managers wait for a fit-out before touching the mastic. That’s reasonable for internal joints that are just tired-looking, but external and wet-area joints that already leak shouldn’t wait. We can seal the urgent joints now and leave the rest for the programme. Older rural buildings around Hicks Forstal move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
We don’t publish prices, because the scope varies so much from one building to the next. Call for a quote and we’ll price your job on its own details.
Why us?
- Specification-led, product-correct work
- A range of standard colours, depending on the product
- A fixed quote before work starts
- Joints cleaned back to sound surfaces
Take a look at our cost guide or our accreditations and insurance.
On site: what to expect
Where the site stays busy, we agree a sequence with your contact so the disruption stays in one area at once. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. Smaller jobs around Hicks Forstal can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- We start with the evidence: photographs, drawings or a look on site.
- A fixed quote follows, with removal and preparation included.
- Sequence, access and working times are settled before the first joint is touched.
- The failed sealant comes out and the faces are prepared, with primer where required.
- Depth is set with backing, then the sealant is applied, tooled and the area tidied.
- We hand back each area with its cure time and our 12-month guarantee.
What we need from you
- Send your site hours and access windows
- Warn occupants and staff about the work
- Send asbestos survey details if the building is pre-2000
Request a quote
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we’ll arrange one.
Read more
Surface by surface
Shop fronts and retail fit-outs
Retail work typically has to fit around trading. Tell us your trading hours and access windows and we’ll plan around them, working in sections where that helps.
Window and door perimeters
The perimeter joint between a frame and the structure keeps rain out of the reveal. Failed perimeters are cut out and cleaned, backing goes into deeper gaps, and the joint is resealed with a low-modulus neutral-cure silicone or another suitable product.