The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Commercial sealant contractors in Fox, Hampshire

Looking for commercial sealant contractors in Fox? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.

  • Water staining near frames, panels or ceilings
  • Window and door perimeter joints that have cracked open
  • Weathered facade sealant that no longer flexes
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
Scope agreed and priced before anything starts.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Signed off, with 12 months’ guarantee.
Covering the South East & Scotland
Constructionline member
£5m public liability

Need commercial sealant contractors in Fox?

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

What affects the price in Fox

Your fixed quote is built from the real scope. It takes account of:

  • Travel to remote or island sites
  • The size and state of each joint
  • Whether the work must be split into stages
  • How much there is to seal

Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we will put a fixed figure on it.

Sending details for a quote

Good information means a firmer quote. When you get in touch, include:

  • Approximate linear metres or a joint schedule
  • The site address and postcode
  • The asbestos register, for older buildings
  • A wide shot and a close-up of the area

Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.

Commercial sealant contractors in Fox, done properly

How long a joint lasts is decided before any sealant leaves the gun. Old silicone gives new sealant nothing to grip, so every trace of it is removed, then both faces are cleaned back to sound, dry material with no dust or grease on them. Primer is used wherever the manufacturer calls for it on that surface and the joint depth is controlled with backing rod. If you have mouldy silicone around WCs, urinals and vanity tops and untidy joints in a reception, shop floor or lobby, we can put it right, on washrooms and tea points, floor and threshold joints and movement joints in walls and floors alike. One point of contact handles commercial sealant work in Fox from the first photographs to the final walk-round, for single jobs and planned programmes alike.

If you look after more than one building near Fox, the work can be planned as one programme, with one quote format and one point of contact.

Rural business units near smaller places such as Fox are frequently converted agricultural buildings. Old masonry beside new aluminium, timber and plasterboard gives plenty of joints between materials that move differently, and a sealant colour that suits the building’s character is often part of the brief.

Every job ends the same way: guaranteed. You get a 12-month guarantee on our workmanship, and we explain exactly what that covers when we quote.

The Mastic Doctor team standing beside their branded vans outside an office building
Where
Fox (SP11)
Wider area
Hampshire
Guarantee
A 12-month guarantee
Quote
Fixed quote, scope in writing
Telephone
01277 525 020
Updated
3 November 2026

Your questions answered

Is Weyhill Business Park, near Fox, within your area?

Yes. Our area takes in Fox and its surroundings, with estates and business parks such as Weyhill Business Park included. To start, just speak to us on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.

Do you offer colour-matched sealant for buildings in Fox?

Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photographs and we will confirm what’s available for the product.

Can weather delay the job?

For external joints, yes. The joint has to be dry and within the product’s temperature range, so damp, frosty or very cold days can stop external work. Inside work is seldom held up.

When is resealing likely to be due?

There isn’t a single answer, since movement, weather, cleaning and use all affect it. Regular checks let you plan resealing before leaks or damage.

Do you work for facilities managers and managing agents?

Yes, and through main contractors too. We quote, schedule and report back in the way that suits your process, with a 12-month guarantee on the workmanship.

How do you keep disruption to occupiers down?

It’s normal for us to work in occupied buildings. We agree the order of areas, protect what’s nearby and close off only the section we are sealing for as long as the cure needs.

Who decides which product is used?

A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.

Keeping the joints sound

Once the work is signed off, these steps help:

  • Don’t let cleaning or traffic back on before the cure time is up
  • Keep abrasive pads and scrapers off resealed joints
  • Log reseals in the O&M or maintenance records
  • Deal with small splits before they become leaks

In washrooms and kitchens, extraction makes a real difference to sealant life. Fans that are broken or switched off leave joints damp for longer, which is how mould gets back in. Your maintenance team can look at extract fans at the same time.

An open joint in a food area or toilet collects dirt and moisture that cleaning can’t reach. Cleanability is something environmental health officers pay attention to, which makes sound joints worth keeping on top of.

What we are called out for in Fox

In wet areas the enemy is usually mould rather than movement. Constant moisture, cleaning chemicals and weak extraction let mould grow into the sealant. Replacement with a sanitary anti-mould silicone is the lasting answer.

Site and facilities staff are often the first to spot these:

  • A top-up bead over failed sealant, now lifting
  • Water staining near frames, panels or ceilings
  • Shrunken sealant along kitchen worktops and splashbacks
  • External beads that have gone brittle and cracked

A business with units at Weyhill Business Park and Plot 5 Andover Business Park needn’t use two contractors for its sealant.

What your quote should include

  • Are they CHAS accredited or on Constructionline?
  • How long is the guarantee, and what does it include?
  • Is the sealant right for the movement and the substrate?
  • Whether their applicators hold CSCS cards

Our contractor checklist

Different surfaces, different methods

Commercial kitchens and tea points

Gaps and ragged beads trap dirt that cleaning can’t reach, which matters when environmental health officers look at a kitchen. We seal to a neat, cleanable finish and work around service times you agree with us.

Fire-rated seals where specified

Fire-rated sealant is only one type of fire-stopping product. Collars, wraps, batts and boards are specified for other services and gaps, and we’ll tell you if the detail calls for something else.

Working on commercial sites near Fox

Fox is about 68 miles from central London. Business parks and retail centres are common around the capital’s motorway corridors. Firms with branches across the South East can use one contractor for every site. The 3 miles around Fox take in at least three named trading estates, business parks or retail parks. Units on sites like these change tenants and get refitted, and each refit leaves joints to seal.

On a business park such as Weyhill Business Park, 2.1 miles north-east of Fox, sealant work tends to follow fit-outs: receptions, tea points, washrooms and frame perimeters. For premises near Grateley station, which lies south-west of Fox, footfall is part of the plan: work is phased so shops and offices keep trading.

Fox is about 5 miles west of Andover, in Hampshire. Looking for commercial sealant contractors in Fox? We can help. Fox is one of 723 places we cover in Hampshire. Southampton is covered too, around 21 miles from Fox.

Work on sealant joints is covered throughout SP11, for business premises of every kind. Just outside Fox, we also work in Amport (1 mile north-east), Monxton (1 mile north-east), Abbotts Ann (2 miles east), Kentsboro (2 miles south) and Little Ann (3 miles east). A short drive away, we cover Winchester (15 miles south-east), Andover (5 miles east), Romsey (14 miles south), Hyde (14 miles south-east), Tidworth (5 miles north-west) and Weeke (14 miles south-east).

Near you in Fox

Fox’s nearest station is Grateley station, about 2.1 miles south-west of the centre. Other landmarks nearby include Andover War Memorial Hospital (4.2 miles north-east). For a walk, there’s Mill Lake and Anton Lakes.

Map of Fox © OpenStreetMap contributors

What we can’t put right

Honesty saves time and money. Fresh joints won’t solve:

  • Walls or slabs moving more than any sealant can take
  • Removing asbestos-containing materials (a licensed or specialist contractor’s job)
  • Broken glass or blown double-glazed units

If you are not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer before you book.

Where we work in Fox

  • Kitchen worktops and splashbacks
  • External facade joints
  • Movement joints in walls and floors
  • Floor and threshold joints
  • Washrooms and tea points
  • Window and door perimeters

Our process

Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and each bead is tooled to a neat concave finish. For work around Fox, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.

  1. First, details come to us: photos, drawings or a schedule of the areas.
  2. Next comes a diagnosis and a fixed quote.
  3. Before anything is cut out, we agree access, timings and sequence.
  4. We strip the failed bead and prepare both faces of the joint.
  5. We fit backing to the right depth, prime where specified and lay the new bead.
  6. Finished joints are checked with you and handed over with our 12-month guarantee.

Getting the site ready

  • Move anything stored against the joints
  • Confirm the product named in the specification
  • Arrange parking or a loading space

Get a fixed quote

Quotes are fixed against the scope you send, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or email us.

Ask for a quote

Advice

Accreditations

Trusted. Accredited. Insured.