Commercial Sealant Contractors in Eyhorne Street
Sealant work in Eyhorne Street for main contractors, managing agents and facilities managers: sealant work for offices, shops, hotels and other commercial buildings, quoted at a fixed price.
- Damp patches where an external joint has failed
- Hardened, chalky sealant on south-facing or exposed elevations
- Movement joints packed with grit and debris
Commercial sealant contractors for businesses in Eyhorne Street
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Should maintenance staff do it?
Redoing a failed joint typically costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.
Commercial sealant contractors for commercial buildings in Eyhorne Street
Sealant joints are easy to overlook until one lets water in, and on a working site that typically surfaces as a leak, a stain or a complaint from occupiers. Mastic Doctor works as a commercial sealant contractor for facilities managers, managing agents and main contractors with sites in Eyhorne Street. We find out why the sealant joints failed, take them out and seal again using a sealant that suits the joint. If you’re dealing with earlier reseals applied straight onto the failed bead and external beads that have gone brittle and cracked, we can put it right, on floor and threshold joints, kitchen worktops and splashbacks and window and door perimeters alike. Facilities teams, main contractors and managing agents in Eyhorne Street tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
A lot of what we do in Eyhorne Street is replacing sealant that has done its years: hardened, cracked or shrunk away from the faces, and letting water or dirt in.
A job in a smaller place like Eyhorne Street is typically a single building. We will want a full list and photographs first, so the right products come on the day and nothing waits for a second trip.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Location
- Eyhorne Street (ME17)
- Wider area
- Kent
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
How a job runs
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. Smaller jobs around Eyhorne Street can be grouped with others nearby. A fixed quote is given before anything starts.
- First, details reach us through the quote form or a site visit.
- We diagnose the cause of failure and price a fixed scope.
- Work is phased around your occupiers where areas need to stay in use.
- Old sealant is cut out completely, never sealed over.
- Each joint gets a suitable sealant, laid to depth and tooled.
- We check the work with you, and the 12-month guarantee starts.
Getting the site ready
- Tell us what induction or permit system the site runs
- Tell staff and tenants when we will be in
- Send your site hours and access windows
Getting a fixed quote
For a fixed quote, speak to us on 01277 525 020 or email drawings and photos. You can also send details through our quote form.
Read more
Common questions from Eyhorne Street clients
Is Roebuck Business Park, near Eyhorne Street, within your area?
Yes. Estates, retail parks and business parks around Eyhorne Street, Roebuck Business Park among them, are all within reach. Photos and a short description are enough for a first look.
Is Eyhorne Street too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
Can weather delay the job?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Is your work guaranteed?
It’s backed by our 12-month guarantee. Should anything we did fail within that period, let us know.
Can you handle sealant work across several sites?
Yes, across South East England, Greater London and all of Scotland. One contact and one process for every building makes a portfolio easier to manage.
Can you take on work for an FM or managing agent?
Yes. A large share of our work comes through facilities managers, managing agents and landlords, alongside main contractors. We can work to your instruction process and site rules.
Places near Eyhorne Street
Also in Eyhorne Street
Aftercare for building managers
For the best life from the joints:
- Don’t let cleaning or traffic back on before the cure time is up
- Keep abrasive pads and scrapers off resealed joints
- Put external and wet-area joints on a regular inspection round
- Note dates and locations of sealant work for future planning
Give fresh sealant time to cure before it’s cleaned, wetted or walked past. Cure time varies with the product, conditions and depth of the joint, so we confirm it for each area at handover. Leaving the area closed until then keeps the bead neat.
Each spell of wet weather pushes more water through an open joint. It can run into cavities, insulation and internal finishes long before anyone sees a stain. Catching it at the sealant stage avoids the bigger repair.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is any of the following:
- Leaks from pipework, wastes or valves (that’s plumbing)
- Misted, cracked or failed glazing units (a glazier’s job)
- A failed roof covering or waterproofing membrane
If you’re not sure, just ring 01277 525 020 or email us and we’ll give you a straight answer before you book.
Surfaces we seal
- Floor and threshold joints
- Washrooms and tea points
- External facade joints
- Kitchen worktops and splashbacks
- Movement joints in walls and floors
- Window and door perimeters
Commercial clients in Eyhorne Street
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Eyhorne Street can form part of a wider programme.
Sealant on show in Eyhorne Street’s commercial buildings
Eyhorne Street is in the South East, one of the UK’s drier regions. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings. Eyhorne Street has a number of hotels close by, all within 2 miles. In hotels, sealant shows everywhere, from bathroom joints to reception counters, so colour and a clean finish matter; work is planned so the hotel keeps trading.
For premises near Hollingbourne station (under half a mile north of Eyhorne Street), footfall is part of the plan: work is phased so shops and offices keep trading.
Eyhorne Street is about 4 miles east of Maidstone, in Kent. We cover Eyhorne Street, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 931 places across Kent fall within our area, including Eyhorne Street. Our London page has more on work in that area.
Business premises anywhere in ME17 are within our area. Buildings on Eyhorne Street, Tile Fields and Tile Fields Close are within our area. Close to Eyhorne Street, our area also takes in Hollingbourne (1 mile north-east), Ashbank (1 mile south-west), Broomfield (1 mile south), Leeds (1 mile south-west) and Broad Street (1 mile north). Bigger towns within reach include Maidstone (4 miles west), Ashford (13 miles south-east), Sittingbourne (7 miles north-east), Faversham (12 miles east), Minster (13 miles north-east) and Kings Hill (10 miles west).
Local landmarks in Eyhorne Street
We work on buildings around Glyder House Sugar Loaves Public House, among other places. There’s a railway station in Eyhorne Street itself: Hollingbourne station. Well-known places in the area include KIMS hospital (3.6 miles north-west) and Leeds Castle (0.9 miles south). For a walk, there’s Detling Hill.
Common problems we fix in Eyhorne Street
External sealant takes a steady beating from the weather. Sunny elevations dry the surface out and exposed ones take driving rain; in time the surface chalks, hardens and cracks. Once it stiffens, the joint opens up at the next big temperature swing.
These are often picked up first by site or facilities staff:
- Layers of sealant, all of them failing
- Damp patches where an external joint has failed
- Smeared sealant across finishes from a rushed job
- Hardened, chalky sealant on south-facing or exposed elevations
Offices at parks like Roebuck Business Park (to the south-east of Eyhorne Street) have receptions, kitchens and glazed partitions where a tidy joint matters.
What your quote should include
- Their plan for phasing and protecting the area
- Whether old or failed sealant will be cut out, not overlaid
- Do they follow the manufacturer’s priming guidance?
- Health and safety accreditation such as CHAS