The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Sealant specialists in Chilbolton

Our CSCS-carded applicators take on sealant work for offices, shops, hotels and other commercial buildings in Chilbolton and the surrounding area. Send details for a fixed quote.

  • Leaks that seem to come through a sealant line
  • A top-up bead over failed sealant, now lifting
  • Greasy, split joints in a kitchen or tea point
1
Send details
Tell us about the site, with photos if you have them.
2
Get a quote
A fixed quote for the work, with the scope in writing.
3
We seal
Prepared joints, the specified product, a tidy finish.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
CHAS accredited
£5m public liability

Commercial sealant contractors in Chilbolton

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Commercial mastic work in Chilbolton

Most of the buildings we seal stay open while we are there. Tell us your site hours and access windows and we will plan around them. That applies whether the building is an office, a shop, a hotel, a college or a care home. We work on floor and threshold joints, movement joints in walls and floors and kitchen worktops and splashbacks, and the usual reasons a site gets in touch are damp patches where an external joint has failed and frame sealant that has cracked, shrunk or pulled away. Facilities teams, main contractors and managing agents in Chilbolton tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.

In an occupied building in Chilbolton, the job is planned so areas stay in use: we agree the order with you and hand back each area with its cure time.

A job in a smaller place like Chilbolton is normally a single building. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.

Work we carry out comes with a 12-month guarantee. Should something we installed fail, call the office on 01277 525 020 or email a schedule or drawings and we’ll come back to it.

Mastic Doctor team members lined up next to their branded vans outside an office building
Location
Chilbolton (SO20)
Region
Hampshire
Cover
12 months on every job
Quotes
Fixed quote, scope in writing
Telephone
01277 525 020
Updated
3 November 2026

What sealant work can’t fix

Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. These need a different solution:

  • Leaking roofs, gutters or flat-roof membranes (those need a roofer)
  • Structural cracks or movement the joints weren’t designed for
  • Faulty windows rather than failed perimeter sealant

If you’re not sure, just give us a call on 01277 525 020 or email the details over and we’ll give you a straight answer before you book.

What we seal

  • Floor and threshold joints
  • Washrooms and tea points
  • External facade joints
  • Window and door perimeters
  • Kitchen worktops and splashbacks
  • Movement joints in walls and floors

Questions about Chilbolton

Do you offer colour-matched sealant for buildings in Chilbolton?

Yes, we can normally get close to most finishes from the product’s colour range. The quote lists the colours the product is made in.

Is Chilbolton too far out for you?

No. Small places get the same service as large ones. London and every South East county are within our area. Good photographs up front let us bring everything on the first visit.

Can you work to our specification?

Yes. The specification and the manufacturer’s installation guidance are what we work to.

Could the old sealant in an older building contain asbestos?

It’s possible in older buildings, especially those built before 2000. We ask to see the asbestos register or survey before disturbing old sealant, and if something is suspected, work stops until it’s tested.

How do you choose the sealant?

The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.

Will the building have to shut during the work?

Most of the buildings we work in stay occupied. We agree the order of areas, protect what’s nearby and close off only the section we’re sealing, until its cure time has passed.

Is the old sealant taken out first?

Every scrap of failed sealant is removed before the new bead goes on. A bead laid on old silicone peels away, so it isn’t something we do.

Why deal with it now?

Spot repairs have their place. If the rest of the bead is the same age and product, though, it’s normally close behind. We can price both options so you can decide on the facts. Halls, stores and units around places like Chilbolton may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.

Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.

Why choose Mastic Doctor in Chilbolton

  • Constructionline member
  • Failed material removed, not covered up
  • RAL and finish matching where the product range allows
  • A range of standard colours, depending on the product

See how commercial sealant jobs are priced and our accreditations.

What sets the cost

Quotes vary with the job. Expect it to depend on:

  • The site’s rules and procedures
  • Distance, for remote addresses
  • Backing rod, priming and other preparation
  • Any access equipment needed

The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.

Details that help us quote

There’s no need for a formal survey. These details are enough to start:

  • Photos of the joints, close up and from further back
  • When you need the work done
  • Whether the building will be occupied during the work
  • The site address and postcode

Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, speak to us on 01277 525 020 or email drawings and photos.

What we’re called out for in Chilbolton

A good share of the joints we inspect were topped up instead of being renewed. Fresh sealant won’t stick to the old bead underneath, so the top layer lifts, holds water and hides what’s going on. Getting back to a clean joint then means removing every layer.

Most enquiries start with one or more of the following:

  • Smeared sealant across finishes from a rushed job
  • Movement joints packed with grit and debris
  • Sanitary sealant that has gone black and patchy
  • Leaks that seem to come through a sealant line

Industrial estates such as Harewood Forest Industrial Estate (2.6 miles north-east of Chilbolton) have offices, trade counters and welfare areas whose sealant ages like any other building’s.

What your quote should include

  • How long is the guarantee, and what does it include?
  • Which product they’ll use, and why it suits the joint
  • Who will actually carry out the work
  • Their plan for phasing and protecting the area

Questions to ask before you appoint anyone

Building owners, agents and FMs in Chilbolton

We work for building owners and managing agents on sealant work across single buildings or whole portfolios around Chilbolton. Several sites can go on one quote, which keeps the paperwork simple.

For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. Programme, specification and site rules come first.

Shops, offices and hotels in and around Chilbolton

Chilbolton sits in one of the drier corners of the country, the South East. Even so, outside sealing waits for a dry joint, and cold, damp mornings can delay it. Central London is about 63 miles from Chilbolton. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site.

For premises near Andover station (4.7 miles north-west of Chilbolton), footfall is part of the plan: work is phased so shops and offices keep trading.

Chilbolton is about 4 miles south-east of Andover, in Hampshire. Across the SO20 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Sites around Southampton have their own page, roughly 16 miles from Chilbolton.

Anyone looking for commercial sealant contractors in SO20 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Station Road, Test Rise and Drove Hill or close by, we can quote for sealant joints. If your building is just outside Chilbolton, we cover Cottonworth (1 mile west), Wherwell (1 mile north), Fullerton (1 mile west), Leckford (2 miles south-west) and Wherwell Wood (2 miles north-west). A short drive away, we cover Winchester (8 miles south-east), Eastleigh (13 miles south), Andover (4 miles north-west), Chandler's Ford (12 miles south), Romsey (11 miles south) and Hyde (8 miles south-east).

Local landmarks in Chilbolton

Locally, jobs take us to sites close to Longstock Park and Abbots Mitre pub, among other places. For rail, the closest station is Andover station, about 4.7 miles north-west. Other landmarks nearby include Andover War Memorial Hospital (5 miles north-west). The countryside around Chilbolton includes Mill Lake.

Map of Chilbolton © OpenStreetMap contributors

From enquiry to sign-off

Diagnose, treat, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. If others near Chilbolton need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.

  1. First, details reach us through the quote form or a site visit.
  2. The cause is diagnosed and the scope priced as a fixed quote.
  3. Work is phased around your occupiers where areas need to stay in use.
  4. Old sealant is cut out completely, never sealed over.
  5. A suitable product for each joint goes in at the right depth and is tooled.
  6. We check the work with you, and the 12-month guarantee starts.

Getting the site ready

  • Tell us what induction or permit system the site runs
  • Send your site hours and access windows
  • Confirm the product named in the specification

Get a fixed quote

The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or phone 01277 525 020 or use the quote form to discuss it first.

Ask for a quote

Related advice

Accreditations

Trusted. Accredited. Insured.