Sealant specialists in Anthill Common
Commercial sealant contractors for Anthill Common, from a contractor working since 2005. Fully insured, with a 12-month guarantee.
- Wall and floor joints that have lost their seal
- Mouldy silicone around WCs, urinals and vanity tops
- Greasy, split joints in a kitchen or tea point
Commercial sealant contractors across Anthill Common
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Working on commercial sites near Anthill Common
Anthill Common is in the South East, one of the UK’s drier regions. External joints still need dry faces and the right temperature, and damp or frosty mornings can hold work up. Central London is about 59 miles from Anthill Common. Business parks and retail centres are common around the capital’s motorway corridors. If you have premises across the region, one contractor can cover them all.
For a hotel such as The George Hotel, which lies north of Anthill Common, the colour of a joint at the bar or the bath matters to the look of the room. Premises within reach of Portchester station, 4.6 miles south of Anthill Common, often have busy frontages where joints are seen by everyone passing. If you run an office at a site such as Parklands Business Park, 1.2 miles to the south-east of Anthill Common, the sealant at reception desks, tea points and frames ages with each fit-out.
Anthill Common is about 3 miles north-west of Waterlooville, in Hampshire. We send applicators to Anthill Common for sealant joints, handled exactly as we handle every other area. Our Hampshire coverage takes in 723 places. Our Portsmouth page has more on work in that area, about 7 miles away.
Commercial sites across PO7 are covered. Buildings on Broad Lane, School Lane and Uplands Road are within our area for sealant joints. Just outside Anthill Common, we also work in Denmead (1 mile south-east), Hambledon (1 mile north), Anmore (2 miles east), Wecock Farm (2 miles east) and Lovedean (3 miles east). Nearby towns on our patch include Winchester (14 miles north-west), Gosport (8 miles south), Havant (5 miles south-east), Eastleigh (12 miles west), Fareham (6 miles south-west) and Chandler's Ford (14 miles west).
Around Anthill Common
Locally, jobs take us to sites close to Fox and Hounds pub and the streets around them. The closest station to Anthill Common is Portchester station, about 4.6 miles south of the centre. Well-known places in the area include Queen Alexandra Hospital (4.2 miles south). For a walk, there’s St Clair's Meadow and Portsdown Hill.
Commercial mastic work in Anthill Common
Sealant joints are easy to overlook until one lets water in, and on a working site that typically surfaces as a leak, a stain or a complaint from occupiers. Mastic Doctor works as a commercial sealant contractor for facilities managers, managing agents and main contractors looking after property in Anthill Common. We find out why the sealant joints failed, take them out and seal again using a sealant that suits the joint. We work on movement joints in walls and floors, external facade joints and floor and threshold joints, and what we’re called in for most is sanitary sealant that has gone black and patchy and hardened, chalky sealant on south-facing or exposed elevations. Whoever orders the work in Anthill Common, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
A lot of what we do in Anthill Common is replacing sealant that has done its years: split, chalky or peeling, with leaks or mould starting behind it.
Rural business units near smaller places such as Anthill Common are frequently converted agricultural buildings. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Anthill Common (PO7)
- Region
- Hampshire
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Misted, cracked or failed glazing units (a glazier’s job)
- Removing asbestos-containing materials (a licensed or specialist contractor’s job)
- A failed roof covering or waterproofing membrane
Not sure which it is? You can call 01277 525 020 or email the details over and we will tell you honestly before you book.
Surfaces we seal
- Movement joints in walls and floors
- Window and door perimeters
- Washrooms and tea points
- External facade joints
- Floor and threshold joints
- Kitchen worktops and splashbacks
Commercial clients in Anthill Common
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Anthill Common can form part of a wider programme across Hampshire.
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
On site: what to expect
When we get to site, we sign in, go through any site induction and check how permits are handled. Floors, finishes and fittings next to the joints are covered before any cutting starts, and the work usually takes a few hours for one area, or a planned series of visits across a bigger building. Smaller jobs around Anthill Common can be grouped with others nearby. You’ll have a fixed quote before work starts.
- You send photos, drawings or a list of the joints and areas involved, and a site visit is booked where it helps.
- The failure is diagnosed and a fixed quote issued for the work agreed.
- Site hours, access windows and the order of areas are agreed before we start.
- We strip the failed bead and prepare both faces of the joint.
- We fit backing to the right depth, prime where specified and lay the new bead.
- Finished joints are checked with you and handed over with our 12-month guarantee.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Arrange parking or a loading space
- Confirm the product named in the specification
Getting a fixed quote
Need a figure for a tender or a budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, speak to us on 01277 525 020 or email the details over.
Read more
Also near Anthill Common
Other services in Anthill Common
Anthill Common: questions and answers
Do you offer colour-matched sealant for buildings in Anthill Common?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
Is Anthill Common too far out for you?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Will the building have to shut during the work?
It’s mostly about sequence: areas are phased, access windows agreed and enough washrooms or entrances left in use. Tell us what has to stay open and we’ll plan the job around it.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, since fresh sealant will not bond reliably to aged material.
How long do sealant joints last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Do you check for asbestos before removing sealant?
In buildings from before 2000 in particular, some old mastics and sealants may contain asbestos. Before cutting anything out, we ask for the asbestos register or survey, and anything suspect is left until it has been tested.
What sets the cost
Before we quote, we look at:
- Whether the work must be split into stages
- Removal of failed or old sealant
- Travel to remote or island sites
- The site’s rules and procedures
What a job costs comes down to the quantity of joints, how much old material needs removing and the access. Call for a fixed quote when you’re ready.
Sending details for a quote
Good information means a firmer quote. Helpful details to send:
- How the joints are reached, and at what height
- What the building is and how it’s used
- Your programme or deadline
- Photos of the joints, close up and from further back
Send us photographs, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we’ll arrange a site visit.
Keeping the joints sound
After handover, these steps help:
- Respect the cure time before reopening an area
- Log reseals in the O&M or maintenance records
- Keep abrasive pads and scrapers off resealed joints
- Check joints after other trades have worked nearby
Add the resealed joints to your planned maintenance inspections. Regular checks pick up small failures before they become leaks, with external elevations and wet areas first in line. If anything looks wrong, call 01277 525 020 or email drawings and photos with a photo.
Each spell of wet weather pushes more water through an open joint. Behind a panel or frame, that water can sit unseen for a long time. Resealing early keeps the problem in the sealant and out of the building.
Doing it in-house
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.