The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Coloured and colour-matched sealant in Wildhern, Hampshire

Planning work on a colour-matched joint in Wildhern? We look at it, seal it with the right product and hand it over with a 12-month guarantee.

  • Failed coloured sealant that has split or peeled
  • Shop fits that need consistent sealant colours across sites
  • Colour changes after a rebrand or refit
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
CSCS-carded applicators, the right product for each joint.
4
Guaranteed
Our workmanship is guaranteed for 12 months.
Covering the South East & Scotland
CHAS & Constructionline
£5m public liability

Coloured sealant near Wildhern

Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.

How we handle coloured sealant in Wildhern

In retail, hospitality and office fit-outs, joints are seen close up every day. A mismatched bead can make good joinery look unfinished, even when the seal is sound. We pick a colour from the product’s range that sits with the finish. Site teams most often ask us about smeared sealant on stone or joinery and stained or mouldy coloured joints in washrooms, across powder-coated and anodised frames, shop-fit joinery and counters and natural stone and brick. A specialist sealant contractor works differently from a general builder: in Wildhern, that means joint design, primers and backing rod as standard.

Business units in the countryside around places like Wildhern are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials.

Every job ends the same way: guaranteed. Our workmanship is backed for 12 months, and we explain exactly what that covers when we quote.

Where
Wildhern (SP11)
Region
Hampshire
Guarantee
12 months on every job
Quotes
A fixed quote before we start
Phone
01277 525 020
Updated
3 November 2026
The Mastic Doctor team standing beside their branded vans outside an office building

Signs you need coloured sealant in Wildhern

Most enquiries start with a joint that looks wrong: a pale bead on a dark frame, or an old seal that has discoloured. Replacing it with a suitable colour restores the intended look.

If one of these sounds familiar, it’s time for a closer look:

  • Colour changes after a rebrand or refit
  • A bead that fights the cladding or frame colour
  • Old colour-matched joints lifting at the edges
  • Smeared sealant on stone or joinery

Shops and cafés around stations like Andover station (3.1 miles south of Wildhern) trade from early, so work is timed around them.

Comparing quotes

  • Is depth set with backing rod, or bond-breaker tape in shallow joints?
  • What level of public liability insurance do they hold?
  • How long is the guarantee, and what does it include?
  • Health and safety accreditation such as CHAS

Questions to ask before you appoint anyone

Your questions answered

Is Wildhern off your patch?

No. Small places get the same service as large ones. London and every South East county are within our area. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.

Can you work at a site such as Glenmore Trade Park, by Wildhern?

Yes. We cover Wildhern and the area around it, including industrial estates, business parks and retail parks such as Glenmore Trade Park. Send details of the unit and the work through our quote form for a quick quote.

What about RAMS and site documents?

Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.

Do you match sealant to RAL colours?

Yes. We compare the RAL reference with the colours made for the specified sealant. We’ll tell you which colour is closest before work starts.

Do you use coloured sanitary silicone?

Yes, in many cases. Hotel bathrooms, washrooms and kitchens often use coloured sanitary silicone to suit tiles or stone.

How much does the work cost?

We don’t publish prices, because every site is different. With photographs or drawings, we can give you a fixed quote.

Can you work to our specification?

Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.

What sealant work can’t fix

We seal joints; we don’t mend everything behind them. On its own, sealant can’t deal with:

  • Repairing damaged frames or cladding
  • Stopping sealant from ever changing colour outdoors
  • A guaranteed perfect match to every finish

If you are not sure, just give us a call on 01277 525 020 or send details through our quote form and we will give you a straight answer before you book.

Surfaces we seal

  • Hotel bathrooms and public areas
  • Office fit-out finishes
  • Powder-coated and anodised frames
  • Natural stone and brick
  • Shop-fit joinery and counters
  • Cladding panels

How a job runs

Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed before the next one starts. For a building around Wildhern, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.

  1. First we agree which sealant type the joint needs.
  2. We compare the target colour with the colours available.
  3. The nearest colour is agreed, with a sample bead where needed.
  4. The existing bead comes out, then faces are cleaned and backed.
  5. Edges are masked and the coloured sealant applied and tooled.
  6. We remove the masking and walk the finished joints with you.

What we need from you

  • Tell us your opening times and when work is allowed
  • Arrange parking or a loading space
  • Make sure the joints can be reached

Ask for a quote

Need a figure for a tender or a budget? We will quote against your scope and drawings that you can work with. If you have questions first, ring 01277 525 020 or email us.

Ask for a quote

Read more

Working on commercial sites near Wildhern

Rainfall across the South East, Wildhern included, is lower than in many parts of the UK. That helps, but frost and condensation on glass and coated frames still stop outside sealing on some winter mornings. Wildhern has at least three named business or industrial parks inside a 3-mile radius. Each new occupier on a park like these tends to refit, from reception to staff kitchen; brand colours often come into it.

A business with units at Glenmore Trade Park and Enham Arch Retail Park needn’t use two contractors for its sealant. If you run a unit on an estate such as Glenmore Trade Park, which lies south of Wildhern, the trade counter, offices and staff facilities have joints to look after as well as the warehouse.

Wildhern is about 3 miles north of Andover, in Hampshire. Any commercial site in Wildhern is covered, whether it’s a single job or part of a planned programme. 723 places across Hampshire fall within our area, including Wildhern. We also cover Southampton, some 24 miles away.

Anyone looking for coloured sealant in SP11 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Sites close to Wildhern are covered too, including Upper Enham (1 mile south-east), Enham Alamein (1 mile south-east), Little London (2 miles east), Knights Enham (2 miles south-east) and Smannell (2 miles south-east). Further afield, our area takes in Andover (3 miles south), Hyde (15 miles south-east), Tidworth (7 miles west), Weeke (15 miles south-east), Kempshott (15 miles east) and Ludgershall (5 miles west).

Local landmarks in Wildhern

Around Wildhern, our work takes us to commercial buildings near The Hare & Hounds pub. The nearest railway station is Andover station, roughly 3.1 miles south of the centre. Other landmarks nearby include Finkley Down Farm Museum (3.1 miles south-east) and Andover War Memorial Hospital (2.8 miles south). For a walk, there’s Anton Lakes and Mill Lake.

Map of Wildhern © OpenStreetMap contributors

Owners, agents and contractors

CHAS accredited and a Constructionline member, we are straightforward to vet for your supplier list. We’re fully insured, and our insurance certificate can go with the quote.

Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, and each stage is agreed with your contact.

Cost factors for colour-matched joints

To price the job, we consider:

  • How much existing material needs removing
  • Backing rod, priming and other preparation
  • The total length or number of joints
  • Specialist products, such as fire-rated or hygienic sealants

Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.

Details that help us quote

For an accurate fixed quote, we need to understand the site. Send us:

  • Approximate linear metres or a joint schedule
  • A wide shot and a close-up of the area
  • Any dates the work must fit around
  • The asbestos register, for older buildings

For a fixed quote, speak to us on 01277 525 020 or email drawings and photos with the site address and an outline of the work. Our quote form is another easy route.

Site staff or a sealant specialist?

General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.

Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong normally costs more in the end than doing them right.

Accreditations

Trusted. Accredited. Insured.