Three Ashes coloured sealant
Coloured and colour-matched sealant for visible joints in Three Ashes. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- A bead that fights the cladding or frame colour
- Dirty, discoloured joints in public areas
- Weathered sealant that no longer matches
Coloured sealant in Three Ashes
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Three Ashes, done properly
We can agree a short trial length before the full run. Sealant can look slightly different once it has cured, and again in different light. Tell us who needs to approve the colour and we will plan for it. If you have standard-colour sealant spoiling a high-end finish and fit-outs with a sealant colour in the specification, we can put it right, whatever the surface. Most enquiries from Three Ashes start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
In and around smaller places such as Three Ashes, the commercial buildings we’re asked about are often pubs, shops, village halls and barns converted to offices. Kitchens, toilets and window frames in all of them need resealing sooner or later.
The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Three Ashes (RG7)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Aftercare for building managers
After handover, these steps help:
- Reseal whole runs rather than patching single joints
- Approve a sample bead on high-profile areas
- Clean coloured joints with mild products
- Use one colour standard across multi-site work
Expect some change in appearance over the years. Some fading is part of normal ageing outdoors.
Make sure every contractor knows which sealant and colour are on the building file. It stops mismatched repairs creeping in.
When something else is needed
Being straight saves everyone time. New sealant won’t cure:
- Finishes that change colour from one area to another
- Exact bespoke colour matches beyond the product’s range
- Preventing all fading from sunlight and weathering
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we’ll tell you honestly.
Joints and surfaces we work on
- Shop-fit joinery and counters
- Natural stone and brick
- Office fit-out finishes
- Powder-coated and anodised frames
- Cladding panels
- Hotel bathrooms and public areas
FAQs: Three Ashes
Is Three Ashes too small for you to travel to?
No. Small places get the same service as large ones. Our area covers London and the South East counties. Good photos up front let us bring everything on the first visit.
Can you work at a site such as Berry Court Business Park, by Three Ashes?
Yes. Our area takes in Three Ashes and its surroundings, with estates and business parks such as Berry Court Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Does the weather affect the work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Does the colour affect how the joint performs?
Performance comes from the sealant type and the installation. We choose the right product for the joint first and then pick from its colour range with the same preparation and backing.
Are your applicators CSCS-carded?
Yes. We use CSCS-carded applicators.
Can you fit around our working hours?
Give us your site hours and any access windows in your enquiry, and we will schedule the work to suit. Our office runs Monday to Friday, 8am until 5pm.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so we’ll ask for the register before work on an older building. If anything suspect turns up, we stop until it’s tested.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we take into account:
- How much there is to seal
- The size and state of each joint
- How accessible the joints are
- Which sealant the job calls for
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a quote when you are ready.
What we need to price the job
It doesn’t need to be a full survey. A few details are enough to get going:
- Drawings or a marked-up plan, if available
- Where the site is, with the postcode
- Whether an asbestos survey exists
- Whether the building will be occupied during the work
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Diagnose, treat, sign off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. Rural sites near Three Ashes may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Let building users know which areas are affected
- Point out parking and an unloading spot
- Let us know about inductions and permits
Quotes
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to give us a call on 01277 525 020 or use the quote form.
Related advice
Also near Three Ashes
What else we do in Three Ashes
Leave it or put it right?
Across a chain of shops or hotels, consistency matters. Fixing the colour reference at the start keeps every site the same across the programme. Around Three Ashes, it’s better to renew all the failing joints at once. Send photographs of each area and we’ll quote for the lot.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Why us?
- 12-month guarantee on workmanship
- Clear, fixed quotes
- CSCS-carded applicators
- CHAS accredited contractor
Take a look at how commercial sealant jobs are priced or how we’re accredited.
Different surfaces, different methods
Brick and masonry
On brick, the sealant often matches the mortar rather than the brick face. We choose a suitable shade from the product’s range before work starts.
Hotel interiors
Phased resealing lets rooms go back into use quickly. Tell us your site hours and access windows and we’ll plan around them so rooms return to service in stages.
Coloured sealant around Three Ashes: what changes locally
Three Ashes is in the South East, one of the UK’s drier regions. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. At about 44 miles from central London, Three Ashes is within reach of the capital. The South East around the capital has large numbers of business parks, offices and retail centres, especially around the motorway corridors. Multi-site occupiers here often want one sealant contractor across all their buildings.
Offices at parks like Berry Court Business Park, 1.8 miles south-west of Three Ashes, have receptions, kitchens and glazed partitions where a tidy joint matters. Offices and shops close to stations such as Bramley (Hants) station (1.5 miles south-east of Three Ashes) tend to be busy all day, so sealant work is planned around opening hours. Occupiers with premises at both Berry Court Business Park and Stacey Industrial Park could have the sealant at each handled under one quote.
Three Ashes is about 3 miles east of Tadley, in Hampshire. Businesses, contractors and managing agents in Three Ashes can call on us for colour-matched joints. Three Ashes is one of 723 places in Hampshire on our list for colour-matched joints. Reading is covered too, some 8 miles away.
Postcode districts covered here: RG7. Sites close to Three Ashes are covered too, including Bramley (1 mile south-east), Mortimer West End (2 miles north), West End Green (2 miles east), Mortimer (2 miles north) and Bramley Green (2 miles south-east). Bigger towns within reach include Basingstoke (6 miles south), Farnborough (14 miles east), Fleet (12 miles south-east), Alton (14 miles south), Yateley (11 miles east) and Tadley (3 miles west).
What’s near Three Ashes
The nearest railway station is Bramley (Hants) station, roughly 1.5 miles south-east. A little further out are Calleva Museum (0.9 miles north-west) and Basingstoke and North Hampshire Hospital (4.8 miles south). Green spaces nearby include Daneshill Park Woods.