Selborne coloured sealant
Coloured and colour-matched sealant for visible joints across Selborne, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- A run of joints in mismatched shades
- Fit-outs with a sealant colour in the specification
- A bead that fights the cladding or frame colour
Need coloured sealant in Selborne?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Coloured sealant for commercial buildings in Selborne
Matching to anodised or powder-coated frames is a common request. The frame colour is checked against the sealant’s standard range, and you approve the choice. If the range has no close colour, a paintable sealant can sometimes be overpainted, where the specification allows. The enquiries we see most involve standard-colour sealant spoiling a high-end finish and joints that need to match a new RAL frame colour, across shop-fit joinery and counters, natural stone and brick and cladding panels. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, the work in Selborne is the same: the right product in a properly prepared joint.
Business units in the countryside around places like Selborne are often converted barns, stables or farmyards. Their mix of old walls with new frames, partitions and floors means many joints between unlike materials, and a sealant colour that suits the building’s character is often part of the brief.
A 12-month guarantee applies to all our work. If an installation problem shows up, call 01277 525 020 or email drawings and photos and we’ll arrange a return visit.
- Location
- Selborne (GU34)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Price
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: Selborne
Can the sealant on our Selborne premises match the finishes?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photographs and we’ll confirm what’s available for the product.
Does your area include sites such as Southlands Industrial Park, near Selborne?
Yes. We cover Selborne and the area around it, including industrial estates, business parks and retail parks such as Southlands Industrial Park. To start, just call the office on 01277 525 020 or email drawings and photos with the unit, the joints involved and your access times.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we will plan around them. You can reach the office between 8am and 5pm, Monday to Friday.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
How long does a typical visit take?
The duration is planned around your programme and the access we are given. We will give you an estimate of time on site when we quote.
Do you seal on top of existing sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Will your applicators have CSCS cards?
Yes. If you need card details for site access, tell us and we will confirm them with the quote.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. We will tell you if the real problem is any of the following:
- Exact bespoke colour matches beyond the product’s range
- Paint over sealant on joints that move too much
- A colour that never alters with age
If in doubt, call the office on 01277 525 020 or email us and we will say what we think before you book.
Where we work in Selborne
- Powder-coated and anodised frames
- Hotel bathrooms and public areas
- Shop-fit joinery and counters
- Cladding panels
- Natural stone and brick
- Office fit-out finishes
Surface by surface
Shop-fit and joinery finishes
In shops, joints are at eye level and inspected by customers. A sharp, even bead is as important as the colour.
Hotel interiors
Hotels use colour-matched sealant in bathrooms, bedrooms and public areas. Wet-area sealants come in colours other than white too.
Also near Selborne
More services for Selborne
Sealant on show in Selborne’s commercial buildings
At least three named trading, business or retail sites lie within about 3 miles of Selborne. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints. The South East is one of the drier parts of the UK. External joints still need dry faces and the right temperature, and damp or frosty mornings can hold work up.
If you have premises on more than one site, say at Southlands Industrial Park and Farringdon Industrial Centre, one contractor and one quote can cover both. For premises near Alton station, 3.8 miles north of Selborne, footfall is part of the plan: work is phased so shops and offices keep trading. If you run a unit on an estate such as Southlands Industrial Park, which lies east of Selborne, the trade counter, offices and staff facilities have joints to look after as well as the warehouse.
Selborne is about 4 miles south of Alton, in Hampshire. Across the GU34 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 723 places in Hampshire, from busy centres to rural villages. We also cover Portsmouth, around 21 miles from Selborne.
We cover the GU34 postcode districts. We cover commercial and managed buildings on Huckers Lane, Ganders Close and Selborne Road. Close to Selborne, our area also takes in Newton Valence (1 mile west), Empshott (2 miles south-east), Lower Green (3 miles south), Hawkley (3 miles south) and Oakshott (4 miles south). A short drive away, we cover Basingstoke (13 miles north-west), Fleet (13 miles north), Horndean (14 miles south), Aldershot (13 miles north-east), Alton (4 miles north) and Waterlooville (15 miles south).
Near you in Selborne
We work on buildings around The Jubilee Tap and the streets around them. Selborne’s nearest station is Alton station, roughly 3.8 miles north of the centre. Other landmarks nearby include The Romany Museum (under half a mile south-east) and Alton Community Hospital (3.5 miles north-west). Open spaces near Selborne include Selborne Hill and Deadwater Valley.
For managing agents and facilities managers
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
As a CHAS accredited contractor and Constructionline member, we are straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. For a building around Selborne, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- The sealant type is chosen for the joint first, then the colour.
- We compare your RAL reference or sample with the colours made for that sealant.
- A short trial length can be approved before the full run on visible work.
- We take out the existing bead, clean the joints and fit backing.
- We apply the agreed colour and tool it neatly, with masking where the finish needs it.
Before we start on site
- Share the asbestos register for older buildings
- Let building users know which areas are affected
- Clear stock, furniture or equipment away from the joints
Get a fixed quote
For a fixed quote, ring 01277 525 020 or email drawings and photos. You can also send details through our quote form.
Advice
Keeping the joints sound
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Keep the area clear while the sealant cures
- Insist on the agreed colour for any repair
- Standardise colours across a portfolio
- Settle the colour with the designer at the start
Give the sealant its full cure time before cleaning or handling the area. Fresh coloured beads show fingerprints and dust more easily, so brief cleaners and other trades.
Standardise the sealant colour on multi-site work. Consistency makes future work simpler for whoever reseals next.
Why act early in Selborne
Matching new joints to the existing ones is easier when the whole run is done together. Small repairs at different times rarely match. For buildings around smaller places like Selborne, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Whether it’s a single area or a whole estate, the same things set the price: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you’ll have a fixed figure to work with.
Why us?
- Work carried out by CSCS-carded applicators
- Clear, fixed quotes
- Colours confirmed for the specified product
- Health and safety: CHAS accredited
See what affects the cost and our accreditations and insurance.