Matching coloured sealant
Commercial sealant work in Matching for contractors, FMs and building owners: coloured and colour-matched sealant for visible joints, quoted at a fixed price.
- Shop fits that need consistent sealant colours across sites
- Coloured joints that have cracked with movement
- Old sealant that has yellowed, darkened or faded
Need coloured sealant in Matching?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Why deal with it now?
It’s far cheaper to approve a sample than to strip and redo a full run. A sample takes little time compared with replacing joints in the wrong colour. Converted and older buildings near places like Matching tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why choose Mastic Doctor in Matching
- Health and safety: CHAS accredited
- CSCS-carded applicators
- Products installed to the manufacturer’s instructions
- Colour options checked against the specified product
See how commercial sealant jobs are priced and our accreditations.
Coloured sealant in Matching, done properly
Architects, designers and brand teams often specify the sealant colour as carefully as the finishes around it. Standard sealant ranges cover many colours, so we check what the specified product is made in before we quote. We don’t promise an exact custom match, but we’ll show you the closest options. Most enquiries involve old sealant that has yellowed, darkened or faded and a bead that fights the cladding or frame colour, across natural stone and brick, cladding panels and office fit-out finishes. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Matching, that means joint design, primers and backing rod as standard.
In and around smaller places such as Matching, the commercial buildings we’re asked about are often pubs, shops, village halls and barns converted to offices. Kitchens, toilets and window frames in all of them need resealing sooner or later.
We sign every job off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Matching (CM17)
- Wider area
- Essex
- Guarantee
- 12 months on every job
- Quotes
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
On site: what to expect
Site rules come first: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you, and each area is checked before we leave it. Smaller jobs around Matching can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- You approve the colour, on site if it’s critical.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- We remove the masking and walk the finished joints with you.
Before we start on site
- Tell us your opening times and when work is allowed
- Warn occupants and staff about the work
- Confirm the product named in the specification
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
Looking after the joints
To get the most from the new sealant:
- Reseal whole runs rather than patching single joints
- Check a trial length in real light
- Keep harsh solvents away from visible joints
- Protect fresh coloured sealant from dust and handling
Expect some change in appearance over the years. That is normal for exposed sealant, and resealing restores the look when the time comes.
Standardise the sealant colour on multi-site work. Consistency makes future work simpler and easier to manage.
Sealant on show in Matching’s commercial buildings
Matching lies roughly 23 miles out from central London. This part of the South East is dense with business parks and out-of-town offices. Firms with branches across the South East can use one contractor for every site. The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates.
Refits at hotels like Down Hall Hotel (0.8 miles north-east of Matching) bring joints at vanity tops, bars and reception desks that guests see every day. If you run an office at a site such as Allen House Business Centre, 2.5 miles to the north-west of Matching, the sealant at reception desks, tea points and frames ages with each fit-out.
Matching is about 4 miles east of Harlow, in Essex. Matching sits inside our coverage and the rest of Essex, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Essex, 644 places are covered, Matching among them. Our London page has more on work in that area.
We cover the CM17 postcode districts for colour-matched joints. Just outside Matching, we also work in Newman's End (1 mile north), Matching Tye (1 mile south-west), Housham Tye (1 mile south-west), Loyter's Green (1 mile south) and Magdalen Laver (2 miles south). A short drive away, we cover Chelmsford (13 miles east), Harlow (4 miles west), Brentwood (12 miles south), Billericay (15 miles south-east), Loughton (11 miles south-west) and Waltham Abbey (11 miles south-west).
What’s near Matching
The closest station to Matching is Sawbridgeworth station, roughly 2.6 miles north-west of the centre. A little further out are Mark Hall Cycle Museum (3.2 miles west) and Princess Alexandra Hospital (4.9 miles west). Not far away are Sawbridgeworth Marsh.
Building owners, agents and FMs in Matching
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
When you manage a building on behalf of an owner, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Towns and villages near Matching
More services for Matching
When to call us in Matching
Exposure takes its toll on colour. Sunlight, dirt and pollution can darken, yellow or chalk the surface. A reseal brings the colour back in line.
Site and facilities staff are often the first to spot these:
- Coloured joints that have cracked with movement
- Untidy coloured beads with ragged edges
- Standard-colour sealant spoiling a high-end finish
- Discoloured joints on a visible elevation
Offices and shops close to stations such as Sawbridgeworth station, 2.6 miles to the north-west of Matching, tend to be busy all day, so sealant work is planned around opening hours.
What your quote should include
- Their public liability cover
- Will failed sealant be removed rather than covered?
- Will RAMS and insurance details be available?
- Can the work be phased to keep areas open?
FAQs: Matching
Does your area include sites such as Allen House Business Centre, near Matching?
Yes, sites like Allen House Business Centre are within our area, along with the rest of Matching. To start, just call the office on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Can you supply sealant in our brand colour for a site in Matching?
Yes, sealants come in a wide range of standard colours, and matching to RAL references, cladding, stone or frames is a common request. The quote lists the colours the product is made in.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators, which many sites require.
Can staff carry on working while you are here?
In the majority of cases, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we will confirm it when we quote.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Cost factors for colour-matched joints
Each job is priced on its own details. The things that drive the figure:
- Phasing around occupants
- Specialist products, such as fire-rated or hygienic sealants
- The size and state of each joint
- Whether old sealant has to be cut out first
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
Sending details for a quote
Good information means a firmer quote. Helpful details to send:
- When you need the work done
- Whether an asbestos survey exists
- Drawings or a marked-up plan, if available
- Specification clauses that apply
Send details, get a quote, we seal, guaranteed: that’s how every job runs. The first step is to call the office on 01277 525 020 or email us with what you know.