Coloured and colour-matched sealant in Great Kimble, Buckinghamshire
Coloured sealant in Great Kimble, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Old colour-matched joints lifting at the edges
- A run of joints in mismatched shades
- Smeared sealant on stone or joinery
Coloured sealant across Great Kimble
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Coloured sealant in Great Kimble, done properly
A coloured bead has to perform like any other sealant. Each joint is cleaned, backed to depth and tooled firmly onto both faces. Clean masking and steady tooling give the sharp lines colour work needs. We work on natural stone and brick, office fit-out finishes and cladding panels, and the failures we’re asked to look at most are shop fits that need consistent sealant colours across sites and weathered sealant that no longer matches. A single leaking joint is often how a building in Great Kimble first comes to us: we look at the rest while we’re there and tell you what we find.
Commercial sealant work around smaller places like Great Kimble tends to mean pubs and restaurants, halls, farm shops and offices in converted farm buildings. Kitchens, toilets and window frames in all of them need resealing sooner or later.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Great Kimble (HP17)
- Region
- Buckinghamshire
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Quoting for work in Great Kimble
Quotes vary with the job. It mainly depends on:
- How accessible the joints are
- Phasing around occupants
- Travel to remote or island sites
- The size and state of each joint
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Before you send an enquiry
For an accurate fixed quote, we need to understand the site. Send us:
- Where the site is, with the postcode
- Asbestos survey details if the building is older
- Photos of the joints, close up and from further back
- Your programme or deadline
To get a fixed quote, call 01277 525 020 or use the quote form, telling us the site location and the nature of the job. You can also send details through our quote form.
FAQs: Great Kimble
Can you work at a site such as Weston Way Industrial Estate, by Great Kimble?
Yes. We cover Great Kimble and the area around it, including industrial estates, business parks and retail parks such as Weston Way Industrial Estate. To start, just phone 01277 525 020 or email the details over with the unit, the joints involved and your access times.
Can you match sealant colours for premises in Great Kimble?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. The quote lists the colours the product is made in.
Can you send site paperwork?
Let us know which documents the site needs, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm them with the quote.
When can you be on site?
We’re in the office from 8am until 5pm, Monday to Friday. Tell us your site hours and access windows and the work will be fitted around them.
Is Great Kimble in your area?
Yes. We cover Great Kimble, and the simplest way to start is to phone 01277 525 020 or email us.
Are your applicators CSCS-carded?
Yes. Should the site need card details in advance, tell us and we’ll confirm them with the quote.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Why deal with it now?
Matching new joints to the existing ones is easier when the whole run is done together. Piecemeal repairs over several years tend to drift in colour, so a planned reseal often looks better value. One visit to deal with every failing joint makes more sense than several trips to a place like Great Kimble, rather than one at a time. Photos of every joint help us quote for the whole job.
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
What you get with us
- Fully insured
- Constructionline member
- A range of standard colours, depending on the product
- Colour agreed before work starts
Read what affects the cost or our accreditations and insurance.
How the job changes by surface
Natural stone
Stone has variation, so the aim is a colour that sits naturally against it. A stone-safe neutral-cure product is used in a colour chosen from its range.
Powder-coated and anodised frames
Metallic and anodised finishes are hard to match exactly with sealant. We’ll suggest the nearest standard colours for approval.
Towns and villages near Great Kimble
More services for Great Kimble
When it isn’t the sealant
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Colour variation across natural stone or brick that no single shade can match
- Paint over sealant on joints that move too much
- Stopping sealant from ever changing colour outdoors
Not sure which it is? You can give us a call on 01277 525 020 or use the quote form and we will tell you honestly before you book.
Where we work in Great Kimble
- Shop-fit joinery and counters
- Office fit-out finishes
- Natural stone and brick
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Cladding panels
What Great Kimble’s businesses ask us to seal
Great Kimble has two named business or industrial parks inside a 3-mile radius. Tenant changes on such sites bring fit-outs, and fit-outs bring new joints, often in a colour the occupier specifies. At about 35 miles from central London, Great Kimble is within reach of the capital. The commuter belt holds a great many offices, retail parks and business parks. If you have premises across the region, one contractor can cover them all.
For premises near Little Kimble station, under half a mile north-east of Great Kimble, footfall is part of the plan: work is phased so shops and offices keep trading. A business with units at Weston Way Industrial Estate and Station Approach Business Park needn’t use two contractors for its sealant. Trade counters and showrooms on estates such as Weston Way Industrial Estate, 2.7 miles north of Great Kimble, need neat joints where customers see them.
Great Kimble is about 5 miles south of Aylesbury, in Buckinghamshire. Businesses, contractors and managing agents in Great Kimble can call on us for colour-matched joints, as part of our coverage of Buckinghamshire. We work across 308 places in Buckinghamshire, from busy centres to rural villages. Sites around Oxford have their own page, about 18 miles away.
Business premises anywhere in HP17 are within our area for colour-matched joints. Streets here include Bridge Street, Hill View and Lower Icknield Way. We also cover Little Kimble (1 mile north-east), Askett (1 mile south-west), Lower Cadsden (1 mile south), Meadle (1 mile west) and Whiteleaf (1 mile south). A short drive away, we cover Aylesbury (5 miles north), High Wycombe (9 miles south), Chesham (9 miles east), Marlow (12 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).
Local landmarks in Great Kimble
Around Great Kimble, our work takes us to commercial buildings near The Swan pub and Princes Risborough School. Great Kimble has its own railway station: Little Kimble station. Other landmarks nearby include National Paralympic Heritage Centre (3.6 miles north) and Stoke Mandeville Hospital (3.4 miles north). Open spaces near Great Kimble include Beacon Hill and Brush Hill Local Nature Reserve.
How a job runs
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before the next one starts. For work around Great Kimble, we aim to finish in one visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First we agree which sealant type the joint needs.
- Your RAL reference, sample or photo is checked against that product’s colours.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Getting the site ready
- Agree which areas must stay open
- Flag any permit to work we’ll need
- Arrange parking or a loading space
Get a fixed quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or call 01277 525 020 or email a schedule or drawings to discuss it first.
Advice
Aftercare for building managers
Cleaning and maintenance staff play a part too. Share these points with them:
- Check a trial length in real light
- Standardise colours across a portfolio
- Keep the colour details for future repairs
- Protect fresh coloured sealant from dust and handling
Use gentle cleaning methods on coloured sealant. Harsh chemicals and scouring can change how the colour looks.
Settle the colour early in the project. Late decisions lead to substitutes and mismatches, so agree it with the designer at the start.