Gifford coloured sealant
Coloured and colour-matched sealant for visible joints in Gifford and across East Lothian. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Old sealant that has yellowed, darkened or faded
- Fit-outs with a sealant colour in the specification
- A bead that fights the cladding or frame colour
Need coloured sealant in Gifford?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Certain joints really need a specialist: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong normally costs more in the end than doing them right.
About our coloured sealant in Gifford
A colour-matched bead still has to work as a seal. Faces are prepared, depth is fixed with rod and the bead is tooled onto two sides only. Clean masking and steady tooling give the sharp lines colour work needs. We work on shop-fit joinery and counters, natural stone and brick and powder-coated and anodised frames, and the usual reasons a site gets in touch are patch repairs in several different colours and failed coloured sealant that has split or peeled. A single leaking joint is often how a building in Gifford first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Travel to smaller places such as Gifford is planned so the whole job is finished in one visit where possible: send photographs and a complete list so the right products and colours come on the day. If neighbouring businesses have work too, the visits can be grouped.
We stand by our work with a 12-month guarantee. That covers our preparation and application, and if something we did falls short, we return to it.
- Location
- Gifford (EH41)
- Region
- East Lothian
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Places near Gifford
More services for Gifford
What sets the cost
What shapes the price:
- Joint width, depth and condition
- How accessible the joints are
- The site’s rules and procedures
- Specialist products, such as fire-rated or hygienic sealants
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
What we need to price the job
To price the job accurately, we need a clear picture of the site. Send us:
- How the joints are reached, and at what height
- Where the site is, with the postcode
- Photos of the joints, close up and from further back
- Asbestos survey details if the building is older
Need a figure for a tender or a budget? We’ll quote against your scope and drawings that you can work with. If you have questions first, call the office on 01277 525 020 or email the details over.
When to call us in Gifford
Joints repaired piecemeal often end up in several shades. Mixed repairs over time leave a run of mismatched joints across one elevation. Resealing a whole run in one agreed colour tidies it up.
Any of the following is a good reason to get the joints checked over:
- Discoloured joints on a visible elevation
- Joints that need to match a new RAL frame colour
- Failed coloured sealant that has split or peeled
- White or grey sealant that clashes with the finish
A lasting commercial joint around Gifford begins with the old bead fully out and the faces clean and dry.
What to look for in a quote
- What level of public liability insurance do they hold?
- Their plan for phasing and protecting the area
- Health and safety accreditation such as CHAS
- Who will actually carry out the work
Why deal with it now?
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Fixing the colour reference at the start keeps every site the same across the programme. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Gifford before they leak.
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Colours confirmed for the specified product
- Constructionline member for supplier checks
- Health and safety: CHAS accredited
- Clear, fixed quotes
Take a look at our cost guide or how we’re accredited.
Questions we are asked in Gifford
Can you match sealant colours for premises in Gifford?
Yes. Colour matching to frames, cladding, stone and shop-fit finishes is a regular part of the work. Send colour references or photographs and we’ll confirm what’s available for the product.
Which documents can you supply for work in Gifford?
We will confirm the paperwork you need, such as RAMS, our insurance certificate and CSCS details, with the quote. We are CHAS accredited and a Constructionline member, with £5m public liability insurance and CSCS-carded applicators.
Are you CHAS accredited and on Constructionline?
Yes. We are CHAS accredited, we’re a Constructionline member and we use CSCS-carded applicators.
Are you fully insured?
Yes. Our insurance certificate can be sent alongside the quote.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote.
How long will the new sealant last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Work for main contractors and building owners
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
Sealant on show in Gifford’s commercial buildings
Gifford is in the east of Scotland, which is drier than the west. Cold, frosty mornings and condensation on steel and glass can still delay outside work. Outside work is booked with that in mind
For a hotel such as Tweeddale Arms Hotel, which lies west of Gifford, the colour of a joint at the bar or the bath matters to the look of the room.
Gifford is about 4 miles south-east of Haddington, in East Lothian. Across the EH41 postcode area, the process is the same: send details, get a fixed quote, we seal, and the work is guaranteed. We work across 48 places in East Lothian, large and small. We also cover Edinburgh, some 18 miles away.
Work on colour-matched joints is covered throughout EH41. Streets here include Main Street, High Street and Station Road. Nearby places we also cover include Bara (2 miles north-east), Bolton (2 miles north-west), East Saltoun (4 miles west), Garvald (4 miles north-east) and Dovecote (4 miles north-west) for colour-matched joints. Nearby towns on our patch include Musselburgh (12 miles west), Dunbar (11 miles north-east), Tranent (8 miles west), North Berwick (11 miles north), Prestonpans (10 miles west) and Cockenzie and Port Seton (9 miles north-west).
What’s near Gifford
A little further out are Roodlands General Hospital (4.2 miles north-west) and Yester Castle (1.6 miles south-east). The countryside around Gifford includes Lammer Law.
From enquiry to sign-off
Inspect, seal, sign off: every visit follows that pattern. We inspect the joints and confirm what’s in scope, then the work is carried out to the specified product and detail, and we finish with a walk round so the work can be signed off. Travel to smaller Scottish places like Gifford is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. External joints need a dry spell as well.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- We cut out the existing bead, clean and set the depth.
- Edges are masked and the coloured sealant applied and tooled.
- Masking comes off and the work is checked with you.
What we need from you
- Send any specification or drawings in advance
- Share your working hours and any access restrictions
- Tell us which areas need to stay in use
Ask for a quote
A handful of photographs and a postcode is the fastest way to a quote. Send them through the quote form, or call 01277 525 020 or send photos by email to discuss it first.