Findochty coloured sealant
Our CSCS-carded applicators take on coloured and colour-matched sealant for visible joints in Findochty and the surrounding area. Send details for a fixed quote.
- Standard-colour sealant spoiling a high-end finish
- Weathered sealant that no longer matches
- Dirty, discoloured joints in public areas
Need coloured sealant in Findochty?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Common problems we fix in Findochty
Colour-matched sealant is usually requested because a standard bead has spoiled the finish: white silicone against dark cladding, grey against timber or a yellowed bead on stone. A better-matched colour fixes the appearance without changing the joint’s job.
Look out for the following:
- Old colour-matched joints lifting at the edges
- Standard-colour sealant spoiling a high-end finish
- Untidy coloured beads with ragged edges
- Hotel refurbishments with a set colour scheme
Trade counters and showrooms on estates such as March Road Industrial Estate (2.2 miles south-west of Findochty) need neat joints where clients see them.
Questions to ask before you book
- Their plan for phasing and protecting the area
- What site paperwork they can supply
- How the joint faces will be prepared and primed
- Will CSCS-carded applicators be on site?
Coloured sealant in Findochty
A colour-matched bead still has to work as a seal. Each joint is cleaned, backed to depth and tooled firmly onto both faces, exactly as for a standard colour. Clean masking and steady tooling give the sharp lines colour work needs. We work on shop-fit joinery and counters, cladding panels and natural stone and brick, and what we are called in for most is standard-colour sealant spoiling a high-end finish and hotel refurbishments with a set colour scheme. For commercial sealant work in Findochty, you deal with one contact from quote to sign-off, whether it’s one building or several.
Scottish weather decides a lot about outside work in a place like Findochty: outside joints need dry, frost-clear surfaces, so we agree a window with some give in it. Indoor work isn’t held up by rain.
Our workmanship is guaranteed for 12 months, wherever the site is. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Findochty (AB56)
- Wider area
- Moray
- Guarantee
- A 12-month guarantee
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
How a job runs
In a busy building, we agree a sequence with your contact so the disruption stays in one area at once. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before we move to the next. Travel to smaller Scottish places like Findochty is planned so the job is finished in one visit where possible, so photographs, sizes and a full list matter. Outside work also needs a suitable weather window.
- We confirm the product the joint needs before talking about colour.
- Colour references, samples or photos of the finish are checked against the product’s range.
- Where colour is critical, a sample bead can be agreed in a discreet spot.
- We remove the existing bead, clean the faces and set the depth.
- The coloured sealant is applied and tooled with clean, masked edges.
Before we start on site
- Send your site hours and access windows
- Confirm the product named in the specification
- Agree which areas must stay open
Quotes
To get a fixed quote, give us a call on 01277 525 020 or use the quote form with the site address and an outline of the work. Our quote form is another easy route.
Related advice
Leave it or put it right?
A brand roll-out or multi-site fit-out benefits from a consistent sealant colour. Setting one product and colour for every site avoids variation from one fit-out to the next. Exposed buildings in Scotland take a lot of weather, and for a smaller place like Findochty, a repair visit takes planning, so it’s better to act early.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we’ll price your job on its own details.
Why us?
- 12 months’ guarantee on every job
- Products installed to the manufacturer’s instructions
- Work carried out by CSCS-carded applicators
- Public liability insurance in place
Read how commercial sealant jobs are priced and our accreditations.
How the job changes by surface
Office fit-outs
Office joinery and frames usually follow a colour scheme. We match from the product’s range.
Natural stone
Sandstone, limestone and granite each have distinct tones. We choose from the product’s range and agree the colour with you before the full run.
What sealant work can’t fix
We seal joints; we don’t mend everything behind them. Sealant alone won’t deal with:
- Colour variation across natural stone or brick that no single shade can match
- A colour that never alters with age
- Cleaning or repairing the surrounding finishes
Not sure which it is? You can call 01277 525 020 or send details through our quote form and we’ll tell you honestly before you book.
Where we work in Findochty
- Hotel bathrooms and public areas
- Cladding panels
- Powder-coated and anodised frames
- Office fit-out finishes
- Shop-fit joinery and counters
- Natural stone and brick
Commercial clients in Findochty
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so the building keeps working while we do.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Findochty can sit alongside others in a wider programme.
Sealant on show in Findochty’s commercial buildings
Findochty sits close to the coast, within about 1 mile. Buildings near the sea put their external joints through more driven rain, with salt air nearer the beach. Where a frontage needs a particular colour, the product still has to suit that exposure. Findochty is on Scotland’s drier eastern side. Cold snaps still affect when external joints can be sealed. Outside work is booked with that in mind
Whatever the building in Findochty, commercial sealant work starts with cutting out the failed bead and cleaning the joint back to sound material.
Findochty is about 3 miles north-east of Buckie, in Moray. We cover commercial sites throughout Findochty. Findochty is one of 59 places in Moray on our list for colour-matched joints. Our Aberdeen page has more on work in that area (48 miles or so).
We cover the AB56 postcode districts. Streets here include Main Street, Station Road and Blantyre Terrace. Being close to the A942 and B9020, Findochty is straightforward for us to reach. Just outside Findochty, we also work in Buckpool (1 mile north), Portknockie (2 miles east), Portessie (2 miles south-west), Rathven (2 miles south-west) and Ianstown (2 miles south-west). Bigger towns within reach include Lossiemouth (14 miles west), Keith (11 miles south), Ashgrove (15 miles west), Cullen (3 miles east), Fochabers (9 miles south-west) and Lhanbryde (12 miles west). Remote and island addresses take more planning, from travel and ferries to the weather, so mention the location when you phone 01277 525 020 or email a schedule or drawings.
Landmarks near Findochty
Other landmarks nearby include Findochty Castle (0.6 miles south-west) and Seafield Hospital (3.5 miles south-west).
More services for Findochty
FAQs: Findochty
Is Findochty too far out for you?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Where we can, we group nearby jobs to make the most of each trip.
Does your area include sites such as March Road Industrial Estate, near Findochty?
Yes. Our area takes in Findochty and its surroundings, with estates and business parks such as March Road Industrial Estate included. Photos and a short description are enough for a first look.
Who decides which product is used?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
Can the building stay open while you work?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Are you CHAS accredited?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member, which helps with supplier vetting.
Is coloured sealant weaker than white?
The colour doesn’t change what kind of sealant it is. A properly prepared and tooled joint performs as the product intends in any colour.
Is it fine to apply new sealant on top of old?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.