Beech coloured sealant
Coloured sealant in Beech, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Patch repairs in several different colours
- Fit-outs with a sealant colour in the specification
- White or grey sealant that clashes with the finish
Need coloured sealant in Beech?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle coloured sealant in Beech
Colour is often written into the specification, by RAL reference or by matching a sample. Standard sealant ranges cover many colours, so we check what the specified product is made in before we quote. An exact bespoke match can’t always be promised, so we talk you through the nearest colours. If you have marked sealant in hotel bathrooms and sealant that no longer suits recoated frames, we can put it right, whatever the surface. A single leaking joint is often how a building in Beech first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
A job in a smaller place like Beech is normally a single building. We plan the visit so everything on the list is done in one go, with the right products and colours on hand.
We stand behind the joints we seal: 12 months, guaranteed. It covers how we prepared and applied the sealant.
- Place
- Beech (GU34)
- Wider area
- Hampshire
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Looking after the joints
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. We suggest:
- Protect fresh coloured sealant from dust and handling
- Keep harsh solvents away from visible joints
- Insist on the agreed colour for any repair
- Note which sealant colour was used where
Use gentle cleaning methods on coloured sealant. Strong solvents and abrasive pads can dull or mark the surface over time.
Approve a sample where colour really matters. Seeing the cured colour in place avoids surprises.
Beech: questions and answers
Is Kerridge Industrial Estate, near Beech, within your area?
Yes. Estates, retail parks and business parks around Beech, Kerridge Industrial Estate among them, are all within reach. A few photos and the unit address let us price the work.
Is Beech too far out for you?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: its movement, its surfaces and what it has to cope with.
When can you be on site?
Give us your site hours and any access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
Will you come and look before quoting?
That depends on the size and complexity of the job. Simple work can often be priced from photos, and bigger or more complex jobs typically get a visit.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Cost factors for colour-matched joints
A fixed quote reflects the actual work. It takes account of:
- Removal of failed or old sealant
- Distance, for remote addresses
- Backing rod, priming and other preparation
- Quantities, in metres or numbers
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- The type of building and who uses it
- Where the site is, with the postcode
- Any dates the work must fit around
- Drawings or a marked-up plan, if available
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It won’t put right:
- Exact bespoke colour matches beyond the product’s range
- Restoring stained stone or masonry next to old sealant
- Materials with mixed tones that defy a single match
Not sure which it is? You can speak to us on 01277 525 020 or email the details over and we will tell you honestly.
Surfaces we seal
- Cladding panels
- Office fit-out finishes
- Shop-fit joinery and counters
- Hotel bathrooms and public areas
- Powder-coated and anodised frames
- Natural stone and brick
Also in Beech
Common problems we fix in Beech
Older sealant changes colour over time. Sunlight, dirt and pollution can darken, yellow or chalk the surface, so joints that once matched no longer do. A reseal brings the colour back in line.
Look out for the following:
- Patch repairs in several different colours
- Shop fits that need consistent sealant colours across sites
- Old colour-matched joints lifting at the edges
- Sealant that no longer suits recoated frames
If you have premises on more than one site, say at Kerridge Industrial Estate and Farringdon Business Park, one contractor and one quote can cover both.
Comparing quotes
- How joint depth will be controlled
- What the guarantee covers, and for how long
- Do they follow the manufacturer’s priming guidance?
- Their public liability cover
Surface by surface
Paintable sealants
Overpainting is most common on internal joints with little movement. If the joint needs a product that can’t be painted, we say so.
Hotel interiors
Hotels use colour-matched sealant in bathrooms, bedrooms and public areas. Wet-area sealants come in colours other than white too.
On site: what to expect
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, and the work normally takes a few hours or a phased programme, depending on joint lengths and how many colours are involved. If others near Beech need work, visits can be combined. You’ll have a fixed quote before work starts.
- We confirm the joint type and the product it needs.
- We compare the target colour with the colours available.
- The nearest colour is agreed, with a sample bead where needed.
- The existing bead comes out, then faces are cleaned and backed.
- We mask, seal and tool to a clean line.
- We remove the masking and walk the finished joints with you.
Preparing the site
- Send asbestos survey details if the building is pre-2000
- Send any specification or drawings in advance
- Tell us which areas need to stay in use
Ask for a quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Related advice
Coloured sealant in Beech: the local picture
The South East is one of the drier parts of the UK. Drier doesn’t mean dry every day, so frontage work still has some give in the dates. Beech has a number of hotels close by, all within 2 miles. Refits in hotels bring joints at vanity tops, bar counters and reception desks where the colour has to suit the scheme, with rooms done in turn while the rest stay let.
Trade counters and showrooms on estates such as Kerridge Industrial Estate (2.2 miles east of Beech) need neat joints where customers see them. For premises near Alton station, which lies east of Beech, footfall is part of the plan: work is phased so shops and offices keep trading.
Beech is about 2 miles west of Alton, in Hampshire. We cover Beech and the rest of Hampshire, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Hampshire, 723 places are covered, including Beech. Sites around Reading have their own page, about 21 miles away.
Postcode districts covered here: GU34 for colour-matched joints. Among the streets we cover are Wellhouse Road, Medstead Road and King's Hill. Nearby places we also cover include Thedden (1 mile north-west), Wivelrod (1 mile west), Bentworth (2 miles north-west), Holt End (2 miles west) and New Copse (2 miles west) for colour-matched joints. Nearby towns on our patch include Basingstoke (9 miles north-west), Winchester (14 miles south-west), Farnborough (15 miles north-east), Fleet (12 miles north-east), Aldershot (13 miles north-east) and Petersfield (10 miles south).
Local landmarks in Beech
The nearest railway station is Alton station, roughly 2.2 miles east of the centre. Other landmarks nearby include Barton Castle (4.3 miles west) and Alton Community Hospital (1.2 miles east). Open spaces near Beech include King's Hill.